Categories

Best Aluminum Fifth Wheel Tailgate

EAZ-Lift 12-inch Gooseneck Adapter | Converts Fifth Wheel Trailers to Gooseneck Trailers | Easy to Install | (48500)

  • Converts Fifth Wheel Trailer to Gooseneck: Adapts a fifth wheel trailer to fit gooseneck trailer hitch.
  • The locking coupler attaches to any 2 5/16-inch gooseneck ball.
  • Fit Type: Universal fit for all stationary pin boxes.
  • Provides Easy Towing: Tows a fifth wheel trailer without a large hitch taking up the bed of truck.
  • Simple to Hookup and Disconnect: Locking gooseneck coupler allows full range of motion for simple hookup and disconnect.
  • Rating: Rated to 30,000 lb. (7,500 lb. vertical load).
  • Easy to install: Includes all parts and hardware needed for installation.
Check Stock

EAZ-Lift 17-inch Gooseneck Adapter | Converts Fifth Wheel Trailers to Gooseneck Trailers | Easy to Install | (48490)

  • Converts Fifth Wheel Trailer to Gooseneck: Adapts a fifth wheel trailer to fit gooseneck trailer hitch.
  • The locking coupler attaches to any 2 5/16-inch gooseneck ball.
  • Fit Type: Universal fit for all stationary pin boxes.
  • Provides Easy Towing: Tows a fifth wheel trailer without a large hitch taking up the bed of truck.
  • Simple to Hookup and Disconnect: Locking gooseneck coupler allows full range of motion for simple hookup and disconnect.
  • Rating: Rated to 30,000 lb. (7,500 lb. vertical load).
  • Easy to install: Includes all parts and hardware needed for installation.
Check Stock

6 ft. Aluminum Folding Ramp Mfg in The USA, 400DR - ATV/Snow Blower Ramp

  • In Stock with a delivery time of 1 to 5 days. Photos illustrate loading onto a F-250 with a 36" high tailgate. Made in the USA and manufactured with the finest 6005T5 aluminum alloy. Two safety straps and safety instructions included. One year limited warranty..
  • Lightweight, weighing only 30 lbs. The ramp is 5'-11" long (incl. red tips) by 40" wide. Folds to 20" wide for easy storage..
  • 1,000 lb. 4 wheel distributed load capacity. Serrated cross-rod design spaced 2-3/4" apart for excellent traction..
  • This 6 ft folding ramp will work when loading snow blowers or small/midsize ATV's onto a 36" high tailgate. However you may prefer a 7 ft long ramp. A longer ramp will reduce the loading angle. This ramp is NOT recommended for loading motorcycles up the middle of the ramp. It's designed for 4 wheel and 2 wheel side by side loading (i.e. snow blower). For ramps with stronger center support, built to handle the weight of a large motorcycle riding up the center please look for the MCDR ramps..
  • This model is available in a similar less expensive model. SEARCH #400 Ramp. The 400 ramp has the cross-rods spaced 5-1/2" apart..
Check Stock

Air Lift 57390 LoadLifter 5000 Air Suspension Kit

  • Fully adjustable air springs to level your vehicle when towing or hauling a heavy load for a safe comfortable ride.
  • Up to 5,000 pounds of load leveling capability.
  • Easy to install with included detailed instructions.
  • Fitment details listed in the product description. Lifetime Warranty with 60 day Ride Satisfaction Guarantee.
  • Fits single-rear-wheel (SRW) and dual-rear-wheel (DRW) models. Will fit ALL models without a fifth-wheel hitch and will also fit most side mount fifth....
Check Stock

OGIO Renegade RSS Laptop Back Pack

  • 【FUNCTION】 The 5th wheel pin puller is designed to release the 5th wheel lock easily and quickly, no need to climb under the trailer. Multi-function hook design can pull and move objects easier..
  • 【WIDELY APPLICATION】 This fifth wheel puller hooks is used for the 5th wheel lock, and moving almost any heavy objects, such as roller garage doors, carts, stack of crates, etc. Very easy to use..
  • 【PREMIUM MATERIAL】 Our fifth wheel pin puller hook is made of solid steel and plated chrome, very strong for a long lifetime use and easy to keep clean. The heavy duty and high quality material make your work easier more efficient..
  • 【CONVENIENT DESIGN】 The 5th wheel puller hook is upgrade designed for splicable 2 part, the length of each one is 16 inch, very convenient to store in your tool box or cab and easy to carry..
  • 【SIZE】 Total length: 32", Puller rod dia: 0.4", Handle dia: 1", Handle length: 5", Package: 1 Pack..
Check Stock

Mopar 82214743 25,000 lb Direct Mount Fifth Wheel Hitch

  • Genuine OEM Parts and Accessories offered by Mopar (the Original Equipment Parts Supplier for Chrysler, Dodge, Jeep, Ram and Fiat vehicles).
  • The 360 degree pivoting head also helps enable a smooth and quiet ride.
  • Color-coded engagement indicator provides an in-cab visual confirmation of proper hook-up.
  • Install on trucks with either production Fifth Wheel/Gooseneck prep or Mopar Fifth Wheel prep.
Check Stock

AMPLOCK U-LPCVRS Fifth Wheel Lock for Pull rite or Sidewinder

  • Molded exactly to fit the specific shape of your fifth wheel when unhitched.
  • Materials used by AMPLOCK provide good rust resistance for use in all climates.
  • Easy to use with AMPLOCK’s push and lock system.
  • The strongest lock to secure your fifth wheel made with high quality materials and control and identification key system.
Check Stock

Draw-Tite Reese Fifth Wheel Hitch Mounting System Custom Bracket Compatible with Select Chevrolet Silverado GMC Sierra

  • vehicle specific fifth wheel custom quick install brackets available.
  • kits also available that include fifth wheel mounting rails and vehicle specific brackets.
Check Stock

Lippert 191023 JT's Strong Arm Fifth-Wheel Jack Stabilizer Kit

  • ELIMINATES CHASSIS MOVEMENT — The JT’s Strong Arm Stabilizer Kit is designed to eliminate chassis movement in your 5th wheel RV or travel trailer using the same engineering as a race car chassis.
  • EASY INSTALLATION — With no welding required, this system can easily bolt-on to your landing gear and RV’s frame for a one-time installation.
  • THREE CONFIGURATIONS — Available in three sizes: Standard 5th Wheel Kit, Short 5th Wheel Kit and Travel Trailer.
  • COMPATIBILITY — This stabilizer kit was designed to work with most major RV jack assemblies — including, scissor, front landing gear and telescoping.
  • FULLY EQUIPPED — Kit comes complete with inner tubes, outer tubes and all necessary mounting and installation hardware.
  • RV fifth-wheel jack stabilizer kit comes complete with everything needed for DIY installation.
  • Designed to eliminate side-to-side and front-to-rear RV movement and shaking.
  • Stabilizer bars form triangles at front and rear jacks to prevent shaking and swaying.
  • The kit was designed for installation by your dealer or the do-it-yourself on fifth-wheel RVs with 58 inches or greater distance between the two front landing gear legs.
Check Stock

ENIXWILL Fifth Wheel Gooseneck Hitch Adapter Plate for Pickup Truck Bed，25,000 lbs, 2-5/16-Inch Ball

  • Maximum Functionality：This uniquely designed gooseneck hook is used to fit into the existing 5th wheelbase track in the truck bed and enable gooseneck towing..
  • Feature： 2-5/16 Inch Ball，this fifth wheel gooseneck hook has been tested and has a rated towing force of 25,000 pounds,The total weight of the trailer is 6,250 pounds..
  • High-quality materials:The surface treatment adopts plastic-sprayed black orange peel pattern, which can resist the influence of rain, snow, dirt and other corrosive elements, and the appearance is beautiful and durable..
  • Instructions：The 5th wheel gooseneck hook adapter plate can be placed on the truck axle or flipped and set to a 3 inch rearward displacement..
  • Easy Installation：This fifth wheel gooseneck hitch adapter plate can be easily installed and removed. Just drop it into the 5th wheel hitch rails and fix it with the 4 attached connecting pins..
Check Stock

WEIZE Durable Gooseneck Tripod Stabilizer for Trailer or 5th Wheel, Heavy Duty Adjustable from 30" to 44", 7500lb Load Capacity, 2 5/16-inch Ball

  • GREATER STABILITY: The gooseneck tripod stabilizers are set up beneath the overhang of a fifth wheel or trailer, provide stability to a parked fifth wheel and reduce the side-to-side and back-and-forth rocking most RVers feel as they move around their rig..
  • STURDY: Heavy duty steel and powder-coating finish provide maximum strength and longevity for these rust-resisting gooseneck stabilizers. The chain is also zinc-plated..
  • EASY OPERATION: The tripod stabilizer has a 7500 lb. load capacity and is adjustable from 30" to 44" in height by simply moving the foot pads inward or outward, fine-tuning the stabilizing adjusting lever..
  • COMPATIBILITY: The rv trailer tripod stabilizer works for a horse trailer, gooseneck trailer, or fifth wheel that has a gooseneck adapter installed, it will not be compatible with vehicles equipped with Anderson Ultimate hitches..
  • WARRANTY: 2-Year guarantee. WEIZE gooseneck stabilizer aims for quality followed up with quality customer service directly provided by manufacturer. A satisfied solution will be given for ANY of your problems. Our support ....
Check Stock

Camp'N Fifth Wheel Hitch Lube Plate - 10' Ultra Low Friction Lube Disc

  • ➊ ULTRA LOW FRICTION and wear resistant without that messy grease! Designed and engineered unlike the others with our high performing "dimple design" to reduce surface area contact.
  • ➋ EXTENDS THE LIFE of your hitch pin plate and receiver by using the Camp'N Fifth Wheel Hitch Plate. The lube plate or disc takes the sacraficial beating while preserving your fifth wheel hitch.
  • ➎ Please checkout the Camp'N Amazon Storefront for additional replacement rv parts.
Check Stock

Tri-fold ATV Ramps, 1500lbs Extra-Wide Aluminum Loading Ramps, Heavy-Duty Multi-Purpose Powersports Loading Ramps for Pickup Trucks, Snowmobile,Lawn Mower, Garden Tillers, Motorcycle

  • 【EXTRA-WIDE ALUMINUM LOADING RAMPS】 Extra-Wide 54″ Multi-Purpose Aluminum Loading Ramp can handle a variety of different loads, and will not leave you limited..
  • 【MULTI-PURPOSE LOADING RAMP】 Excellent for loading ATVs, dirt bikes, lawn tractors, snowmobiles, snow blowers, wheel barrows, garden tillers and other equipment. Maximum load capacity of 1500 lbs..
  • 【DURABLE ALUMINIUM CONSTRUCTION】 Heavy duty, fully-welded aluminum construction. Full width top plate distributes weight evenly across tailgate.Plastic covered buttons overlap the tailgate for smooth entry. Includes safety straps to hold the ramp in place..
  • 【TRI-FOLD SNOWMOBILE RAMP】 Features polyurethane ski guides for low-resistance loading and a cross-rung center section for optimal track grip. Folds horizontally for storage beside the snowmobile in the pickup truck bed..
  • 【TIPS】 Always ensure loading ramps are securely fastened before loading to avoid slipping. Where possible, it is best to remove tailgates (or check their capacity) and winch your load up the ramp or walk it from the side. Always use caution when handling folding ramps near pinch points..
Check Stock