Categories

Best Aluminum Precision Parts

CrazyHobby 4PCS Aluminum Front & Rear Suspension A-Arms Set and Tie Bar for 1/10 Traxxas Slash 2WD Upgrades Parts, Replacement of 2555 3631 2532 (Blue)

  • The Upgrade Parts Compatible with Traxxas 1/10 Slash 2WD Short Course Truck. NOT fit Stampede 2WD / Rustler VXL..
  • Come with Screw Pins, Easy upgrade from the original parts, easy to install..
  • Made of Aluminum Alloy, Anodized, CNC machined, High precision, Lightweight & Durable..
  • You will get: Aluminum Front Lower Suspension Arms Set(Left&Right).
  • Aluminum Rear Lower Suspension Arms Set(Left&Right).
  • Metal Aluminum Tie Bar. Replaces Stock Part# 2555 3631 2532..
  • 100% New, Genuine CrazyHobby Products,Exquisite workmanship & Durable,Buy with Confidence,Friendly Customer Service.
Check Stock

Boosted Solutions same as ProCharger big red Bypass bov blow off valve w/Flange

  • Photo of internal parts is in our item gallery for you to see!.
  • This BLOW OFF VALVE was made by boosted solutions and is an exact same blue print blow off valve as procharger for 1/3 the price. Same high quality material and same exact specs as big red. 60MM and for 700 to 1200 horse power. Comes with aluminum flange and bolts. Please see all pictures with the parts..
  • Full details listed below in description!.
Check Stock

Huanyu Jewelry Polisher Tumbler 3kg 6.6lbs Barrel Polishing Machine with 5-Stage Speed Regulation / Time for Natural Stone/Metal/Parts Polishing Chamfering Rust Removal

  • BARREL POLISHING: The most suitable polisher for intricate detail polishing, deburring, precision polishing, polishing of small parts, rust removing polishing, and surface polishing. From precision parts to small parts, irregular accessories such as metal, gold, silver and copper, rings, natural stones, etc. can be polished with a margin.
  • MULTIFUNCTION: Automatic forward / reverse / rotation switch, 0-60 minute time setting and 5-step speed adjustment of 150-800 rpm. You can finely polish parts.
  • SMALL SIZE: Capacity: 3 kg. Polishing tank: 100 * 135 mm, entrance 8 cm. Includes 450g polishing ball.
  • EASY TO USE: Just put a polishing ball, half water, and accessories in the polishing tank and set the time and speed. No artificial controls are required during use.
  • HIGH QUALITY: Acrylic polishing tub, aluminum alloy body, wear resistant and can be used for a long time..
Check Stock

Electric Cigarette Injector Machine Cigarette Rolling Machines

  • 【Factory Provides】ONE·MIX Cigarette machine!We are a factory specializing in the production of cigarette rolling machines, and we have been committed to providing our customers with various and high-quality cigarette rolling machines..
  • 【New Design】The precision of the internal parts of the cigarette rolling machine has been upgraded, which is more robust than before the upgrade..
  • 【New Design】Electric Cigarette Injector Machine Improved gear quality!which is more robust than before the upgrade..
  • 【High Precision】Blunt roller Makes King sized & 100mm cigarettes!Aluminum frame and spoon track for smooth injection, High precision cutter for a better compression result.
  • 【Guarantee】If you encounter quality problems with this rolling machine, please.
Check Stock

4Pcs Tapered Ball Nose End Mill 0.25MM-1MM with 0.5MM Tip Diameter CNC Router Bits Set 2D 3D Woodworking Tool 2 Flute CNC Router Bits

  • 【High Quality】The end mills are made of ultra-fine tungsten carbide steel alloy, its nano black coating/titanium coating with high hardness and heat resistance..
  • 【End Mill Bits Set】4Pc【End Mill Set】4Pcs ball nose bit 2-flute, Nano black coat and titanium coat CNC router bits, will satisfying your different needs.s ball nose bit 2-flute, Nano black coat and titanium coat CNC router bits, will satisfying your different needs..
  • 【Parameter】Ball raidus 0.25mm, 0.5mm, 0.75mm, 0.1mm, flute length:15MM, overall length 1.5 inch, single side angle 5.12°..
  • 【Wide Compatibility】Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing,they are compatible with most desktop CNC machines..
  • 【Wide Application】PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, aluminum and other precision parts processing..
Check Stock

Traxxas 5186A Rubber Tires Mounted on Blue-Anodized Aluminum Wheelie Bar Wheels (pair)

  • Machined Aluminum Ball Bearing Wheels with Rubber Tires.
  • Precision 6061-T6 aluminum wheels feature a stunning anodized finish and ride on rubber-sealed 5x8mm ball bearings.
  • Soft compound rubber tire that reduces side-to-side movement for stable, consistent wheelies.
  • Includes 5x8mm ball bearings (4)/ axles (2)/ rubber tires (2).
  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.
  • This product is made from high quality materials and designed for lasting performance.
  • This is for use on RC vehicles, consult your user's manual for exact parts listings.
Check Stock

TCI Precision Metals 6061 Aluminum Sheets and Plates Precision Ground Flat and Milled .250' X 12.000' X 18.000' Thick

  • MACHINE-READY BLANKS – Our Standard Sized Machine-Ready Blanks are available in a wide range of pre-configured sizes. Parts are clean and prepped, ready for final machining..
  • GROUND AND MILLED – We do all the hard work so you don't have to. The 6-side line aluminum sheets and plates are precision ground on 2-sides (thickness) to +/-.002” and milled on the length and width to +/-.002”..
  • REDUCES PREP TIME – Aluminum plates arrive clean and ready to go from receiving to machining without prep time. Reduces setup time, scrap, and overall cycle time..
  • VERY VERSATILE – 6061 Aluminum metal plates are very versatile. Can be used in a wide variety of fabrication projects due to its machinability, bending, weldability, and corrosion resistance..
  • PRECISION IS IN OUR NAME – Our blanks are made flat and parallel (as close as .002″) and tighter, and designed to stay that way..
Check Stock

Evike ARES Licensed Remington MSR Bolt Action Spring Powered Airsoft Sniper Rifle Model MSR-338 / Tan

  • ◙ This is not a listing for an individual Airsoft part. No parts are designed for real weapons. Batteries, scopes, and other accessories NOT....
  • Bolt action single shot spring powered rifle.
  • Precision CNC machined aluminum receiver.
  • Precision CNC machined handguard and stock.
  • 545mm Picatinny flat top rail for optics.
Check Stock

RiToEasysports 2Pcs Universal RC Servo Arm,25T Steering Gear Arm Servo Arm for 1/10 RC Car (Silver)

  • ¡¾Durable And Sturdy¡¿Made of high quality aviation aluminum alloy material, durable, long service life.Hard aluminum construction for precision and durability..
  • ¡¾Compatible With¡¿Special designed for 1/8 1/10 RC car model, 31 x 10mm / 1.2 x 0.4in of the accurate size.Compatible With TRX4..
  • ¡¾Easy to Install¡¿Small size, light weight, no extra burden, and easy to install and disassemble..
  • ¡¾Stable Performance¡¿CNC machining makes it accurate size, stable performance, with high strength and durability and not easy to deformation..
  • ¡¾Wonderful Upgrade Parts¡¿25T servo arm provides cushioning and protection for your RC car model, wonderful upgrade parts..
Check Stock

NCY 0300-0106 Black Billet Aluminum Frame Extension for the Honda Ruckus Scooter

  • Stretch the rear end of your Fits Honda Ruckus / Zoomer 6.5 inches with the NCY Billet Aluminum Frame Extension Kit! This can only be described as the cleanest Frame Extension kit on the market to date. We went out of our way to design an extension kit that flows with the form of the Fits Honda Ruckus scooter. The NCY billet Aluminum Frame Extension kit is precision machined from 6061-T6 for the ultimate in durability. All parts feature a long-lasting black anodized finish. NCY Billet.
Check Stock

WEISHUJI Aluminum Turnbuckles and Camber Links with Rod Ends,Adjustable Aluminum Steering Linkage Servo Link Pull Rod Turnbuckle for 1/10 RC Car, Red

  • Aluminum Turnbuckles and Camber Links with Rod Ends are OEM Hop-Up Upgrade Parts for RC Car 1/10 Scale Traxxas Slash 4x4..
  • Aluminum Turnbuckles and Camber Links with Rod Ends adds strength and adjustability to your RC Car..
  • Aluminum Turnbuckles and Camber Links with Rod Ends Length is approx 79-102mm (Min-Max)..
  • Aluminum Turnbuckles and Camber Links with Rod Ends is made of Aluminum Alloy with High precision..
  • Package of Aluminum Turnbuckles and Camber Links with Rod Ends includes: 2 x Adjustable Turnbuckles Camber Linkage Rod 4 x Screws.
Check Stock

Woodpeckers Stainless Steel Square - 12" -1282 – 2019

  • LASER ENGRAVED ALUMINUM - The blade on this T Square is made out of precisely machined aluminum that is perfectly fitted to a solid, billet handle with two support lips to prevent tipping and a perfectly machined edge for true squaring..
  • INCLUDED RACK-IT MOUNT - Each T-Square comes in its own Rack-It mount for safe storage and organization..
  • PRECISION - The blade itself has precisely spaced 1MM holes drilled every 1/16”. Stick a pencil in the hole, slide it along your work piece and presto, a perfectly spaced line, accurately following the edge of your stock..
  • AVAILBALE IN 4 SIZES - 4 different sizes are available, 12”, 24”, 600mm and 32”. The 12” size is ideal for work with solid lumber and smaller cabinet parts. The 24”, 600mm and 32” are better suited for work with sheet goods, larger cabinet parts, entertainment centers and bookcases..
  • MADE IN USA - Like all Woodpeckers products, these T-squares are proudly machined and carefully inspected in our Strongsville, OH facility, just south of Cleveland..
Check Stock

IMT-PRO LITE IP510S Professional Wet cutting Rail Saw For Granite With 12ft Rail

  • Lightweight 49 lbs (including rail) aluminum/stainless steel construction.
  • Durable, solid aluminum rails for precision cutting of toughest & hardest materials.
  • One year motor warranty , Three year warranty on all other parts.
Check Stock