Categories

Best Aluminum Pipe tube

Libraton Tube Cutter, Mini Tubing Cutter, Heavy-duty Pipe Cutter with Deburring Tool for Copper Pipe, Aluminum Pipe, Thin Stainless Steel Pipe

  • [High-quality Blade] Libraton pipe cutter blade is made form aluminum alloy, wear-resistant. It will never get rust..
  • [Wide Application] The copper tube cutter can be used to cut copper pipe, aluminum pipe and thin stainless steel tube..
  • [Mini Cutter] The mini tube cutter is specially designed for small diameter tubes in restricted spaces, and is perfect for working in tight and confined spaces, such as air conditioner installation and vehicle repair..
  • [Copper Tube Cutter] Solid ergonomic PVC knob is designed on the bottom of the copper cutter, providing the stability when using the cutter and improving the cutting efficiency..
  • [Usable Attachment] There is a deburring tool attached with the pipe cutter tool, made of sturdy plastic construction and high-speed steel baldes. It can deliver quick, clean and easy inside diameter reaming of different tubes (e.g. copper, aluminum, PVC and stainless steel tubes).
Check Stock

CG2-11 PIPE CUTTER MAGNETIC GAS MACHINE TORCH BURNER BEVELER CUTTING PIPE BEVELING ​MACHINE

  • 【Perfect Set】The set includes a heavy duty tube cutter, mini tubing cutter and an inner-outer reamer. It can not only meet your pipe cutting need, but also fast clean inner reaming and outer deburring needs. The pipe cutting tool is very suitable for cutting pipes of aluminum, copper, PVC, thin stainless steel tube..
  • 【Exquisite Craftsmanship】MATEWORK professional heavy duty pipe cutter is made of high-quality aluminum alloy & SKD steel with high hardness up to HRC52. It has 6 pieces of individual bearings allowing for increasing cutting speed. Precise rolling control makes every cut smoother and more accurate in pipe cutting. After many tests, the cutting capacity up to 3/16 to 2-inch outside diameter with the thickness of 1/6-inch..
  • 【Meet Your Needs At Any Time】Mini tubing cutter is Specially designed for small diameter tubes in confined spaces, cut through 1/8 to 7/8-inch outside diameter pipes with a maximum thickness of 1/10-inch especially for use in restricted areas where a complete turn is not possible, improve your work efficiency..
  • 【Deburring Tool】Pipe reamer has 3/16 to 1-5/16 inch outside diameter capacity. It can be quickly, cleanly and conveniently applied to the inner diameters of copper, aluminum, PVC and soft steel t....
Check Stock

Libraton Copper Tube Cutter 1/4" to 2-3/4", Tube Cutter, Heavy-duty Tubing Cutter for Copper Pipe with Deburring Tool

  • [High-quality Blade] Libraton pipe cutter blade is made from aluminum alloy, wear-resistant. It will never get rust..
  • [Reasonable Design] The tubing cutter is attached with a bearing, fitted on the roller to make the rotation smoother and clean..
  • [Wide Application] The copper tube cutter can be used to cut copper pipe, aluminum pipe and thin stainless steel tube. Cutting range is up to 2-3/4" (70mm)(OUTER DIAMETER)..
  • [Usable Attachment] There is a deburring tool attached with the pipe cutter tool, made of sturdy plastic construction and high-speed steel baldes. It can deliver quick, clean and easy inside diameter reaming of different tubes (e.g. copper, aluminum, and THIN stainless steel tubes).
  • [Cutting Efficiency] Solid ergonomic PVC knob is designed on the bottom of the copper cutter, providing the stability when using the cutter and improving the cutting efficiency..
Check Stock

Tubing Bead Roller Tube Pipe Tubing Beader Tool Intake and Intercooler Piping Fits 5/8″

  • Simply insert the end of the tubing between the dies and start cranking the turning handle.This vise-mounted tool will form a perfect bead on the end of aluminium or copper tubing..
  • Aluminum, steel or stainless steel Intercooler pipe Fits 5/8″ and larger tubing..
  • Aluminum pipe: diameter from 5/8″(16mm) to 4″(102mm),max thickness 3mm.
  • Steel pipe: diameter from 5/8″(16mm) to 4″(102mm),max thickness 1mm.
  • By turning the handle on the side of the tubing beader tool, you can form a desired bead on the end of aluminium or copper tubing..
  • Works best when secured in a vice.Please Note: Always apply the bead before welding..
Check Stock

Steel Dragon Tools® 50767 Model 258 Power Pipe Cutter, Pipe Cutting Machine for 2-1/2-Inches to 8-Inch Schedule 10/40 Steel Pipe

  • ... clamps the pipe firmly during cutting, helping pipe cutter perform cutting for 5 to 50mm pipe with stability and precision, especially for metal & steel material, which frees you from the trouble of unfit pipe and uneven cutting surface because of instability.
  • 【Heavy Duty】 - Made of high density but lightweight aluminum alloy, copper pipe cutter is durable and compact. It won’t be broken after many times of cutting and it will last a long time. And aluminum alloy body makes metal pipe cutter more suitable for high density metal material cutting.
  • 【Clear Cutting】 - Tube cutter with 6pcs ball bearing rollers offers you a smooth cutting, improving cutting efficiency. Some small burrs are inevitable. So our steel pipe cutter comes with a deburring tool, which is made of sturdy plastic construction and high-speed steel blades. It can be used on both sides to perform inner diameter reaming and outer diameter grinding on the inner and outer sides of the incision to prevent scratches.
  • 【Ease Of Use】 - The bottom of the steel pipe cutter is equipped with a knob, which is comfortable to hold, can quickly adjust the tool, and provides a strong clamping force to ensure the stability of cutting. Just rotate the tubing cutter, cut the pipe flawlessly.
Check Stock

2 Pcs Mini Steel Tube Cutter Tool, Mini Tubing Cutter Pipe Cutter Tube Cutter Tool of Diameter from 1/8 to 1-1/8 Inch (3-28 Mm), Tube Pipe Cutter for Copper Brass Aluminum, Thin Stainless Steel Tube

  • Mini Tubing and Pipe Cutter: our tubing cutter is especially designed to assist plumbers, electricians and mechanics.
  • It is made of heavy duty alloy steel, this tube cutter mainly use for cutting copper, brass, aluminum and thin steel pipes.
  • Tube pipe cutter makes clean and precise cuts.
  • Various Tube Cuts: this tubing cutters will efficiently cut copper, brass, aluminum, thin steel and PVC pipes with 1/8 to 1-1/8 inch (3-28 mm) outer diameter.
  • This mini tube cutter provides a fast way to do a clean cut.
  • Convenient and Powerful: our small pipe cutter fits nicely in restricted spaces.
  • The mini steel tube cutter tool features a strong yet lightweight slide and wheel housing and large knurled screw knob for easy control of cutting pressure.
  • Large knurled feed screw knob provides users with ultimate cutting pressure control to produce clean cuts.
  • Multifunctional Pipe Cutter: this tube cutter tool fits for use on construction sites, plumbing jobs, HVAC and refrigeration, heating, manufacturing, decorating or even at garage repair shops and so on.
  • Specifically designed for use in restricted spaces to make tight cutting jobs significantly easier and more manageable.
  • Easy to Operate: cutting thin stainless steel tubing has never been easier.
Check Stock

BoCID Tube Pipe Hose Bead Roller Intake Intercooler Piping Compatible with Clamps 5/8″ DIY Tool

  • This vise-mounted tool will form a perfect bead on the end of aluminium or copper tubing. Simply insert the end of the tubing between the dies and start cranking the turning handle. Give the wheel a quarter-turn with each full rotation of the tubing to gradually tighten the dies against the tubing..
  • Aluminum, steel or stainless steel Intake pipe -Aluminum, steel or stainless steel Intercooler pipe.
  • This his sturdy and cost effective tool makes it easy to add a professional looking bead to all types of tubing. Great for Aluminum up to 16 gauge wall thickness (0.065’’ or 1.65mm) and also suitable for Titanium up to 18 gauge (0.049’’ or 1.25mm)..
Check Stock

MATEWORK Pipe Cutter - Fast Tubing Cutter Set with Mini Cutter & Deburring Tool Pipe Cutter Tool for Cutting 3/16 to 2 Aluminum Copper PVC Stainless Steel Tube for Plumber and Home Working 3PCS

  • 【Perfect Set】The set includes a heavy duty tube cutter, mini tubing cutter and an inner-outer reamer. It can not only meet your pipe cutting need, but also fast clean inner reaming and outer deburring needs. The pipe cutting tool is very suitable for cutting pipes of aluminum, copper, PVC, thin stainless steel tube..
  • 【Exquisite Craftsmanship】MATEWORK professional heavy duty pipe cutter is made of high-quality aluminum alloy & SKD steel with high hardness up to HRC52. It has 6 pieces of individual bearings allowing for increasing cutting speed. Precise rolling control makes every cut smoother and more accurate in pipe cutting. After many tests, the cutting capacity up to 3/16 to 2-inch outside diameter with the thickness of 1/6-inch..
  • 【Meet Your Needs At Any Time】Mini tubing cutter is Specially designed for small diameter tubes in confined spaces, cut through 1/8 to 7/8-inch outside diameter pipes with a maximum thickness of 1/10-inch especially for use in restricted areas where a complete turn is not possible, improve your work efficiency..
  • 【Deburring Tool】Pipe reamer has 3/16 to 1-5/16 inch outside diameter capacity. It can be quickly, cleanly and conveniently applied to the inner diameters of copper, aluminum, PVC and soft ste....
Check Stock

Libraton Pex Cutter 1-1/4\

  • 【Premium Quality】Libraton PVC pipe cutter is made of durable hardness aluminum alloy steel. The thick blade used is of SK4 material with precision sharped..
  • 【Widely Application】The pex pipe cutter (cutting range: up to 1-1/4-inch or up to 31mm) is designed up to cut pipes of various plastic materials (PVC,CPVC,PP-R, PEX, PE, Rubber Hose etc.). The tube cutter (cutting range: 1/8inch to 7/8inch or 3-22mm) can be used to cut pipes made of aluminum and copper. It is an essential cutting tool set for your home handyman, plumbers, electricians, and vehicle mechanics..
  • 【Working with Safety】There is a safe lock in the bottom of pex cutting tool. You can buckle it when you don't use the cutter..
  • 【Reasonable Cutting Tool Composition】The PVC pipe cutting tool set includes three compositions, PVC pipe cutter x1, mini tube cutter x1 and PTFE seal tape x3, which can meet your various need when doing the pipe or tube cutting work..
  • 【Attension】This PEX cutter is suitable for most PEX pipes and thin PVC pipes. IT IS NOT SUITABLE FOR THICK PVC PIPES AND PVC PIPES WITH METAL LAYERS. Also, we offer a 12-month lifetime warranty. We have an after-sale service team here for you to ensure your 100% satisfaction..
Check Stock

Tubing Flaring Swage Tool Kit - Heavy Duty Steel Swage Tool Set for Copper Plastic Aluminum Thin Pipe With Tubing Cutter Tubing Bender & Ratchet Wrench

  • Note: The picture is for reference only, the actual product shall prevail. Material:Aluminum alloy steel cutter body, surface plating..
  • Tubing Cutter: suitable for cutting pipe diameter between (3-28mm)1/8-inch to 1-1/8 Inch for Pipe Copper PVC Thin Stainless Steel Tube..
  • 3 in 1 Pipe Bender: Three sizes of tubing 1/4", 5/16" and 3/8". Bending 0-180 degree copper , aluminum ,brass,and thin stainless steel pipes in the....
  • Double Flaring Tool Kit:This flaring tool kit is an tool for pipe flaring, and it can be used to make single or double flares on copper, brass and....
  • Easy to Use:The Screw of the pipe cutters provide easy control of cutting pressure for clean cuts.Flare groove rollers make rotation simple and....
Check Stock

Bonvoisin 3/8 1/2 OD Tubing Bender 2 in 1 Manual Pipe Bender 180° HVAC Soft Copper Aluminum Pipe Bending Tool for Air Conditioning Refrigeration Repair

  • [Parameters] - Application: only for copper / aluminum pipes.
  • [High Quality] - The tube bender is forged from high-quality carbon steel, which is light and durable.(NOTE: if the pipe wall thickness.
  • [2-in-1] - This tubing bender tool is a 2 in 1 tool and will fit 3/8’’、1/2’’ tubes, which is convenient for different size tube bending and....
  • [Humanized Design] - (1)The manual pipe bender uses the principle of leverage, with which you can easily bend the pipe. (2)The round hole of the upper....
  • [Wide Applications] - This pipe bender is suitable for HVAC, air conditioning, and refrigerator pipe repairs..
Check Stock

iCrimp Copper Tubing Cutter, 3/16-inch to 1-1/4-inch Tube Cutter, for Stainless Steel, CSST Tubing Cutter with 2 Pack Replacement Blades

  • Metallic Tubing Cutter: CT-532 pipe and tubing cutter is designed for cutting copper, brass, aluminium, thin-walled steel, 5-32mm(3/16’’ to 1-1/4’’). Made from aluminum alloy and Wear-resistant steel blades ensures a durable and sturdy usage.Ergonomic knob reduce fatigue..
  • Neat Cutting: This pipe cutter makes fast, easy cuts in standard pipes. With clean, no burrs and smooth cuts on copper tubes and corrugated stainless steel tubing without deforming the peaks of corrugations..
  • Smooth Operation: Professional Tubing Cutter features an accurate 6-roller tracking system. This keeps the tube from threading and helps eliminate spiraling. The rollers and the blade utilize ball bearings for smoother action on thin stainless steel, all soft tubes like aluminum, copper, and PVC..
  • Free Cutter Wheel: Replacement blade is constructed with high carbon steel for long life. Precision grinding delivers a sharp cutting edge. Optimized for cutting copper tubing..
  • Applications: Perfect for industrial plumbing, HVAC applications, this pipe cutter high grade cast malleable steel frame and hardened alloy steel rollers for added durability. Also ideal for installation of Sharkbite Push to Connector fittings when creating copper tubing diversions..
Check Stock

Libraton Pipe Cutter Tubing Cutter 3/16 to 2 Outer Diameter Copper Pipe Cutter Tube Cutter with Deburring Tool Copper Cutter Pipe Cutter Tool for Copper and Thin Stainless Steel Tube

  • [High-quality Blade] Libraton pipe cutter blade is made from SKD-grade material, wear-resistant. It will never get rust..
  • [Reasonable Design] The tubing cutter is attached with a bearing, fitted on the roller to make the rotation more smoother and clean..
  • [Wide Application] The copper tube cutter can be used to cut copper pipe, aluminum pipe and thin stainless steel tube. Cutting range is up to 2" (50mm)(OUTER DIAMETER)..
  • [Usable Attchament] There is a deburring tool attached with the pipe cutter tool, made of sturdy plastic construction and high-speed steel blades. It can deliver quick, clean and easy inside diameter reaming of different tubes (e.g. copper, aluminum, PVC and stainless steel tubes).
  • [Cutting Efficiency] Solid ergonomic PVC knob is designed on the bottom of the copper cutter, providing the stability when using the cutter and improving the cutting efficiency..
Check Stock