Categories

Best Aluminum Left Hand Die

uxcell Tap and Die and Drill Bit Set M12 x 1.75 Left Hand Thread Milling Tap and Round Die 10.2mm Cobalt High Speed Steel Twist Drill Bit

  • Compatibility: M12 x 1.75 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
  • Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
  • 10.2mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
  • Tips: Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Check Stock

Audio-Technica VM750SH Dual Moving Magnet Shibata Stylus Stereo Turntable Cartridge Black

  • Dual magnets match the left and right channels in a stereo record groove for outstanding channel separation and extended frequency response.
  • Shibata stylus provides greater surface contact with the record groove than elliptical styli, picking up ultra-high frequencies with less groove stress and distortion.
  • Paratoroidal coils improve generating efficiency.
  • Center shield plate between the left and right channels reduces crosstalk.
  • Die-cast aluminum alloy housing reduces vibration and adds a natural electrical shield.
  • Includes aluminum cantilever and mounting hardware.
Check Stock

uxcell M8x1.25mm Straight 4 Flutes Metric Bottoming Taper Hand Taps 3pcs

  • Tap Size: M12 x 0.5 metric thread, H2 thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High speed steel tool is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

uxcell Metric Machine Tap M3 Thread 0.5 Pitch H2 3 Flutes Hex Shank High Speed Steel

  • Tap Size: M2 x 0.4 metric thread, H2 thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High speed steel tool is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

Cheeky Fishing PreLoad 350 Fly Reel Combo, Black/Gunmetal

  • The PreLoad fly fishing reel takes the hassle, guesswork and expense out of rigging up by coming spooled and ready to fish out of the box..
  • All PreLoad fly reels have pre-installed backing, fly line and leader. Included: low friction and abrasion-resistant 20 lb fly line backing, weight forward (WF) tapered floating fly line designed specifically for the range of rod size associated with each PreLoad size, and a 9 foot loop-to-loop tapered leader. All in a neoprene reel case..
  • The PreLoad frame and spool are die-cast aluminum to maximize stability and durability. Key components like the reel foot, drag knob, and spool cap are CNC machined aluminum. These lightweight materials make for a well-balanced fly fishing setup..
  • The S-Power Drag incorporates stacked alternating carbon fiber discs to provide more than enough power to stop most fish with no detectable startup inertia..
  • The PreLoads large arbor size delivers a high retrieval rate for fast line pickup. Silent retrieval makes for a quiet fishing experience. Easy to convert from left- to right-hand retrieve..
Check Stock

Cheeky Fishing PreLoad 375 Fly Reel, Black/Gunmetal, 7-8 wt

  • The PreLoad fly fishing reel takes the hassle, guesswork and expense out of rigging up by coming spooled and ready to fish out of the box..
  • All PreLoad fly reels have pre-installed backing, fly line and leader. Included: low friction and abrasion-resistant 20 lb fly line backing, weight forward (WF) tapered floating fly line designed specifically for the range of rod size associated with each PreLoad size, and a 9 foot loop-to-loop tapered leader. All in a neoprene reel case..
  • The PreLoad frame and spool are die-cast aluminum to maximize stability and durability. Key components like the reel foot, drag knob, and spool cap are CNC machined aluminum. These lightweight materials make for a well-balanced fly fishing setup..
  • The S-Power Drag incorporates stacked alternating carbon fiber discs to provide more than enough power to stop most fish with no detectable startup inertia..
  • The PreLoads large arbor size delivers a high retrieval rate for fast line pickup. Silent retrieval makes for a quiet fishing experience. Easy to convert from left- to right-hand retrieve..
Check Stock

Sage Spectrum C Fly Fishing Reel, Multipurpose Fly Reel for Freshwater and Saltwater, SCS Drag System, Grey, 5/6

  • SPECTRUM C: Multi-purpose fly reels built to cover the entire range of freshwater and saltwater fly fishing applications from Brook Trout to Tarpon..
  • SCS DRAG SYSTEM: Proprietary high-grade US made carbon easily and repeatedly handles high pressure and quickly dissipates the kinetic energy of that running fish into thermal energy. Tailored configurations allow us to create specific drag systems for each model, size, and fishing application, and the entire system itself is sealed to keep out water, sand, grit, and salt..
  • ONE REVOLUTION DRAG KNOB: Numbered settings, detents, and audible clicks help you take the guesswork out of setting your preferred control level. The easy switch between decreased tension for stripping and increased pressure for fighting fish makes for more time fishing and less time setting drag..
  • LARGE ARBOR: The SPECTRUM C features a large arbor with rugged machined die-cast frame and generous concave vented spool for faster line pickup..
  • DURABLE FINISH: Powder coated for surface protection and corrosion resistance for all fishing conditions. Lightweight aluminum die-cast construction with machined finish for added strength. Easy conversion from left to right hand retrieve..
Check Stock

Sage Spectrum C Fly Fishing Reel, Multipurpose Fly Reel for Freshwater and Saltwater, SCS Drag System, Black, 5/6

  • SPECTRUM C: Multi-purpose fly reels built to cover the entire range of freshwater and saltwater fly fishing applications from Brook Trout to Tarpon..
  • SCS DRAG SYSTEM: Proprietary high-grade US made carbon easily and repeatedly handles high pressure and quickly dissipates the kinetic energy of that running fish into thermal energy. Tailored configurations allow us to create specific drag systems for each model, size, and fishing application, and the entire system itself is sealed to keep out water, sand, grit, and salt..
  • ONE REVOLUTION DRAG KNOB: Numbered settings, detents, and audible clicks help you take the guesswork out of setting your preferred control level. The easy switch between decreased tension for stripping and increased pressure for fighting fish makes for more time fishing and less time setting drag..
  • LARGE ARBOR: The SPECTRUM C features a large arbor with rugged machined die-cast frame and generous concave vented spool for faster line pickup..
  • DURABLE FINISH: Powder coated for surface protection and corrosion resistance for all fishing conditions. Lightweight aluminum die-cast construction with machined finish for added strength. Easy conversion from left to right hand retrieve..
Check Stock

uxcell Metric Machine Tap M4 x 0.7mm H2 HSS Ti-coated 3 Straight Flutes Thread Tapping DIY Tool

  • Tap Size: 3/8"-24 UNF thread, 2B thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings, suitable for wide ranges of applications..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

uxcell Thread Milling Threading Tap 9/16 -24 UNEF Left Hand Machine HSS High Speed Steel 6542 Uncoated 4 Straight Flutes 2B Tolerance Grade

  • Tap Size: 9/16"-24 UNEF thread, 2B thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings, suitable for wide ranges of applications..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

uxcell Thread Milling Threading Tap 9/16 -18 UNF Left Hand Machine HSS High Speed Steel 6542 Uncoated 4 Straight Flutes 2B Tolerance Grade

  • Tap Size: 9/16"-18 UNF thread, 2B thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings, suitable for wide ranges of applications..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

uxcell Thread Milling Threading Tap 1/2\-13 UNC, Left Hand Machine HSS (High Speed Steel) 6542 Uncoated 4 Straight Flutes 2B Tolerance Grade

  • Tap Size: 1/2"-13 UNC thread, 2B thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings, suitable for wide ranges of applications..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

uxcell Thread Milling Threading Tap 1/4\-20 UNC, Left Hand Machine HSS (High Speed Steel) 6542 Uncoated 3 Straight Flutes 2B Tolerance Grade

  • Tap Size: 1/4"-20 UNC thread, 2B thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings, suitable for wide ranges of applications..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock