Categories

Best Aluminum Machining Oil

uxcell Machine Tap 1/4-32 UNEF 2B High Speed Steel Screw Thread Threading Milling Tap Tapping Tool

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

uxcell Machine Tap 5/16-32 UNEF 2B Class High Speed Steel Screw Thread Threading Milling Taps Tapping Tool

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

Zouzmin Carbide Insert APGT1135PDFR-G2 Milling Insert for Aluminum Alloy (APGT1135PDFR-G2)

  • Machining: Copper And Aluminum Medium Finish Machining.
  • Allows Faster Machining And Leaves Better Finished on Metal Parts, Reduce the Downtime Required to Change Edges and Easily to be Replaced..
Check Stock

ISCAR QPMR 100404PDN-HQ-M IC28 Carbide Milling Inserts CNC

  • Used mainly for machining aluminum at medium cutting speeds and medium or large chip sections. The inserts usually feature very sharp cutting angles.
  • Super positive square milling inserts for machining aluminum, stainless steel, and high temperature alloys (QUAD2000).
  • ISO Range - P/M/K / ISO Range - N/S/H (N15-N30).
  • Grade or Coating Type: Uncoated / Coating Layers: Uncoated.
Check Stock

uxcell Machine Tap 10-32 UNF Thread H2 Class 3 Flutes High Speed Steel Screw Threading Tap Tapping Tool 5pcs

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

uxcell Machine Tap 1/4-20 UNC Thread 2B Class 3 Flutes High Speed Steel Screw Threading Tap Tapping Tool 2pcs

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

VMTW 8X1 CBN Grinding Wheel 180 Grit 1/4 inch side face for High Speed Steel

  • Straight diamond grinding wheel used for machining of conical, cylindrical and flat surface, cylindrical and conical apertures. Machining of cylindrical surfaces parts and surface ends at one set-up. Machining of recesses and slots of carbide stamps. Sharpening and finishing of carbide tools..
Check Stock

GT35 Turbo AN4 Oil Feed Restrictor Fitting Inlet T25 T28 GT25 GT28 T3 M12 x1.0

  • This Oil Diverter Barbell is Compatible with all GM LS-Series Engines including LS1 LM7 LR4 LQ4 LS6 L59 LQ9 LM4 L33 LS2 LH6 L92 L76 LY2 LY5 LY6 LC9 LFA LH8 LMG LS3 L98 L9H L20 L94 LZ1 L99 L96 LC8 L77..
  • Using this Aluminum Oil Passage Barbell Plug Replace Old or Worn Out to Prevent Oil Seepage in Your Oil Passage..
  • The upgraded product CNC machining has fewer tolerances and smaller gaps, which prevents dust from entering the oil and keeps the oil clean..
  • The diverter was designed with a little taper, which will make oil flow smoothly. 1/4-20 Thread end made it convenient for loading or unloading. Viton O-ring has better corrosion and aging resistance, lasts a long time..
  • Professional installation is recommended. According to our customer experience, you can use a small rubber mallet to tap to install go in, different models may have size differences, if you think the size is too large, you can lightly sand the edge of this barbell to fit, or lubricate the contact parts for better Install. It's easy to do, and you'll save a lot..
Check Stock

3mirrors Oil Filter Wrench Drain Tool Set and Engine Oil Funnel Compatible with Toyota Lexus Scion Camry Tundra Highlander Sienna 2.0-5.7L Engine with 64mm Cartridge Style Oil Filter System

  • This set contains tools needed for oil change. Heavy oil filter wrench, copper drain tool, nylon clamp and multifunctional engine oil funnel.Expensive....
  • The drainage tool is made of all copper, CNC machining, and the hose made of silicone is more durable and soft, and will not crease or harden. The....
  • The multifunctional funnel can be directly connected to the neck of the oil filter element. When the thread specification of the funnel does not....
  • The wrench is made of high-quality aluminum, which is very suitable for the 64mm cartridge type oil filter. It has a regular 14-sided shape, and the....
  • Please check the second and third pictures before purchasing them. It will guide you properly. Please confirm the model of the product wrench before....
Check Stock

sjlerst RC Spring RC Accessory, Upgrade Shock Absorber, Car Shock Absorber, Front&Rear for Axial for SCX10

  • ✿【Nice Replacement Accessories】☀Nice replacement accessories for the old or broken one..
  • ✿【Fine In Workmanship】☀Fine in workmanship and high in quality..
  • ✿【Double Spring Design】☀Double spring design for best performance..
  • ✿【CNC Machining Aluminum】☀CNC machining aluminum with anodizing, which makes it solid, durable and of exquisite appearance..
  • ✿【Widely Used】☀Suitable for Axial / SCX10 / D90 / TRX-4 RC crawler car..
Check Stock

MRELC Universal Motorcycle 7/8 22mm Handlebar Brake Master Cylinder Clutch Lever CNC Left & Right Set Compatible with Harley Honda Kawasaki Suzuki Yamaha（ Piston Diameter 12.7mm Blue

  • 【Compatible With】:Universal Motorcycle 7/8" 22mm Brake Master Cylinder Clutch Lever,uitable for most Chinese motorcycles. (Compatible with Eg Harley Honda Kawasaki Suzuki Yamaha).
  • 【Reasonable design】： Adjustable design, clear between each gear, not easy to slip. The pivot design allows the lever to fold outward to prevent bending or breaking in the event of a collision..
  • 【Material】：6061-T6 Aluminum Alloy， corrosion-resistant alloy, high hardness (up to HV90 degrees), good oxidation effect. There are no trachoma pores, and the flatness is better..
  • 【Processing technology】: Aluminum Alloy Lever Body + CNC pump.CNC machining process，stable machining quality, high machining accuracy,100% Brand New..
  • 【Package includes】: 1* Left pump + 1* Right pump +1*brake light switches).
Check Stock

Mobil Mobilcut 100 Aqueous Metal Working Fluids [5 Gal. Pail]

  • ...nimize tip welding, boosts machine finishing, prevents metal seizures & pitting, but it also provides the cleanest cuts on the market!.
  • Multi-Purpose Solution: Also known as a Cutting Fluid, our propriety formula improves the performance and Extends the Life of your drilling & cutting tools as well as power drills & machining equipment. Evo Dyne’s Cutting fluids provides the tack needed for hand drilling and thread cutting making for a safer working environment.
  • Improved Performance: Our aluminium cutting fluid for metal drilling reduces heat and damage caused by friction & also makes mechanical processing of metals easier. With the finest thread cutting oil on the market, you can ensure a high-quality finish of your work while prolonging the life of your equipment.
  • Cutting Oil Made Easy: For the best outcome, apply the Cutting Oil between the cutting tool and workpiece as needed through the duration of work. Maximize your speed and feed time with our simple to use threading oil. This metal cutting fluid is safe for all cutting operations that require a high level of tolerance, precision, fit, & finish. Reapply as needed to maintain your tools' performance at their best.
  • Customer Satisfaction: Based on the trust of our high quality, Tapping Fluid is gu....
Check Stock

RCAWD Big Bore Shock Absorber Damper for 1/10 Traxxas Slash 2WD, Hoss, Rustler 4X4 VXL,Slash 4X4, Bandit, Ford, Nitro,Stampede Upgrades, RC Shocks Front Rear Aluminum Parts #5862 Black

  • ...ng】Threaded Shock Collar - threaded shock bodies provide the perfect blend of scale realism and added spring adjustabilty.Features threaded shock collars for fine-tuning of vehicle ride height.And small oil has been pre-filled, you can add oil according to your needs..
  • 【Lightweight Aluminum& CNC Machining】: Hard-anodized colour, CNC machined PTFE-coated hardened alloy 6061-T6.
  • The lightweight aluminum alloy material is durable and improves the overall performance of the Front and Rear Shock Absorber.
  • Aside from the great looks, aluminum alloy will not flex as much as plastic under stress or during high ambient temperatures..
  • ✨【RCAWD Service】:Over 15 YEARS of developing, your support and continuously innovating has lead us to where we are today.We cherish every customer. Any questions, pls contact our Friendly RCAWD team, we will solve it..
Check Stock