Categories

Best Aluminum Nickel Cobalt

Cobalt Rounds (1 Pound | 99.9+% Pure) Raw Cobalt Metal by MS MetalShipper

  • ✔️ Cobalt Rounds (1 Pound | 99.9+% Pure) Our Cobalt Rounds are all sourced directly from the Vale Mining Group in Canada where they are produced and are 100% “virgin” metal (not recycled). We sell this metal by the pound, so if you need 10lbs, simply add a quantity of 10 to your cart. Be sure to see our promotional discounts for certain quantity levels if you would like to save money per pound..
  • ✔️ USAGE - This is very high purity cobalt that can be confidently used in any application where cobalt is required. This item is one of our best sellers because of its versatility and ease of use..
  • ✔️ SIZE - Our 1lb of cobalt rounds - each cobalt round is approximately 1.25 inches in diameter and .25 inches thick..
  • ✔️ SPECIFICATIONS - Atomic Number = 27 | Melting Point (F) = 2723 | Atomic Mass= 58.93 | Boiling Point (F) = 5275 | Density (g/cm3) = 8.9 | Analysis: COBALT 99.9974%, NICKEL 0.0950%, OXYGEN 0.0050%, CARBON 0.0025%..
  • ✔️ PACKAGING - This 1lb of cobalt rounds will arrive sealed inside of heavy duty BPA free plastic to prevent any corrosion or oxidation..
Check Stock

Horseshoe Magnet Power ALNICO Magnets 2 Lb Pull Retrieving Magnet #370-1

  • MAGNET HORSESHOE ALNICO 2 LB. POWER ALNICO MAGNET 370-1 from GENERAL TOOL This is a small size horseshoe magnet, made with industrial grade Alnico (Aluminum/Nickel/Cobalt) Magnets are built for heavy duty use and will not naturally demagnetize over time like other magnets. They are handy in a wide variety of applications and work settings. The horseshoe-shaped Power Alnico Magnet, small size but still has extraordinarily strong pull capacity of 2lb - 0.91 kilo approximately..
Check Stock

Drill America #44 Solid Carbide Drill Bit, DMOD Series

  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
  • performance is similar to uncoated tools.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Manufactured to National Aerospace standard 907.
Check Stock

J.W. Winco 55.3-AN-15-60 GN55.3 Rod-Shaped Raw Magnet, 0.59\ Diameter, 2.36\ Length, Aluminum, Nickel and Cobalt Combination AlNiCo Magnet

  • Magnet: Aluminum, nickel and cobalt combination AlNiCo.
Check Stock

Drill America 1' Reduced Shank Cobalt Drill Bit with 1/2' Shank, DWDCO Series

  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
  • performance is similar to uncoated tools.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Manufactured to National Aerospace standard 907.
Check Stock

AZ Industries, Inc. Cast Alnico 5 Cow Magnet, 1/2\ Diameter x 3\ Long, Ground Finish on Diameter. 5- Pack

  • ~1/2" Diameter x 3" Long with the magnetic poles at the two ends. They are a solid casting and the diameter is ground to size..
  • Made from powerful Alnico Magnet Material (Aluminum/Nickel/Cobalt) which was developed in the early 1930's..
  • These magnets handle high temperatures and are resistant to demagnetization..
  • These magnets are non-toxic and non-corrosive in regular use..
Check Stock

KEO 53528 Cobalt Steel Single-End Countersink Set, Uncoated (Bright) Finish, 90 Degree Angle, 5/16\ - 5/8\ Head Diameter

  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Straight shank, CNC precision cam ground, M35 cobalt steel material, chatter-free cutting action.
Check Stock

Drill America - DWDCO43P12 #43 Cobalt Drill Bit (Pack of 12), DWDCO Series

  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
  • performance is similar to uncoated tools.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Ideal for drilling in tough, high tensile strength materials.
Check Stock

Drill America DWDCO40P12 #40 Cobalt Drill Bit (Pack of 12), DWDCO Series

  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
  • performance is similar to uncoated tools.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Ideal for drilling in tough, high tensile strength materials.
Check Stock

Drill America DWDCO44P12 #44 Cobalt Drill Bit (Pack of 12), DWDCO Series

  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
  • performance is similar to uncoated tools.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Ideal for drilling in tough, high tensile strength materials.
Check Stock

Drill America DWDCO30P12 #30 Cobalt Drill Bit (Pack of 12), DWDCO Series

  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
  • performance is similar to uncoated tools.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Ideal for drilling in tough, high tensile strength materials.
Check Stock

SP Bel-Art Spinbar Teflon Octagon Magnetic Stirring Bar; 50.8 x 8mm, White (F37110-0002)

  • Octagonal shape creates more turbulence and a stronger vortex than a round, cylindrical shape or a polygonal shape.
  • Teflon (PTFE) casing is chemically inert, can be used with corrosive chemicals, and helps reduce friction and wear while spinning.
  • Built-in pivot ring helps reduce vibration and wear during stirring.
  • Internal magnet made from alnico V, an alloy of aluminum, nickel, iron, and cobalt.
  • Casing material is approved for use in food, drug, and cosmetic applications.
Check Stock

KEO 53518 Cobalt Steel Single-End Countersink Set Uncoated Bright Finish 82 Degree Point Angle 5/16 - 5/8 Head Diameter

  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Straight shank, CNC precision cam ground, M35 cobalt, chatter-free cutting action.
Check Stock