Best Aluminum Profile Process
Fulton Universal Aluminum Miter Gauge Fence with an Aluminum Flip Stop 18” Left Reading Tape 18” Right Reading Tape
- ...ur table saw you always want to make sure that have enough support of your stock when feeding it through the blade. The table saw blade is rotating toward you at a high rate of speed and if your workpiece moves to the side, the result can be scary and downright dangerous. With the help of a miter gauge and with our Aluminum Miter Fence secured to it, you will have full support all the way up to the blade on most of your miter angle cuts..
- The Aluminum Miter Fence has been cut at 45 degrees on both ends of the fence. Doing this allows you to get as close to the blade as possible so your workpiece is fully supported throughout the cutting process. Straight cut or 90 degree cut fences have a large gap between the fence and the blade because it can not get as close with the straight cut ends on the fence..
- Many times when we make miter cuts on our table saw, we need 2 or more pieces that are the exactly same length. While using the included measuring tapes that are included are pretty good at this, we have also included a handy flip stop that locks into any location along the length of the fence. This allows you to make repetitive length cuts without worrying if the pieces will end up the same. The flip stop can can simply be flipped it up and out of your ....
Check StockReptilia DOT Mount for Aimpoint Micro / CompM5 (Lower One Third) (Flat Dark Earth (FDE))
- Compatible with Aimpoint – Micro R-1, H-1, H-2, T-1, T-2, CompM5, – Sig – ROMEO4, ROMEO5 – Vortex Optics – Sparc I & II – Primary Arms – Micro Dot & Advanced Micro Dot – Holosun Technologies – HS403.
- Spring-loaded nitrided steel clamp and mounting bolt simplify the installation process.
- Sits flush with the body of the mount for a low-profile, anti-snag design.
- Type III hardcoat anodized 7075 aluminum.
Check StockKOOTANS 100pcs 2020 Series M5 Sliding T Nuts Metric M5 Thread Slide in T-Nut for 20x20 Standard 6mm T-Slot Aluminum Extrusion Profile
- TYPE: Sliding nut, suitable for Aluminum Extrusion Profile 2020 series T-Slot 6mm..
- MATERIAL: High quality carbon steel,have high hardness, surface is Zinc-plated for good rust resistance..
- SLIDER SIZE: Length 10mm, height 4.5mm, width 9mm.
- Sliding nut can only be inserted into T slot from the end profile, it owns the most excellent connection strength and reliability. Very easy to be slide into T slot of aluminum profile..
- 2020 Series Aluminum Profile Sliding T-Nuts widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects, etc..
Check StockKOOTANS 4 Sets Alloy Hinges for 2020 Series 6mm T-Slot Aluminum Extrusion Profile 3D Printer Frame
- Material: Zinc Alloy,It Has Greater Bearing Capacity than Aluminum Alloy.
- Generally Used as Fixing Hinge. Easy to Install and Apply.
- 20S Profile Accessory Zinc Alloy Hinge for 2020 Aluminum Profile Extrusion Frame.
- Fit: 2020 Aluminum Extrusion Profile T Slot 6mm.
- Complete Hinge Kit, Save Time on Purchases.
Check Stock10Sets Black 2020 Series Aluminum Profile Connector Set, 10pcs Corner Bracket, 20pcs T Nuts and Hex Screw Bolt for Slot 6mm 20S Aluminum Rail Accessories
- Used on 20mm x 20mm, 10 series (1” x 1“ ) extrusion profile, Package content: 10pcs 20mm 90 degree solid cast aluminum corner bracket, 20pcs carbon steel galvanized M5 T-slot nuts, 20pcs black M5x8mm hex socket cap screw bolt..
- 2020 series aluminum profile connector set widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects..
- Aluminum corner bracket used to connect pieces of 20mm aluminum extrusion at a 90 degree angle suitable for most of metric 20 series aluminum profile extrusion..
- Carbon steel hex socket button head bolts screws nuts surface chrome finish Anti-corrosion,rustless,non-pollution..
- T-Slot aluminum extrusion M5x8mm hardware slide in T-Nuts made from high quality carbon steel galvanized..
Check StockWestHunter Optics 30 mm Cantilever Picatinny Scope Mount | Black
- Position the center of the scope tube at a height of 40 mm/1.57 in from the base.
- The high profile mount fits 21mm Picatinny rails and for both 30mm and 25.4 mm (1 inch) tube optics with up to a 75mm outer objective diameter.
- Net weight 150 g / 5.29 oz, 2.48 in/63 mm offset distance.
- The finishing touch to optics and the rail combination. Combining rock-solid reliability and strength with high quality machining to ensure ultimate accuracy and consistency..
- Precision CNC Machined from 6063 T5 aircraft-grade aluminum alloy and finished in the anodizing(Disadvantages: The anodizing process uses the general level, please be cautious if you have a high-quality requirement for the appearance).
Check StockBroan Model 157 Low-Profile Solid Wire Element Ceiling Heater (Renewed)
- This Certified Refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, a minimum 90-day warranty, and may arrive in a generic box. Only select sellers who maintain a high performance bar may offer Certified Refurbished products on Amazon.com.
- Radiant heat from an enclosed metal-sheathed element.
- Low-profile housing with satin-finish aluminum grille extends only 2 3/4-inch from ceiling.
- Mounts easily to any standard 3 1/2-inch or 4-Inch round or 4-Inch octagonal ceiling electrical box.
Check Stockuxcell Roll-in Spring M6 T Nut, Roll Ball Elastic Nuts for 4040 Series Aluminum Extrusion Profile, Pack of 12
- Made from carbon steel,have high hardness, surface is Nickel-plated for good rust resistance..
- Used for T-slot aluminum profile 40x40 series..
- Easy to be roll into T slot of aluminum profile..
- Package Content: 12 Pcs x 4040 Series M6 Roll Ball Elastic T-Nuts..
- 4040 Series Aluminum Profile T-Nuts widely Use to build CNC routers, 3D printers, CNC laser cutters, CNC plasma cutters, robotics projects, 3D carvers, machine guards, workstations, etc.
Check StockThe Drop
- A GAME-CHANGING KEYBOARD, NOW IN HIGH PROFILE: The CTRL High-Profile is just like the original CTRL, but now it comes with a tall CNC-aluminum case that covers the switches. A versatile tenkeyless (TKL) keyboard designed with input from the Drop community, it raises the bar again for mechanical keyboards..
- PREMIUM ENGINEERING: Constructed with a tall CNC-aluminum frame with a built-in switch plate and magnetic legs, the CTRL High-Profile is rock-solid and ready for any setup..
- KAIHUA SPEED SILVER SWITCHES: Utilizing the popular Cherry MX form, these speedy linear switches are made with 3.5 millimeters of total travel with 1.1–1.4 millimeters of pre-travel. They’re easy to press and boast a 70-million lifetime click rating..
- HOT-SWAPPABLE SWITCH FUNCTIONALITY. Want to switch your switches? Customize the CTRL High-Profile with ease thanks to hot-swappable switch sockets, which allow you to swap switches in seconds—no soldering required..
- OPTIMIZED PER-KEY LIGHTING WITH MILLIONS OF COLORS: The CTRL High-Profile is illuminated with fully customizable RGB backlighting and under-li....
Check StockAluminum Safety Hard Hats Helmet Full Brim with Ratchet Suspensions Silver Safety Cap One Size Helmet Fits Most
- HIGH PERFORMANCE ALUMINUM: The hard hat is made from an aerosapce aluminum with key reinforced areas. This makes the aluminum hard hat very comfortable, lightweight and durable..
- LOW PROFILE: The low profile of the ridgeline allows for a more natural, comfortable and secure fit that sits lower on the crown of your head and provides more coverage than a higher-profile sitting hard hat..
- SIMPLE MULTIPOINT ADJUSTMENT: Simple multipoint adjustment allows you to quickly find the right fit for your head shape. Soft cloth suspension “X”straps for a comfortable fit..
- 4-WAY ADJUSTMENT: The 4-way adjustable harness points allow you to adjust harness forward, backward, up, down, giving you the perfect fit for customized comfort. A verified pressure pad, replaceable and washable sweatband, and the adjustable, padded swinging rear suspension provides ultimate comfort and a secure fit..
- WIDE APPLICATION: The aluminum hats are the helmet of choice for work in demolition, logging, construction, oil and gas.
- as well as many other high risk industries..
Check Stock1.5\ 5/16-18 T-Bolt, 5 Pack
- M6x20mm Hammer Head Bolt T Screw size: 15 x 10 x 6mm/0.59" x 0.39" x0.24"(LWT).
- Metal Type:nickel plated , Carbon Steel.
- 2020 Series European standard Aluminum Profile Accessories widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, robotics projects, machine guards, workstations, etc.
- T-shaped screws are used for aluminum profile design, suitable for standard 6mm T-slot 20 European standard aluminum profiles.
Check StockKOOTANS 2pcs/lot Zinc Alloy Flexible Pivot Joint Connector for Aluminum Extrusion Profile 3030 Series Slot 8mm
- Flexible Pivot Joint Connector, used to connect pieces of 30mm aluminum extrusion with any degree, free adjust, Then fixed.
- Convenient to use, they can be simply fastened with bolts and nuts, (bolts and nuts are not included).
- 3030 Series Aluminum Profile Connector widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects.
Check StockGameSir GK300 Wireless Mechanical Gaming Keyboard, 2.4GHz Bluetooth Game Keyboard, TTC Red Switches 1ms Low Latency Mechanical Keyboard with 104 Standard Keys for Windows PC, Laptop, iPad and Mac
- Wireless Keyboard: Designed for gamers who demand outstanding performance of mechanical switches and freedom of gaming. The precision-machined aluminum alloy top plate is the integrated stamping with CNC engraving process, allowing for both a minimal design and a beautiful aesthetic..
- Dual-mode Connection: Dual-mode is designed for Wireless Gaming Keyboard. One mode is 2.4GHz that support computer system like Windows 7 Windows 8, Windows 10 or higher, MacOS. The other model is Bluetooth that support smartphone include iOS 7.0 or higher, Android 4.4 or higher..
- Agility X 2.4GHz wireless technology: This is a pro-grade wireless solution, providing instant wireless connection with 1ms ultra low latency, which give the unparalleled operating experience..
- TTC Blue Switches: Adopt 104 TTC mechanical blue switches which is a good choice for those who enjoy a tactile bump and feedback without the audible click, which enable up to 50 million keystroke lifespan..
- Compact Aluminum Design: Aluminum alloy drawing panel material, it’s ultra compact while maintaining a lightweight frame and low-profile excellent full-sized keyboard layout..
Check Stock