Categories

Best Aluminum Heater Block For 3d Printer Nozzle

Ewigkeit MK8 Hotend Ender 3 and Pro Assembled Extruder with Aluminum Heating Block 0.4mm Nozzle(24V 40W)

  • Ender 3 hot end with 100% original and high quality accessories for Creality 3D printer.
  • Ender3 pro Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm.
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heater cartridge is 24V 40W.
  • Tip of MK8 0.4mm nozzle, aluminum heating block, throat pipe (built-in Teflon) for 1.75mm filament.
Check Stock

YuenPau MK10 Hotend Kit for 3D Printer M7 Brass Nozzle and Throat with PTFE Tube and Aluminum Heater Block Fit with M3 and M4 Thermistor

  • Compatibility: Fit with MK10 hotend aluminum cooling block, such as FlashForge Creator Pro \ Creator X \ Dreamer \ finder \ inventor, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S \ Duplicator 4X \ Duplicator i3, Monoprice maker select plus, Qidi tech, Cocoon Create, etc..
  • Quantity and specification: 1 piece MK10 hotend kit, it include these parts: 0.4mm nozzle with M7 thread 1 piece, throat with 1.75mm PTFE tube 1 piece, aluminum heater block 1 piece..
  • Brass material advantage: The heat conductivity of brass is is several times that of stainless steel and hardened steel, It is the most suitable material for extruder nozzle to ensure accurate print temperature..
  • Material: Nozzle is brass. Throat is stainless steel. Heater block is aluminium alloy..
  • Improved Version: An M3 thread hole has been added on the aluminum block to making it suitable for both M3 and M4 thermistor.
Check Stock

Brand-New MK10 Hotend Kit for 3D Printer M7 Brass Nozzle and Throat with PTFE Tube and Aluminum Heater Block Fit with M3 and M4 Thermistor

  • 100% Brand New and All parts are tested and quality controlled prior to shipment..
  • Compatible with: MK10 hotend M7 thread aluminum heater block, such as FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, FlashForge Finder, FlashForge Inventor, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, Monoprice maker select plus, Qidi tech, Cocoon Create, etc..
  • Brass material advantage: The heat conductivity of brass is 7 times as high as that of stainless steel. MK10 hotend structure only allows filament to have little contact with the nozzle. The material of the nozzle must be brass to ensure filament’s temperature is the same as the thermistor, so it make the melt plastic more smooth. But the heat conductivity of stainless steel is so poor, it is unscientific and irrational used on MK10 nozzle..
  • Material: Nozzle is brass. Throat is stainless steel. Heater block is aluminium alloy..
  • Package includes: 1 piece 0.4mm nozzle with M7 thread,1 piece throat with 1.75mm PTFE tube , 1 piece aluminum heater block as shown in the pictures..
Check Stock

TRONXY Original Extruder Assembled MK8 Hotend Kit for 3D Printer with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle，Bowden Extruder kit

  • 100% TRONXY Orginal MK8 Full Set Hotend Kit.
  • Suitable For TRONXY XY-3 Seriers 3D Printer.
  • Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon).
  • MK8 Extruder Hot End Kit With thermistor 100K and Heater 24V 50W.
  • Thermistor and heater cable length: 1.2 m ,Feed tube:50cm.
Check Stock

Wangdd22 15pc/Set 1.75mm Teflon Throat Tube+0.4mm Extruder Nozzle Print Heads+Heater Blocks Hotend for MK8 Makerbot Anet A8 3D Printer

  • Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm....
  • 0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D Printer.
  • Quanlity:15pcs/lot (5 piece 1.75mm Nozzle Inputting Tube,5 piece 3D Printer 0.4mm Extruder Brass Nozzle Print Head,5 piece Heater Blocks Hotend).
Check Stock

Onyehn 22pcs/Lots A8&A2 3D Printer Part Each 5PCS 0.4mm Extruder Nozzle Print Head+1.75mm Teflon Throat Tube+Heater Blocks Hotend for MK8 Makerbot Reprap

  • Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm....
  • 0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D Printer.
  • Quantity:22pcs/lot (5x 3D Printer Nozzle Throat Tube 5x Nozzle Print Heads 5x Heater Blocks Hotend 5x M6 nuts 2x Hex Key Wrenches (for MK8 Makerbot....
Check Stock

ChowThink High Temperature Fast Heating E3D V6 Hot End Full Kit 3D Printer Extruder Parts Accessories Parts

  • Well-made: Copper Chrome-plated Heater Block, good thermal conductivity, high temperature resistance，Hollow design, fast heat dissipation.
  • Compatible with all 1.75mm E3D V6 Makerbot 3D Printer，Easy to install, With installation tool ..
  • Easy to install Upgrade the all metal hotend to effectively solve the problem of leakage and blockage during the printing process..
  • Kit Includes: Aluminum Cooling Block, Grade 5 Titanium Heat Break, Copper chrome-plated Heater Block, Copper chrome-plated Wear Resistant MK8 0.4mm....
  • Made by ChowThink，Any Questions contact us freely..
Check Stock

MK8 Extruder Hotend 3D Printer Assembled kit for CR-10/CR-10S/CR-S with Aluminum Heating Block 1.75mm, 0.4mm Nozzle

  • 100% original and high quality 3D Printer accessories for Creality CR10/ CR10S/ CR10S4/ CR10S5.
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W.Perfect replacement accessories/parts for Creality CR-10 CR-10S S4 S5 3D Printer.
  • This CR-10 hotend can work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
  • Tip of MK8 0.4mm nozzle, aluminum heating block, throat pipe (built-in Teflon) for 1.75mm filament.
  • With nine(9) cooling fins on the heatsink.No blockage,no leakage,fast heat dissipation, better printing effect..
Check Stock

Kweiny MK10 Heater Block 2PCS for 3D Printer Hotend Improved Version Fit with M3 and M4 Thermistor

  • Compatibility: Fit with MK10 hotend M7 thread nozzle and throat, such as FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, FlashForge Finder, FlashForge Inventor, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, Monoprice maker select plus, Qidi tech, Cocoon Create, etc..
  • Improved Version: According to customer feedback, a M3 threaded hole has been added to the aluminum block, making it suitable for both M3 and M4 thermistor.
  • Quantity and specification: 2 pieces MK10 aluminum heater block, For detailed dimensions, please refer to the drawings in the upper left.
Check Stock

Sunhokey Extruder Assembled MK8 Hot End Kit for CR10 with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle(12V 40W)

  • High-quality 3D Printer accessories for Creality CR-10 CR-10S S4 S5..
  • Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle..
  • MK8 Extruder Hot End Kit, the white wire is temperature thermistor, the red wire is heating tube 12V 40W..
  • Tip of the nozzle, aluminum heating block, throat pipe ..
Check Stock

ExcelFu 5pcs 30MM Length Extruder 1.75MM Teflon Throat Tube and 5pcs 0.4MM Brass Extruder Nozzle and 5pcs Heater Blocks Hotend for MK8 Makerbot Anet A8 3D Printer (Bonus: 2pcs hex Key Wrenches)

  • 5x 3D Printer Nozzle Throat Tube + 5x Nozzle Print Heads + 5x Heater Blocks Hotend + 2x Hex Key Wrenches(for MK8 Makerbot Reprap Prusa I3 3D Printer).
  • Nozzle Throat Tube: Material - Stainless Steel.
  • 0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D printer, works with Anet A8.
Check Stock

Creality 3D Hardened Steel MK8 Nozzle with High Temperature Resistance Upgraded Tungsten All Metal Nozzle Ends for Makerbot Ender 3 / Ender 3 S1, CR-10 Series, 0.2/0.3/0.4/0.5/0.6 mm (5pcs in One Set)

  • ...brass nozzles，which makes it durable accurate and compatible with more filaments..
  • [High Temperature Resistance ] The max temp of this hardened tool steel nozzle could reach at 450c, suitable for 3D printing at high temperature, compatible material from PLA,ABS to carbon fiber, even PEEK..
  • [High Precision] these 3D printer nozzles keep stable temperature during printing let the filament out evenly, create more perfect printer item than normal metal nozzle. Also with higher print speed in same print precision.Not easy clog during printing, easy to clean. Made with centering CNC precision automatic lathe and one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs..
  • [Applicability and Compatibility] Our Creality Ender-3 S1 Nozzles suit to almost all FDM printer,could install to MK8 heating block. Our tungsten nozzles fit for 3D Printer Makerbot Creality Ender 3 series and CR-10 series 3D printer, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original..
  • [Package] Package comes with 5 pieces of black different size MK8 nozzles, the size is 0.2mm/0.3mm/0.4mm/0.5mm/0.6mm, sufficient quantity and size to facilitate your timely replace....
Check Stock

Creality 10 Packs 3D Printer Hardened Steel MK8 Nozzles, Upgraded Tungsten All Metal Extruder Nozzles 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm for Creality Ender 3 Ender 3 V2 Ender 3 pro CR-10

  • ...max temp of this hardened tool steel nozzle could reach at 450c, suitable for 3D printing at high temperature, compatible with material such as PLA, ABS to carbon fiber, even PEEK..
  • [High Precision More Than Your Imagination] - Keep stable temperature during printing, let the filament out evenly, create more perfect printer item than normal metal nozzle. Also with higher print speed in same print precision. Avoid clog during printing, easy to clean. Made with centering CNC precision automatic lathe and with one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs..
  • [Applicability & Compatibility] - Our Creality Nozzles are compatible with almost all FDM printer, also fits for MK8 heating block. Our tungsten nozzles are also designed for 3D Printer Makerbot Creality Ender 3 series and CR-10 series 3D printer, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original..
  • [Package] Package comes with 10 pieces of different size MK8 nozzles, include 8 pcs brass nozzles (0.2/0.3/0.5/0.6mm each 1pcs, 0.4mm nozzle 4 pcs)+ 2pcs black hardened steel nozzles 0.4mm. NOTE: Small accessories, please keep away from children..
Check Stock