Best Aluminum Coil Supplier
RUJOI Bike Seat Posts,Bike Adjustable Suspension Seatpost 27.2mm 31.6mm Alumium Seatpost for MTB Road Bike,Quick Release seatpost clamp Included
- Spring Coil Suspension Comfortable :Build-in spring coil inside to absorb the vibration and shocks while riding, refound force and hardness can be adjustable by bottom screw depend on versiabily . It will comfort your riding experience on long cycling .and improve your riding experience..
- Adjustable Saddle clamp angle : It can adjust between -5 degree to +18 degree.With 2 bolts hold the clamp, enhance safe and easy to install..
- Superior quality: Made with Aluminum 6061 by Famous Taiwan supplier ,meet with safety standard ISO 4210..
- All Seat Post bundled with Quick Release Bicycle Seatpost Clamp : the 27.2 mm bundle with 31.8mm ,and 31.8 bundle with 34.9mm ,The material made by 6061-Au for you to quickly adjust the seat post height and take off easily and quickly..
- Note: Choose Correct Diameter Size is important .Wrong size will not fit your seat tube .A:Take out your current seatpost, the diameter marked on it’s lower area. If it didn't show on it ,then measure your bike seat tube correctly.
Check StockDetroit Axle - Front Quick Struts & Coil Spring Assembly + Sway Bar Link + Inner & Outer Tie Rod End w/Boots Replacement for 2003 2004 2005 2006 Toyota Tundra - 10pc Set
- Compatible With 2003 Toyota Tundra 2004 Tundra Shocks 2005 Tundra Struts 2006 Toyota Tundra Struts. Front Struts Complete Assembly Pair Sway Bar End Links Front Sway Bar Link Inner Tie Rod Outer Tire Rod End Boots.
- This Kit Is Direct Replacement For All Models For 2003-2006 Toyota Tundra. Amortiguadores Delanteros Front Struts And Shocks Complete Assembly Strut Assembly Inner Tie Rod End Outer Tierod.
- This Kit Inludes Front Strut Kit & Coil Spring Assembly, Front Sway Bar Link Kit. Strut Mount Kit Strut Spring Assembly Front Spring Front Coil Spring Stabilizer Sway Bar Barra Estabilizadora Delantera Tie Rod End Boots.
- Compatible With 2004 Toyota Tundra Front Struts 2005 Toyota Tundra Front Struts 2006 Tundra Front Struts. Front Strut Assembly Coil Struts Stabilizer Bar Link Tire Rod Front Tie Rod End.
- 10-Year Warranty. Detroit Axle Is A Leading Supplier Of Brake Kit, Front Suspension Kits. The Parts In This Kit Are Compatible With Toyota Tundra Front Strut Assembly Full Set Sway Bar Link Strut. Strut Coil Spring Assembly Sway Bar End Link Front Strut And Spring Assembly Stablizer Link Sway Bar Stabilizer Link Tie Rod Assembly.
Check StockMotorcraft DG508 Ignition Coil
- Motorcraft partners with many suppliers to product their products so although in a Motorcraft box and made to Motorcrafts specifications, this product may have been produced by an approved Motorcraft supplier.
- Durable and reliable under extreme conditions.Ignition coil part is compatible with various Ford, Lincoln and Mercury models from 1997 to 2018.
Check StockDryer Heating Element Assembly (3 Wire with Shell) DC93-00154A By Primeswift Replacement Part for Samsung 3282568,PS4216214
- [Part Includes]:This replacement dryer heating element assembly includes heating element,housing duct,high limit thermostat,and thermal fuse,and specific for Samsung models.
- [More Details]:This heating element is a dual coil element that has 3 wires that connect to the heating element coil.
- [Directly Replaces]:3282568,AP5582094,PS4216214,EAP4216214.
- [Fixes Symptoms]:The element on the inside failed.
- you want to change out the complete assembly versus just the element.
- [About Us]:Primeswift is a worldwide leading supplier and distributor of aftermarket appliance and outdoor parts. Our goal is to provide our customers with quality aftermarket parts that meet or exceed OEM specifications at competitive prices.
Check StockBLUEFIRE J9802B 1/4lb Flux Cored Low Temperature Aluminium Brazing Coil All Purpose Welding Coil for Almost All Metals Soldering Propane Torch Universal Welding Rods flux Free
- ...lux.In addition, the coil design of brazing rods is more convenient to carry than the rod design, you can use the brazing rods coil in your pocket for repair work anywhere and whenever it's needed. A great and thoughtful design!.
- 【Universal Magic Alloy】BLUEFIRE flux cored welding coil is mainly made of zinc aluminum alloy,which can be used for brazing copper and aluminum, aluminum and aluminum, aluminum and stainless steel, aluminum and steel, etc.More specificly,BLUEFIRE flux cored welding coil can be used for brazing transformer,reactor,condenser, evaporator, radiator,motor, battery or other household appliances.You can use it to complete most of the brazing work in life..
- 【Easy to Melt and Flow】BLUEFIRE flux cored brazing rods coil can melt at 752°F and have very good fluidity with good capillary attraction.In addition, BLUEFIRE flux cored welding wire is not only corrosion-resistant, but also is post-braze cleaning unnecessary. It's characteristics of high thermal conductivity and high conductivity make the welding effect full and smooth.It fits both professionals and amateurs..
- 【Moistureproof】BLUEFIRE flux cored welding wire won't absorb water, so it can be stored in various environments for a long time. The special moisture-proof....
Check StockPower Acoustik 12" Woofer Dual 4 Ohm 2500W Max
- Overcompensating Motor Structure for Increased Magnetic Strength, 12mm T-Yoke & Top Plate Improve Low-Frequency Dynamics, Vented T-Yoke & Frame Reduces Voice Coil Heat Build-up, Die-Cast Aluminum Heat Sink Dust Cap Absorbs Voice Coil Heat, Aluminum Dust Cap Fins Dissipate Heat & Strengthen Cone.
- Non-Magnetic Non-Resonate Die-Cast Aluminum Frame, 2.5” 4-Layer Voice Coil w/ Large Gauge Wire Increases Power, High-Temperature Tolerance Adhesives Resist Thermal Failure, Nickel Plated 8ga Spring-Loaded Compression Wire Terminals, Non-Transfer Spruce Pulp Cone w/ UV & Chemical Protection.
- High-Density Polyether Foam Surround w/ UV & Chemical Protection, Dual Poly-Cotton Suspension Dampen Violent Accelerations, Stitched Voice Coil Leads Prevent Potential Damage, 1-pc Gasket/Trim Ring w/ Concealed Mounting Holes Included.
- Efficiency (1w/1m): 86.50, Voice Coil Configuration: 2.50″ Dual 4Ω, Motor Volume: 254oz Re: 7.230Ω Fs: 28.60Hz Qes: 0.416 Qms: 4.722 Qts: 0.383 Diameter: 12”.
- Vas: 1.69ft3 Bl: 24.55tm Mms: 200.815g Cms: 152.013 Sen: 86.56db MAX Power: 2,500w RM....
Check StockDRIVESTAR UF501 set of 4 Ignition Coils 2004-2011 for Mazda RX-8 1.3L
- ... automotive parts that fit both the vehicles of today and of the future.
- TRUST IN NGK NTK: Explore components built by the world leader in the design of spark plugs and oxygen sensors. Their attention to performance excellence is what has differentiated them from the competition and allowed them to be the number one supplier of spark plugs and oxygen sensors.
Check StockMemphis MJM622 6.5' 700W RMS Dual 2-Ohm MOJO Series Subwoofers
- Features and Specifications: Vented cast aluminum basket, Fiberglass reinforced cone, Stitched foam surround, Heat dissipating aluminum heat sink, 4-layer copper 1.5″ voice coil, DVVC (Direct Vent Voice Coil) Cooling, Size: 6.5″, Power Handling: 700W RMS Power | 1400W Peak Power. Sensitivity: 82dB, Magnet Size: 80 oz, Mounting Depth: 5″, Cut Out Diameter: 5.95″, and Voice Coil Diameter: 1.5″..
Check StockSet of 8 Motorcraft Ignition coil DG-508 & 8 Motorcraft spark plug SP-413
- Motorcraft partners with many suppliers to product their products so although in a Motorcraft box and made to Motorcrafts specifications, this product may have been produced by an approved Motorcraft supplier.
- Durable and reliable under extreme conditions.Ignition coil part is compatible with various Ford, Lincoln and Mercury models from 1997 to 2018.
Check StockSundown Audio X-8 Series Subwoofers 800W RMS/Subwoofer (Pair X-8 V.3 D2 8' Subwoofers)
- Black Aluminum 2.5” voice coil former for superior heat dissipation.
- Solid Pole piece with chamfered edges & machined air channels for increased voice coil cooling.
- High strength & patented cast aluminum frame.
Check StockNVX VSW84v2 8 inch VS-Series Car Audio Subwoofer - Dual 4 Ohm Voice Coil 500 Watts Peak & 250 Watts RMS
- 8" VS-Series Version Two Car Subwoofer with a 4 Ohm Dual Voice Coil.
- Power Handling: 250 watts RMS - 500 watts Peak | Sensitivity: 85 dB (1W/M) | Resonance Frequency (Fs): 36 Hz | Frequency Response: 20 - 200 Hz.
- 2.5” Aluminum Voice Coil: Each of our subwoofers is equipped with a 2.5” aluminum voice coil, providing maximum current distribution throughout....
- Accurate Hard-Hitting Bass: The VS-Series subwoofers pack a massive punch when it comes to bass output. Our subwoofers are designed with a non-pressed....
- Aluminum Shorting Ring: What makes our subwoofers stand out from other subwoofers on the market is the aluminum shorting ring. The ring is a....
Check StockPrecision Port 2' Flared Speaker Cabinet Port Tube Kit
- ...in high output amplifier & RCA/speaker line input.
- RUBBER EDGE SUSPENSION: The high-performance car woofer speaker has a specially treated black rubber edge suspension that completes your woofer enclosure system. Total size measures 10.4” H x 20” W x 9.6” D. Also features blue LED light behind the grill.
- 1.5” ALUMINUM VOICE COIL: This car speaker has a 1.5” aluminum voice coil with a 4-ohm impedance rating that compensates the undersized wire found in most cars. Ultimately reduces distortion so you can enjoy a crisp & clear sound.
- BLUE POLYPROPYLENE CONE: Pyle follows the standard size for most car stereo systems & created this 8" high power 4-ohm subwoofer w/ blue polypropylene cone perfect for new speaker construction, replacing worn or blown speakers.
- 35Hz - 800Hz FREQUENCY: The 1.5” aluminum voice coil provides the punch, while the bass reflex vent adds even more sub-bass, ultimately achieving a frequency response of 35 Hz to 800 Hz. It is also super easy to install to your vehicle's sound system.
- One 8'' High Power 4 Ohm Subwoofer - 1.5'' Aluminum Voice Coil.
- Built-In High Output Amplifier - Bass Reflex Vent for Added Sub-Bass Response.
- Blue LED Light Behind The Grill - 250 Watts Max Power Handling.
- Blue Polypropylene Cone - RCA/Speaker Line....
Check StockMJMECHEV8D1 Select Chevy Trucks (2) MOJO 8" Subwoofers Custom Enclosure
- Features and Specifications: Vented cast aluminum basket, Fiberglass reinforced cone, Stitched foam surround, Heat dissipating aluminum heat sink, 4-layer copper 2" voice coil, DVVC (Direct Vent Voice Coil) Cooling, Size: 8", 900W RMS Power | 1800W Peak Power. Sensitivity: 82 dB, Magnet Size: 105 oz, Mounting Depth: 5.75", Cut Out Diameter: 7.32", and Voice Coil Diameter: 2"..
Check Stock