Categories

Best Aluminum Led Heatsink

Litever 6-Pack 3.3 ft/1 Meter Deep Flush Aluminum Channels for LED Strips Recessed Embeded Mounting with Diffused PC Covers End Caps Mounting Clips Screws-LL-007-B

  • Deep recess aluminum channel of 15mm depth. The deeper the aluminum channels, the less light spots the LED strips produce. Spotless neon fluorescent lighting effect when working with 120 LEDs/meter LED strip of high brightness..
  • Aluminum LED channels for maximum 12.3mm wide LED strips, matching most 2835, 5050, 5630 flexible and hard LED strips..
  • Recess flush mounting. Perfect to be embedded in walls, furniture..
  • Aluminum heatsink of this led strip channel system is thick enough for heavy-duty LED tapes, i.e, 5630 LED tapes, 120 LEDs LED tapes..
  • Diffused PC cover. Much robust and flexible compared with easily-broken acrylic covers.They will not break during cutting or installation..
Check Stock

uxcell DC 9V 5W 50mmx7mm COB LED Strip Light Super Bright Lamp Chip Warm White

  • Luminous Surface: 29mm x 6mm/1.14" x 0.23"(L*W).
  • Note:This LED chip needs a heatsink for cooling before power on,Working temperature should be less than 60 Degrees Celsius / (140 Fahrenheit) with a Heat Sink System. Apply thermal grease evenly on the bottom of the light source and the contact surface of the heatsink when installation..
Check Stock

Blizzard T400 PRO Red - CPU Cooler with Dual 2X XtraFlo 120 Fire Red LED PWM Fan 4 Direct Contact Heatpipes Red Top Cover Intel/AMD Universal Mounting AMD AM4 Compatible!

  • Direct Contact Heatpipes & 57 Stacks of Aluminum Fins 289138mm2 air contact surface area (>16% higher than Blizzard T4 / Hyper T4) of aluminum fins....
  • "V" Shaped Array Aluminum Fins Wide "V" Shaped molding of the Aluminum Fins minimize the contact of the heatsink and the cooling fan. Which increase....
  • XtraFlo 120 "Fire Red" LED PWM Fan Wave Shaped and small hub dimension generate extra high airflow. With a wide range PWM fan control from 500 to....
  • "Top Cover" Lock the Push & Pull AirFlow To avoid dynamic losses, the "Turbo Engine Cover" & the dual XtroFlo Fan setup provides added pressure to....
  • Quick-snap Fan Bracket with Anti-vibration Rubber Pads Quickly and easily install, remove, clean or replace the fan / heatsink for simple maintenance,....
Check Stock

Nxtop 5 PCS Aluminium Heatsink Heat Sink Module Cooler Fin 100x25x10mm Silver Tone

  • 100x25x10mm silver tone aluminum heatsink heat sink cooling fin, ideal to be used for cooling LED, Power IC, Power Amplifier,and Transistors etc..
  • Size: 100 x 25 x 10mm/3.94 x 0.98 x 0.39inch(L x W x H)..
  • Pin Board Thickness: 1.5mm(1.8mm for two pin boards outside)..
  • Package Content: 5 x Silver Tone Aluminium Heatsink Cooling Fin..
Check Stock

Marsauto H4 Led Headlight Bulbs Conversion Kit

  • New csp led chips and high efficient silent fan, 6000k white color.
  • Plug and play, all in one conversion kit, easily installed in 20 mins.
  • Aluminum alloy shell, efficient silent fan.
  • Aluminum alloy, unique heatsink high fficiency silent fan complete the whole cooling system.
  • 360 degrees beam angle, no dark spot or shaded area, the same light theory as the stock lamp.
Check Stock

SEALIGHT H11/H8/H9 LED Headlight Bulb, 6000K Mini Size Low Beam/Fog Lights, 50W 6000Lumens White Lighting Replacement with Fan

  • These 6000K, IP67, 50-watt, 6000lumens h11 led headlight bulbs last over 30,000 hours, with aluminum housing and turbo cool fan to prevent overheating, all-in-one compact bulbs pair.
  • Mini size, the design of S2R led bulb is almost same ratio to stock bulb, fits for 99% of vehicles, no need to modify or change dust cover, truly plug-n-play installation takes just minutes.
  • Fan-based bulb runs coolest, fan built inside, the fan blows the air on the heatsink to speed up the cooling process, greatly improve cooling without increasing the size of the heatsink.
  • Mimic the original halogen bulb filament, didoes are vertically aligned, this should create the right beam pattern and bring enough light output while do not blind the oncoming traffic.
  • CSP chips, true 6000K cool white color temperature makes it easier to match for most conditions, let it shine with a makeover of our considerate h11 led headlight bulbs, for 12 volts only.
Check Stock

RC Motor Heatsink with 21000 RPM Cooling Fan Aluminum Motor Radiator with RGB Brushless Engine Motor Heat Sink for TRAXXAS 1/8 1/10 Car Truck Buggy SCX10 Tamiya ARRMA Axial RC Car 4274 4268 Motor

  • ❄【Strong and Durable】: This Heatsink are made of high-quality aluminum alloy and plastic material, wear resistant, durable and long service....
  • ❄【RGB Led Light】: Especially design heatsink and Cooling fan can power supply over receiver, convenience and easy to use. Moreover,that heat....
  • ❄【Compatible Models】: 42mm Diameter RC Motor Heatsink for 1/8 scale, 1/10scale RC Car and fit 3010/4010 Size Brushless / Brushed Electric Motor....
  • ❄【Up to 8.5V Cooling Fan】: This Motor Heat-sink Radiator with 5---8.4v power Cooling fan which keep your motor cool and make your motor run more....
  • ❄【Easy to Install】: DKKY RC Motor Heat sink with Small size and lightweight that very convenient for you to install and remove..
Check Stock

Dedicated Aluminum Heatsink for Raspberry Pi Compute Module 4 (CM4), Notched for Antenna

  • Dedicated Aluminum Heatsink for Raspberry Pi Compute Module 4：Dedicated aluminum heatsink, corrosion / oxidation resisting, better heat dissipation.
  • For CM4 & based board：matching with the CM4 on size and mounting holes, fast heat dissipation.
  • Notched for antenna section：no hindrance to the antenna.
  • Using with base board: for Official Compute Module 4 IO Board or Waveshare Compute Module 4 PoE Board.
  • Note: Only HEATSINK,not include base board.
Check Stock

Vilros Raspberry Pi 4 Heavy Duty Aluminum Alloy Pi Cooling Case (Black)

  • Aluminum Alloy Case Designed For the Raspberry Pi 4 Model B-Case Itself Acts as Heatsink to Draw the Heat Away from the Pi.
  • Aluminum Case Comes in contact with the CPU and other chips on the Pi Board to act as a Heatsink and pull heat away from the Boar.
  • Includes Thermal Heatsink Compound for maximum heat conductivity and spreader for easy application.
  • Includes Screws,Screwdriver and Rubber Non-Slip Pads.
  • Fully Backed by the Vilros 1 Year Warranty.
Check Stock

H1 LED Headlight Bulbs, CAR ROVER 50W 10000Lumens Extremely Bright 6000K CSP Chips Conversion Kit

  • SUPER BRIGHT: Using the newest Korean CSP LED chips(6 SMD and double-sided), each h1 led headlight bulbs can light up to 5000 [email protected] extremely bright xenon white light with perfect low beam pattern, and 200% brighter than the stock halogen bulb, no dark spots or shadowed areas, don't dazzle oncoming traffic, no glare to other drivers..
  • ADJUSTABLE MOUNTING DESIGN: Besides the ultra-high brightness, this h1 LED headlight kit can be 360 degree adjusted and comes with removable adapter, which means that you can easily mount this car LED headlight bulbs in the reflector or projector headlight. Also, the LED aluminum adapter can be rotated seamlessly for adjustment of the beam pattern..
  • STRONG HEAT DISSIPATION: The h1 LED bulb was built-in cooling fan and made of aviation aluminum lamp body, which keep the light get a better protection and performance in heat dissipation..
  • EASY INSTALLATION: Plug and play! The heatsink part only has 20.2 mm length, fit for 95% vehicles. After installation, there's enough space for the headlight breathing. Can be installed in 15-20 minutes by yourself..
  • LONGER LIFESPAN: Last more than 30,000 hours. Works underwater! Rainproof driver, housing, and fan works even in extreme situations..
Check Stock

Philips Automotive Lighting 9145 Ultinon Essential LED Fog Lights 2 Pack

  • A one-piece design, with integrated electronics and cooling fan in the light base, facilitates easy installation..
  • Brilliant, precise white beam: Powerful bright white light provides enhanced visibility with no glare to oncoming traffic for increased safety.
  • Expect long-lasting performance: Dual heat-dissipation mechanism - aluminum heatsink and built-in fan to disperse heat more effectively and....
  • Do you see a dashboard warning or flickering effect? Some vehicle CANbus systems have specific challenges with LED-based retrofit bulbs. A Philips LED....
Check Stock

Philips Automotive Lighting 9006 Ultinon Essential LED Fog Lights 2 Pack

  • A one-piece design, with integrated electronics and cooling fan in the light base, facilitates easy installation..
  • Brilliant, precise white beam: Powerful bright white light provides enhanced visibility with no glare to oncoming traffic for increased safety.
  • Expect long-lasting performance: Dual heat-dissipation mechanism - aluminum heatsink and built-in fan to disperse heat more effectively and....
  • Do you see a dashboard warning or flickering effect? Some vehicle CANbus systems have specific challenges with LED-based retrofit bulbs. A Philips LED....
Check Stock

Geekworm Raspberry Pi 4 Case, Raspberry Pi 4 Heatsink Aluminum Alloy Passive Cooling Case (P330)

  • 【Passive Cooling Aluminum Alloy Case】Geekworm Raspberry Pi 4 Case - P330 is designed for Raspberry Pi 4 Model B computer only, support Raspberry Pi 4B 1GB/2GB/4GB/8GB version.
  • Cool your Raspberry Pi 4 without fans and noise..
  • 【Add Copper Heatsink for Better Cooling】Equipped with a CPU copper heatsink(to replace the thermal pad) to attach with CPU grease on CPU of Pi4 for better heat dissaption (Not include CPU grease).
  • 【High Quality Aluminum Material】Sturdy and durable, keep your Raspberry Pi 4 free from scratches, dust and damage..
  • 【Easy Access to Raspberry Pi 4 Ports】Easy installation. Easy access to all Raspberry Pi 4 ports, such as GPIO, Micro HDMI, TF Card, USB-C Power Supply ".
  • 【Packing List】1 x Raspberry Pi 4 Aluminum Alloy Case, 1 x Copper Heatsink, 1 x Screws Pack 【Note】NOT include raspberry pi board.
Check Stock