Categories

Best Aluminum Caster

Globact Aluminum Alloy Front Caster Block&Steering Blocks and Rear Stub Axle Carriers kit with Ball Bearings Upgrade Parts for 1/10 Traxxas 2WD Slash, Stampede, Rustler, Replace 3632 3736 3752

  • RC 1/10 front caster steering blocks kit can be easily upgraded and replaced #3632 Caster blocks, #3736 Steering blocks, #3752 Stub axle carriers (rear)..
  • Front steering block knuckle kit is only compatible with 1/10 Traxxas 2WD Slash, Stampede, Stampede VXL, Slash VXL, Rustler, Rustler VXL, Ford F-150 Raptor RC vehicle ONLY..
  • Suitable for traxxas rustler 2wd steering blocks use aluminum alloy material, more wear-resistant, not easy to deform..
  • Multi-hole design, adjustable tie rod angle can be used for Traxxas Slash 2WD Caster Block.
  • Globact 2WD caster steering blocks Include(Necessary parts required for installation): 2*Rear Stub Axle Carriers, 2*Steering Block, 2*Caster Blocks (L/R), 6*Screw Pins, 2*Screw, 8*5x11x4mm bearings, 4*Gasket..
Check Stock

Razor Ripstik \G\ Caster Board, Black

  • Groundbreaking caster board that acts like a skateboard/snowboard hybrid.
  • Spinning aircraft-grade aluminum center tub for extreme grinding.
  • Pivoting deck and 360-degree caster trucks enable snowboard-like carving.
  • Spiked traction pads, kick tail and nose, and concave deck design.
Check Stock

Razor RipStik \G\ Caster Board (Black With Extra Wheels)

  • Groundbreaking caster board that acts like a skateboard/snowboard hybrid.
  • Spinning aircraft-grade aluminum center tub for extreme grinding.
  • Pivoting deck and 360-degree caster trucks enable snowboard-like carving.
  • Spiked traction pads, kick tail and nose, and concave deck design.
Check Stock

24\ Replacement Office Task Chair or Stool Base - Polished Aluminum Top - S4050

  • 24" wide replacement chair or stool base.
  • Standard 2" (50mm) center hole to receive standard chair gas cylinders.
  • Standard 7/16"x7/8" (11mm x 25mm) caster socket holes to receive standard caster mounting stems.
  • Polished aluminum top with un-painted underside.
Check Stock

AMOGOT RC Alloy Front Caster Block Steering Blocks Rear Stub Axle Carriers kit with Ball Bearings for 1/10 RC 2WD Slash Stampede Rustler Replace 3632 3736 3752 Upgrade Parts Red

  • 【Suit for 】Compatible with 1/10 RC Slash 2WD, Stampede 2WD, Stampede VXL, Slash VXL, Rustler 2WD, Rustler VXL, Ford F-150 Raptor RC Cars Trucks.
  • 【Material】: Made of High quality aluminum alloy,Lightweight and Durable performance.The rc upgrades parts High protection and long durability.
  • 【Easy to install】RC 1/10 Front Caster Steering Blocks kit can be easily upgraded and replaced #3632 Caster blocks, #3736 Steering blocks, #3752....
  • 【Perfectly designed】Rear Stub Axle Carriers With Multi-hole design, adjustable tie rod angle.
  • 【Package Included】1Pair Rear Stub Axle Carriers 1Pair Steering Block 1Pair Caster Blocks (L/R), 8Pcs Suspension Screw Pins, 2Pcs Screw, 8Pcs....
Check Stock

Camber Gauge Digital Wheel Alignment Tool -90° to +90° Wide Range Wheel Alignment & Balancing Tools Accurate Caster Camber Gauge with Digital Display & Powerful Magnet & Positioning Bubble & Reset Key

  • ... eccentric bolt to make the camber alignment tool reach to the expected value. After resetting, the digital camber gauge can keep the last reference value upon turning the power on or off..
  • 【Wear-resistant and Drop-resistant Caster Camber Gauge】The camber caster gauge is made of high density aluminum, which is wear-resistant and drop-resistant, providing you with a long service life..
Check Stock

Heavy Duty Replacement Office Chair Base - 28\ Aluminum - S4164

  • Heavy Duty 28" Polished Aluminum Chair Base.
  • Standard 2" (50mm) center hub hole to receive standard 2" gas lift cylinders.
  • Standard 7/16"x7/8" (11mm x 25mm) sockets to receive standard chair caster stems.
  • HD - Built to hold more weight and withstand more than standard chair bases.
Check Stock

CODA RACING RC Alloy Caster Block&Steering Blocks for Traxxas 1/10 4X4 Slash Stampede Rustler 4WD -Replaces Part 6837 6832

  • Easy upgrade replace Traxxas stock part #6832 Caster blocks(c-hubs)，#6837 Steering blocks.
  • Fits: Traxxas 1/10 Slash 4X4 ,1/10 Stampede 4X4,1/10 Rustler 4X4,1/10 Slash 4X4 VXL Ultimate Platinum,1/10 Stampede 4X4 VXL,1/10 Rustler 4X4 VXL.ST....
  • Precision CNC machined,Anodized 6061-T6 aluminum for lightweight and durable performance..
  • Includes Caster blocks&Steering blocks(L/R),5x11x4mm bearings(2),10x15x4mm bearings(2),Bushing Sleeves(4),Screws(6),PTFE washers(2),Suspension Screw....
Check Stock

JEGS 80077-1 Replacement Rear Caster For JEGS 3-Ton Aluminum Jack (555-80077)

  • Fits JEGS Professional Low-Profile 3-Ton Aluminum Floor Jack (555-80077).
  • Sold Individually JEGS 80077-1 rear caster is just one of the replacement parts offered for our 555-80077 professional low-profile 3-ton aluminum floor jack. Easily installed, the castor will help keep your jack mobile and safe..
Check Stock

Nefish 4 Pack Leveling Casters Heavy Duty for Workbench 2200 LBS Capacity, Upgraded Handle Design Retractable Caster Wheels Set of 4, 360 Degree Swivel Castors for Machine, Equipment, Shelves

  • ...rfect position that uses it. A leveling caster can go up or down, moving the equipment it's attached to along with it..
  • 【Absorb Shocking and Reduce Vibrations】 - Nefish black leveling plate caster wheels are made of rubber pads, stainless steel stamping top plate, aluminum body. Once leveling casters are installed, the rubber pads can absorb the vibrations from the device while it's in operation, This could lead to a safer work environment or, at the very least, a quieter work environment..
  • 【WIDE APPLICATIONS】- Nefish retractable casters uses an anti-vibration rubber pad to secure it to the floor. Once the pad is lowered, the application will not move. Unlike a locked swivel caster, the pad won’t wobble and will remain stable. Suitable for heavy workbench, kitchen island, machine equipment, medical machinery, communications equipment, heavy furniture, cabinet etc..
  • 【Premium Service】- To ensure the casters quality, we will arrange personnel to carefully check the products, only the passed the inspection can be delivery. If you are not satisfied, we'll give you a 100% refund within 60 days of purc....
Check Stock

Weber # 70360 Locking Caster

  • Genuine Weber OEM part # 70360 Locking Caster and Insert..
  • Includes: 1 Locking Caster, 1 Caster Insert, and Instruction Sheets..
  • Caster features the wheel locking mechanism. This caster wheel helps you keep your unit mobile for easy transportation and locking mechanism will keep....
  • Caster diameter: 2-7/8". Caster Stem length: 1-1/4"..
  • Fits: Spirit series (2009-2012), Genesis series (2007-2011), and Summit series gas grills (2007-2011)..
Check Stock

CODA RACING RC Alloy Caster Block&Steering Blocks&Rear Stub Axle Carriers for Traxxas 1/10 2WD Slash, Stampede, Rustler, Nitro Slash-Replaces Part 3736 3632 3752

  • Easy upgrade replace Traxxas stock part #3632 Caster blocks，#3736 Steering blocks,#3752 Stub axle carriers.
  • Fits: Traxxas 1/10 Slash 2WD ,1/10 Stampede 2WD,1/10 Rustler 2WD,1/10 Ford F-150 Raptor,1/10 Nitro Slash 2WD,Bigfoot 2WD.
  • Precision CNC machined,Anodized 6061-T6 aluminum for lightweight and durable performance..
  • Includes Caster blocks&Steering blocks(L/R),Stub axle carriers(L/R),5x11x4mm bearings(8),PTFE washers(8),Suspension Screw Pins(6),Screws(2),Washers(4).
Check Stock

SHOPCraft 12 Pan 5\ Spacing Commercial Aluminium Bun Racks, NSF Listed Heavy Duty Speed Rack for Bakery, Restaurant & Catering, 12 Tier 20.5\ x 26\ x 70\ Speed Rack with Heavy Duty Plate Casters

  • Unmatched Quality: The SHOPCraft TX-125 Pan Rack is made from commercial grade aluminum. The racks have a higher gauge aluminum construct that make them stable and durable than other cheaper market offerings. A SHOPCraft rack will last you a lifetime. The trusted choice for serious bakeries, restaurants and foodservice companies..
  • For Industrial & Commercial Use: The SHOPCraft TX racks are meant for heavy use. The racks are built to withstand heavy usage around the clock, unlike other racks that eventually breakdown, our racks are built for life. The TX end load rack is designed to hold standard 18” X 26” bakers sheet or bun pans. Rack total capacity is 350 Lbs. This rack has 12 tiers with 5" spacing..
  • Heavy Duty Casters: The non-marring 5” X 1 ¼” wide polyolefin wheels will sustain the most demanding environments. The gusset points that tie the rack together are designed to provide stability and strength when loaded to full capacity..
  • Design & Function: Atheistically pleasing, it is constructed of heavy gauge aluminum sheet. The TX rack by Schaumburg Specialties incorporates a heavy duty plate caster that will out preform the typical stem caster commonly used on other racks. The racks are easy to wipe down after a day of heavy use..
Check Stock