Categories

Best Aluminum Floor Jacks

BISupply Basement Floor Jacks – 150in Adjustable House Jacks for Leveling, Basement Jack Post Floor Joist Jacks

  • DURABLE FOUNDATION JACK POSTS: Old houses and natural disasters often lead to cracked floor joists, rotting support beams, and sagging porches or decks.
  • Pick up the slack temporarily fortifying your homes structure with the BISupply Adjustable Jack Posts Basement Floor Joist Support Jack.
  • These house leveling jacks are easy to install and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (4) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 54 inches to 150 inches (137.2 to 381 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
Check Stock

Performance Tool W41044 Transmission Jack Adapter for Cars Trucks and other Vehicles

  • Transmission adapter for the removal and installation of passenger car and light duty truck transmissions.Fit Type: Universal Fit.
  • EASY ADAPTIBILITY: Vehicle lifter attachment converts floor jacks into transmission jacks.
  • Ideal for VW Beetle engine removal with rear engine placement.
  • COMPATIBILITY: Fits all floor jacks with 1-5/32” removable saddle shaft.
  • CONVENIENT POSITIONING: Adapter head tilts 30° forward and 30° backward & includes safety chain.
Check Stock

OEMTOOLS 24835 Hydraulic Floor Jack, 2.5 Ton Low Profile Automotive Jack, Quick Vehicle Lift Up to 14 Inches, Portable Hydraulic Lift, Fits Under Nearly Any Vehicle

  • HYDRAULIC CAR LIFT: The hydraulic jack is designed to lift 2.5 ton vehicles with minimal effort when performing services or maintenance work.
  • Hydraulic jack lift is built for performance and ease of use.
  • Valuable shop floor jack or garage floor jack.
  • LOW PROFILE FLOOR JACK: Our low profile car jack makes working with low-clearance vehicles much easier, getting under vehicles that standard hydraulic car jacks cannot fit.
  • These low profile floor jacks have a maximum lifting height of 14 inches.
  • SAFE TO USE: These floor jacks for cars, trucks, SUVs, and many other vehicles feature an overload system that prevents use beyond the rated capacity of 2.5 tons.
  • 2.5 ton floor jack can safely fit under and lift nearly any vehicle within its capacity.
  • PORTABLE CAR JACK: This car lifter jack comes with floor jack casters for convenient portability.
  • Heavy duty floor jack features (2) 360 degree rear swivel casters for easy maneuvering.
  • Easily transport this portable car lift around your garage.
  • PRODUCT SPECIFICATIONS: (1) Vehicle Hydraulic Jack.
  • (2) 360 Degree Rear Swivel Casters and (2) Large Front Casters.
Check Stock

Jack Boss 3 ton Hydraulic Aluminum car Floor Jack,6600 lbs Capacity,Low Profile Lightweight Quick Lift Trolley Jack with Dual Piston

  • [Capacity]Aluminum and steel floor jack can lift up to 3 tons 6600 lbs with a lifting range height of 3-15/16" min to 18-5/16" max.Dimensions:28.3" L x 13.7"W x 7.8"H.Floor jack is used for most Sedans,SUV,MPV,travel trailer,station wagon,mini bus.Package contains rubber saddle and two piece handle.
  • [Low Profile]The high performance floor jack with low profile design of 3-15/16" min.lifting height allow you to get underneath a low vehicle,suitable for low ground clearance vehicle.
  • [Quick lifting]Heavy duty jack with dual piston enable you to easily pump the jack to the desired height.Large rubber saddle also help protect your vehicle.
  • [Durable Material and Easy Operation]Floor jack constructed of aluminum billet and welded steel frame assures high strength and duablility. Steel casters and swivel front casters for easy maneuverability, sturdy handle for convinient carrying.
  • [Safety and After-sales]Our floor jacks are professionally tested to fully ensure the safety of each user and can be used at ease.Meets ANSI/ASME PASE safety standards.Includes a limited 1 year manufacturer warranty.If you have any questions, please feel free to contact us,we will be the first time to solve for you.
Check Stock

RVMATE Stack Jack 4 Pack, for RV, Camper and Trailer Stabilization, Aluminum RV stabilizer, Adjustable from 11 inch to 17 inch

  • Great for supporting a light RV, trailer and camper, offer additional stabilization. Do not use these jacks to lift your RV!.
  • Stack jack can be extended from 11" to 17". We recommend max height of 15" for best performance, prevent jacks being unstable..
  • Just rotate the T-shape rod and extend jacks, easy to set up. You could also place wood and plastic blocks under the jacks to make it more stable..
  • Made of high quality aluminum，water-proof and built to last..
  • With free reusable bag, you could store these jacks easily..
Check Stock

Floor Jack Casters for 3 Ton Floor Jack, Cast Iron Caster Wheels, Quality Replacement Parts Fit for ATD, Cornwell, Mac Tools, Matco, Mountain, Napa, Sunex & More, Pack of 2 (12mm Stem)

  • Universal Compatibility - Fit for almost all floor jacks with hole above 12mm! Eg. ATD, Cornwell, Mac Tools, Matco, Mountain, Napa, Sunex.
  • Loading Capacity - Up to 3 Tons for 1 pair.
  • Fit for floor jacks with hole in diam. ≥ 12mm.
  • All our products are backed by our 100% manufacturer's warranty of 6 months. Pls feel free to return it for a refund for any quality issues.
Check Stock

Qualcraft 2420 Two-Rung Short Body Ladder Jack, Silver

  • Many uses, such as, painting siding, window repair, general repair. Takes two to use..
  • For a super quick set-up and tear down, use Qual-Craft aluminum ladder jacks..
  • These tough riveted and welded ladder jacks will work on the inside or outside ladder face..
  • They should be fully decked using an 18″ wide platform that comply with OSHA requirements.
  • Qual-Craft ladder jacks are adjustable to fit round or “D” rung ladders..
Check Stock

Brake Pad Set, for Emergency Brake Rear Kits, 4 Pads, Compatible with Dune Buggy

  • Allows for a safe and convenient jacking point.
  • Allows for other style jacks to be used including rolling floor jacks.
  • Compatible with Volkswagen Type-1 Beetle 1950-1979..
Check Stock

InstallerParts Keystone Jack Punch Down Stand

  • Punch Down Tool Stand Provides A Solid Base For Terminating Rj45 Keystone Jacks With An Impact Tool.
  • Safer Termination With A Sharp 110 Punch Down Tool.
  • Secure Surface For Terminating With A 110, Krone Or 66 Tool.
  • Quality Keystone Jack Tool Prevents The Stand From Chipping Or Cracking When Dropped On The Floor.
  • Convenient: No More Holding The Jacks With Your Hands When Punching Down Strands From Cat5 Or Cat6 Ethernet Cables.
Check Stock

Jack Boss Hydraulic Floor Jack 1.5 Ton 3,300Lbs Car Lift Portable Trolley Jack 360 Degree for Cars Automotive Sedans

  • [Capacity]Floor jack can lift up to 1.5 tons 3300 lbs with a lifting range height of 5.31"min to 13.2"max.Dimensions:18.3" x 7.7" x 5.3".Floor jack is used for most Sedans,suv,automotive.
  • [Durable Material and Portable] Heavy Duty floor jack with sturdy adopt a thick drop forged alloyed welded steel construction.Compact and nice car lifts are portable in the vehicle truck so as to get ready for emergencies.
  • [360 degree Flexible Swivel Casters &Rotating Saddle]Car jack is equipped with steel front caster and all the rear wheel,flexible and easy to move.Single piston quick lift pump let the hydraulic trolley jack raise desired height more smoothly and quickly.
  • [Protection Valve]The hydraulic system of service jack works real well for high lift with not too much force.Built-in internal safety valve and vent plug turn on automatic protection when press is overload to keep jacks from being damaged.
  • [Safety and After-sales]Our floor jacks are professionally tested to fully ensure the safety of each user and can be used at ease.Meets ANSI/ASME PASE safety standards.Includes a limited 1 year manufacturer warranty.If you have any questions, please feel free to contact us,we will be the first time to solve for you.
Check Stock

YOMILINK Aluminum RV Stabilizer Jacks 4 Pack with Additional Screw Nuts, Screw Jack Stands, Stabilize and Level RV Trailer Camper, Adjustable Height 11.5 to 17.5 Inch, Single Jack Withstand 6000 Lbs

  • 【Applicability】The Aluminum RV stabilizer jacks are adjustable from 11.5 inches to 17.5 inches. Each jack supports up to 6000 lbs. Used to level your RV trailer or camper..
  • 【High Quality】A high-quality aluminum jack has maximum strength and anti-corrosion life for easily and safely using..
  • 【Usage Details】Place the jack in the corner of the trailer frame to achieve the effect of no swing. We suggest that it is better to use wood or concrete blocks under the jack..
  • 【Attention】Please note that these jacks are only used for stabilization purposes, DO NOT USE TO RAISE..
  • 【Packing】The package includes 4 RV leveling jacks, with a lovely storage bag..
Check Stock

Homeon Wheels Plastic Stabilizer Stack Jacks for RV, Travel Trailers, Pop-Up Camper, Cars or Boats,Can Support Up to 6610 lbs, Extends to 17 inches (4 Packs)

  • ⚓ Durable, heavy duty pp material for strength..
  • ⚓ Adjustable Height - RV stabilizer stack jacks may meet most people needs for Cars, Trailer, and RVs that can minimum to 11.42 inch,maximum to 15.75 inch. Capacity: camper leveling jacks can Support Up to 6610 lbs when all 4 PACKS in place ( ONE SINGLE MAX HOLDING 1651 LB, NOT EXCEED PLEASE ).
  • ⚓ EASIER FOR STORAGE - The stackable design of Homeon Wheels trailer stabilizer jacks take up minimal storage space for RVs, pop-up camper or smaller trailer. It's convenient to help steady your travel trailer in the parking spot. Handy 4 pack allows for added stability and support.
  • ⚓ Suitable for small sized vehicles(Car/Truck/Vehicle/RV/Trailer), pop-ups, trailers, campers motorhomes and RVs. Package comes with a set of (4) stack jacks and 1 T Level Aid as free of charge.
  • ⚓ NOTES: Four Packed stack jacks need to be scattered around the wheels to stabilize the RV better. However, if you are not entirely satisfaction with your purchase for any reason, refund within 30 days for you. We also have Aluminum Stabilizer Stack Jacks, support up to 7936 lbs when heavier trailer in use. Please choose according to your needs, safe and secure..
Check Stock

Jack Boss Hydraulic Floor Jack 1.5 Ton 3,300Lbs Heavy Duty Car Lift Portable Trolley Jack 360 Degree for Cars Automotive Sedans …

  • [Durable Material and Portable] Heavy Duty floor jack with sturdy adopt a thick drop forged alloyed welded steel construction.Compact and nice car lifts are portable in the vehicle truck so as to get ready for emergencies.
  • [Capacity]Floor jack can lift up to 1.5 tons 3300 lbs with a lifting range height of 5.31"min to 13.2"max.Dimensions:18.3" x 7.7" x 5.3".Floor jack is used for most Sedans,suv,automotive.
  • [360 degree Flexible Swivel Casters &Rotating Saddle]Car jack is equipped with steel front caster and all the rear wheel,flexible and easy to move.Single piston quick lift pump let the hydraulic trolley jack raise desired height more smoothly and quickly.
  • [Protection Valve]The hydraulic system of service jack works real well for high lift with not too much force.Built-in internal safety valve and vent plug turn on automatic protection when press is overload to keep jacks from being damaged.
  • [Eassy Carrying]Built-in carrying handle, allowing for the jack to be lifted quickly.
  • Includes a portable carrying case for easy storage when not in use..
  • [Safety and After-sales]Our floor jacks are professionally tested to fully ensure the safety of each user and can be used at ease.Meets ANSI/ASME PASE safety standards.Includes a limited 1 year manufacturer w....
Check Stock