Categories

Best Aluminum Gas Cylinder

Gas Lift Hydraulic/Pneumatic Piston for Office Chair Gas Lift Cylinder Replacement Parts,Universal Size Fits Most Executive Chairs,Includes Removal Tool,Gloves,Gas Cylinder(Black)

  • 【HIGH QUALITY】Durable,and the best quality gas lift cylinder, withstand higher weight and pressure, high safety and explosion-proof. The gas lift cylinder has passed SGS official test and BIFMA certification, and is made of high-quality thickened outer steel to ensure compliance with quality standards..
  • 【WITH COMPLETE REMOVEL TOOLS】Package come with one gas lift cylinder, removal tools --2 shafts(28mm/1.1" dia.), 2 bolts, 1 L wrench and a pair of gloves. You can installed easily without additional screws required, fix your sinking office chair by this standard size replacement chair piston instead of purchasing a new chair..
  • 【UNIVERSAL SIZE THAT FITS MOST CHAIRS】This chair cylinder replacement will fit all office chair bases standard centre hole. Ideal to replace gas lift cylinder on 99% standard office chairs, task chairs, executive chairs, salon chairs and rolling stools on the market. It has a better load-bearing capacity. This office chair piston maximum weight it supports is 1000Lbs, which can support much heavier than ordinary gas cylinder for office chair..
  • 【SAVE MONEY】Spending 5 minutes will bring a new life to your old office chair. Fix your sinking office chair by replacing the cylinder instead of spending hundred bucks for a b....
Check Stock

20\ Chrome Foot Rest Ring for Drafting Stool or Office Chair - S4165-3

  • 2" (50mm) center hub hole width - Fits most standard 2" wide gas lift cylinders.
  • Tighten triangular hand wheel to tighten & adjust height on gas lift cylinder.
Check Stock

20 lb CO2 Tank New Aluminum CGA320 with SIPHON TUBE by Beverage Elements

  • 20 Lb. Co2 Aluminum Cylinder With CGA 320 Valve, Carry Handle, And Dip Tube.
  • (We also carry a complete line of compressed gas cylinders valves and parts).
  • 8.0 inch diameter, 28.2 inch length, 1.125″ UNF inlet thread..
  • Cylinder with valve, Shipped Empty,Do Not tilt it or lay it on its side..
Check Stock

Sydien 20mm Bore 250mm Stroke Pneumatic Air Cylinder Single Rod Double Action with Y Connector and 4Pcs Pneumatic Quick Fitting

  • Package Content: 1 Pcs x Mini Pneumatic Cylinder with 1 Pcs x Y Connector & 4 Pcs x Pneumatic Quick Fitting..
  • Made of aluminum alloy and metal, thickened cylinder body, high quality sealing rod, imported grease..
  • Two screw hole connections to get the air in and out, and a rod connected to the plunger that goes in and out..
  • Cylinder is a mechanical devices which utilize the power of compressed gas to produce a force in a reciprocating linear motion..
Check Stock

HOSALI Office Chair Cylinder Replacement,Heavy-Duty Gas Lift Cylinder Fits Most Chairs,Highest End Class 4 Hydraulic Pneumatic Piston, Universal Size

  • UNIVERSAL SIZE THAT FITS MOST CHAIRS: This chair cylinder replacement will fit all office chair bases with 50mm(2 inches) standard centre hole. Ideal to replace gas lift cylinder on 99% standard office chairs, task chairs, executive chairs, salon chairs and rolling stools on the market. SAVE MONEY - to fix your sinking office chair by replacing the cylinder instead of spending hundred bucks for a brand new computer chair. ( Please measure dimensions before purchasing ).
  • HEAVY DUTY CLASS 4 PISTON - ANTI-EXPLOSION CYLINDER: Our office chair piston passed the top-level test of BIFMA and TUV certification by lifting up and down 120,000 times without fail, they built with high-quality solid steel that can support maximum weight up to 1000 lbs. The safety decompression structure design will be more secure than other gas lift cylinder you ever use..
  • 5.5’’ PISTON STROKE FOR ADJUSTING CHAIR HEIGHT: This chair piston extends from 285mm to 425mm ( 11.22 - 16.7"), minimum length: 11.22 inches.
  • maximum length when fully extended: 16.7 inches, travel from the highest to the lowest point, replace your office chair gas cylinder and stop worrying about disturbing anyone, 360 degree rotation to all directions, freely lift and rotate your office chair smoot....
Check Stock

Office Chair Gas Lift Cylinder-Office Chair Replacement Parts, Heavy-Duty Gas Lift Cylinder Fits Most Chairs,Highest End Class 4 Hydraulic Pneumatic Piston,Universal Size

  • STANDARD SIZE OFFICE CHAIR CYLINDERS REPLACeMENT: This chair cylinder replacement will fit all office chair bases with 50mm(2 inches) standard centre hole. Ideal to replace hydraulic piston on 99% standard office chairs, task chairs, executive chairs, salon chairs and rolling stools on the market. SAVE MONEY - to fix your sinking office chair by replacing the chair gas cylinder instead of spending hundred bucks for a brand new computer chair. ( Please measure dimensions before purchasing ).
  • HEAVY DUTY CLASS 4 PISTON - STRONGEST ON THE MARKET: Our gas lift cylinder passed the top-level test of BIFMA and TUV certification, the highest End Class 4 chair piston on market, which are known as the most durable, longest lasting, and highest quality gas lift cylinders, they can lift up and down 120,000 times without fail and can be support up to 1000lbs..
  • 4.7’’ PISTON STROKE FOR ADJUSTING CHAIR HEIGHT: This chair piston extends from 264mm to 385mm ( 10.39 - 15.15"), minimum length: 10.39 inches.
  • maximum length when fully extended: 15.15 inches, travel from the highest to the lowest point, replace your office chair gas cylinder and stop worrying about disturbing anyone, 360 degree rotation to all directions, freely lift and rotate your office chair....
Check Stock

SHINA SK-66 CNC Automatic Tool Touch Sensor Waterproof and Oilproof Normally Closed with Blowing Setting Gauge Z-Axis Presetter Locator with Stroke 5mm for Mach3 etc

  • 【Easy to Connect】Integrated safety pressure valve with 3000psi pressure gauge, easy to connect..
  • 【Compatibility with Any Cylinder】The adjustable valve pin ensures compatibility with any cylinder valve changes..
  • 【Easy to Install and Use】8mm male head with filter screen, easy to use, can fill carbon dioxide into soda bottle..
  • 【No Gas Leakage】With gasket and sealing rubber rings, good sealing performance, no gas leakage..
  • 【High Quality Material】CO2 connection valve adopts aluminum alloy, which is long-lasting and corrosion‑resistant..
Check Stock

DAJAVE 2 Pack 5.5 Inch Office Chair Cylinder Replacement, Office Chair Gas Lift Cylinder, Hydraulic Pneumatic Shock Piston Heavy Duty(1000lbs) Universal Size Fits Most Executive Chairs

  • [2Pcs Gas Lift Cylinders] You will get 2 office chair cylinder replacement to fix your sinking office chair by replacing the cylinder instead of spending hundred bucks for a new computer chair.
  • This hydraulic piston is suitable for almost all office chairs (salon chairs, work chairs, executive chairs, rolling stools)..
  • [1000lbs Office Chair Cylinder] The office chair piston maximum weight it supports is 1000Lbs, which is much heavier than an ordinary gas cylinder for office chair..
  • [11.8" to 17.4" Long Adjustable Gas Lift Cylinder] Minimum length: 11.8 inches.
  • maximum length when fully extended: 17.4 inches.
  • adjustable range: 5.5 inches, Load capacity: 1000lbs.
  • Office Chair Cylinder Replacement: Full 360 degree rotation, smooth and noiseless movements to all directions. You can use this chair cylinder replacement for your office chair, gaming chair, desk chair and swivel chair etc..
  • Easy To install: This office chair cylinder is relatively simple to install,and can be installed easily with no additional screws required..
Check Stock

15810-RKB-J01 Vtec Solenoid Spool Valve with Gasket for 2005-2007 Hond-a Pilot Accord Odyssey 2.4L 3.0L 3.5L 15810RKBJ01

  • Reference OEM Number: 15810-RKB-J01. Please check the part number on your old part housing before purchase. Only part number is the unique ID..
  • Application Vehicle: 2008 Hond-a Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2007 Hond-a Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2007 Hond-a Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2007 Hond-a Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2007 Hond-a Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2006 Hond-a Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • Application Vehicle: 2006 Hond-a Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2006 Hond-a Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2006 Hond-a Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2005 Hond-a Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2005 Hond-a Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2005 Hond-a Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • VTEC (which stands for Variable Valve Timing and Lift Electronic Control) is an electronic and mechanical system in some Hond-a engines that allows the engine to effectively have multiple camshafts. As the engine moves into different rpm ranges, the engine's computer can activate alternate lobes on the camshaft and c....
Check Stock

Searon Digital Tach Hour Meter Tachometer RPM Counter for Snowmobile Skis Motor Bike Go Kart Lawn Mower

  • Inductive Tach/Hour Meter -- This digital Tach Hour Meter Tachometer will keep track of engine RPMs and running time for RC Toys, PWC, ATV, Motorcycles, Marine Engines, Chain Saws, Tractors, Lawnmowers and Gas Powered Engines..
  • Read RPM -- Read RPM when engine is started. When engine is off, display total run time of engine and remains visible.
  • Accumulate Total Hours -- Accumulate Non-resettable total run time of operation, Total time reads up to 999,99 Hours.
  • Works With -- 4 Stroke 1 Cylinder / 4 Stroke 2 Cylinder / 4 Stroke 4 Cylinder / 4 Stroke 6 Cylinder / 4 Stroke 8 Cylinder / 4 Stroke 12 Cylinder / 4 Stroke 16 Cylinder / 2 Stroke 1 Cylinder / 2 Stroke 2 Cylinder / 2 Stroke 3 Cylinder / 2 Stroke 4 Cylinder/ 2 Stroke 6 Cylinder Gas Powered Engines.
  • 2-Year Warranty -- Searon warrants that for a period of 2 YEARS from time of purchase. within 2 years, any issue with this Generator hour meter Tachometer Inductive, it will be full refund without return, as long as you contact us timely..
Check Stock

Sydien 16mm Bore 300mm Stroke Pneumatic Air Cylinder Single Rod Double Action with Y Connector and 2Pcs Pneumatic Quick Fitting (MAL16x300)

  • Single Rod double action. For more parameters, please see the product detailed pages..
  • ✅Thickened cylinder body, high quality sealing rod, imported grease. The body of the cylinder is made of high-quality aluminum alloy with high strength, which is non-deformed, resistant to impact and abrasion..
  • ✅Two screw hole connections to get the air in and out, and a rod connected to the plunger that goes in and out. High quality dust ring to protect bearing. Oil-bearing bearing life is longer, better piston rod, tightness, suitable for long-term use..
  • ✅Cylinder is a mechanical devices which utilize the power of compressed gas to produce a force in a reciprocating linear motion. A unique sealing structure is adopted, the connection between two ends and the cylinder adopts a riveting process. Before shipping the goods to you, we will check to ensure that the cylinder seal is not leaking..
  • ✅Package Content: 1Pcs x MAL16 x 300 Mini Pneumatic Cylinder & 1Pcs x Y Connector & 2Pcs x Quick Fitting..
Check Stock

Sydien 1Pc Air Cylinder 32mm Bore 300mm Stroke Dual Acting Single Piston with Y Connector and 4Pcs Pneumatic Quick Fitting (MAL32X300)

  • Single Rod double action. For more parameters, please see the product detailed pages..
  • ✅Thickened cylinder body, high quality sealing rod, imported grease. The body of the cylinder is made of high-quality aluminum alloy with high strength, which is non-deformed, resistant to impact and abrasion..
  • ✅Two screw hole connections to get the air in and out, and a rod connected to the plunger that goes in and out. High quality dust ring to protect bearing. Oil-bearing bearing life is longer, better piston rod, tightness, suitable for long-term use..
  • ✅Cylinder is a mechanical devices which utilize the power of compressed gas to produce a force in a reciprocating linear motion. A unique sealing structure is adopted, the connection between two ends and the cylinder adopts a riveting process. Before shipping the goods to you, we will check to ensure that the cylinder seal is not leaking..
  • ✅Package Content: 1Pc MAL32 x 300 Mini Pneumatic Cylinder & 1Pcs x Y Connector & 4Pcs x Quick Fitting..
Check Stock

Office Owl Office Chair Cylinder Replacement Super Bundle (Includes Removal Tool, Gloves an Instructions) Universal Size Heavy Duty Gas Cylinder for Office Chairs. Pneumatic Piston/Hydraulic Piston

  • ✅WHAT’S INSIDE YOUR OFFICE CHAIR CYLINDER SUPER BUNDLE? ! We included literally EVERYTHING you need to replace your office chair gas cylinder easily, quickly and painlessly! Featuring: Printed STEP BY STEP INSTRUCTIONS, premium GLOVES for gripping the cylinder and keeping your hands grease free, and a REMOVAL TOOL for effortless removal of the old cylinder. We included everything you need to revive your ageing office chair!.
  • ✅BREATHE NEW LIFE INTO YOUR OLD CHAIR : If your office chair starts sinking, SAVE MONEY by purchasing our office chair cylinder instead of spending money on a brand new chair! This purchase makes total sense, and comes with everything you need for a painless replacement! Backed by our money back guarantee, there is no reason NOT to make this purchase!.
  • ✅UNIVERSAL SIZE GAS LIFT: Our office chair cylinder replacement will fit just about any office chair including popular brands such as Herman Miller, Hon and Amazon Basics! If for some odd reason it doesn’t fit your specific office chair, return it for a no questions asked refund and we will even pay for the return shipping. You have nothing to lose!.
  • ✅SUPER HEAVY DUTY CLASS 4 CYLINDER! Our pneumatic piston replacement cylinder is class 4 – the highest qu....
Check Stock