Categories

Best Aluminum Profile Processing Machin

High Speed 400 MM 16 INCH Stroke Belt Drive Linear Guide Rail Motion Slide Actuator Module for CNC Linear Position Kit

  • High precision belt driven linear actuator, the positioning repeatability is ± 0.1mm.
  • Convenient and Easy in use, Smooth operation and low noise,maximum speed 1500mm/s.
  • Comes with NEMA 23 motor base(not motor) and foot mounting bracket, free to replace.
  • Standard aluminum alloy profile structure, sandblasted on the surface, beautiful and rustproof, precision hole position CNC processing.
  • Can be directly fold cross slide, gantry sliding table, 3-axis, 4-axis, multi-axis combination in use..
Check Stock

High Speed 700 MM 28 INCH Stroke Belt Drive Linear Guide Rail Motion Slide Actuator Module for CNC Linear Position Kit

  • High precision belt driven linear actuator, the positioning repeatability is ± 0.1mm.
  • Convenient and Easy in use, Smooth operation and low noise,maximum speed 1500mm/s.
  • Comes with NEMA 23 motor base(not motor) and foot mounting bracket, free to replace.
  • Standard aluminum alloy profile structure, sandblasted on the surface, beautiful and rustproof, precision hole position CNC processing.
  • Can be directly fold cross slide, gantry sliding table, 3-axis, 4-axis, multi-axis combination in use..
Check Stock

ATI Radeon HD 3450 256MB DDR2 PCI Express (PCI-E) DMS-59 Low Profile Video Card w/TV-Out & DMS-59 Cable

  • ATI Radeon HD 3450 256 MB GDDR2 PCI Express Low Profile Video Card General Features:.
  • Low profile PCB ATI Radeon HD 3450 graphics processing unit (GPU) 40 stream processing units.
  • 256 MB GDDR2 memory 64-bit memory interface PCI Express x16 interface.
  • Superscalar unified shader architecture High-speed 128-bit HDR (High Dynamic Range) rendering.
Check Stock

Electric Linear Rail Guide 200mm Ballscrew 1605 Slide Stage Load 250kg Nema23 Motor Base for DIY CNC Z Axis

  • Stork:200mm/8” 400mm/16” 600mm/24” 800mm/32”.
  • Double HG15 Heavy Duty Linear Rail Guide and SFU1605,Ball screw accuracy: C7(±0.02mm).
  • Equipped with BK12 Special shaft end support and high-intensity motor bracket.
  • Standard aluminum alloy profile structure, sandblasted on the surface, beautiful and rustproof, precision hole position CNC processing.
  • Convenient and Easy in use, Smooth operation, high speed and low noise,can be directly fold cross slide, gantry sliding table, 3-axis, 4-axis, multi-axis combination in use.
Check Stock

Shure MV5C Home Office Microphone, Conferencing Microphone for Mac & PC, Crystal Clear Voice & Call, Durable & Portable Design, Quick & Easy Setup, Works with Team, Zoom & Others - Black (MV5C-USB)

  • ...ng apps via simplified set-up out-of-the-box.
  • STUDIO-QUALITY SOUND FOR THE HOME OFFICE: Users can speak with confidence that their voice will be heard clearly during virtual pitches, presentations and proposals due to enhanced audio quality.
  • IMPROVED VOICE INTELLIGIBILITY & MINIMIZED REVERBERATION: Speech enhancement processing improves intelligibility and consistency of your voice. Directional microphone element for increased voice isolation and minimized room reverberation.
  • EASY CONTROLS WITH INTEGRATED LED PANEL: Easily accessible controls on the top of the MV5C provide hardware control of input and output modes, headphone volume, and microphone muting.
  • INCLUDED FULLY ADJUSTABLE ALUMINUM DESKTOP STAND: Included anodized aluminum desktop stand with adjustable microphone angle for optimal placement.
  • LOW PROFILE CLASSIC DESIGN: Low-profile, non-intrusive design fits in premium home office setup & measures only 2.5 inches / 7 cm tall (5.5 inches / 14 cm on included stand).
  • HEADPHONE OR COMPUTER PLAYBACK MODE: Configurable microphone playback via built-in headphone output or computer playback via computer speakers.
  • WHAT’S IN THE BOX? Shure MOTIV MV5C Home Office Microphone with 3.2 ft (1m) USB-A cable and 3.2 ft (1m) USB-C cable.
Check Stock

GBJ APKT1604 PDFR Aluminum R0.2 Cutting Inserts Aluminum Cutting Tool Turning Tool CNC Tools AL+TIN Alloy Wood

  • ☞Material:Using imported substrates, the service life is greatly increased. Stable, durable and sharp when cutting..
  • ☞ Advantage: The cutting edge is sharp, the processing is brisk, and the chip removal is smooth. The cutting edge is specially treated, and the products processed have a high degree of smoothness and a mirror effect..
  • ☞ Processing range: JW40-aluminum alloy general processing and non-ferrous metal. Especially high-silicon aluminum alloy. 02 angle is especially suitable for finishing..
  • ☞ Package includes: 10pcs (Boxed) APKT1604PDFR-MA for Aluminum Inserts.
Check Stock

Linear Stage Actuator 100mm Ballscrew 1605 Double Optical Axis Linear Rail Guide Manual Slide Stage C7 with Ruler for CNC Router Z-axis

  • Quality ballscrew with accuracy up to ±0.03mm,also low noise when working；.
  • linear motion actuator with mounting bracket and HD ruler,Laser engraving hand wheel with pointer 360 equal parts.
  • Linear rail Stork:100mm/4” 200mm/8” 300mm/12” 400mm/16” free for users to choose.
  • Standard aluminum alloy profile structure, sandblasted on the surface, beautiful and rustproof, precision hole position CNC processing.
  • Convenient and Easy in use, Smooth operation, high speed and low noise,can be directly fold cross slide.Fast Delivered 4-5 days after shipping..
Check Stock

Tealyra - Golden Dragon Yellow Tea - Rare Unique Loose Leaf Tea - Organically Grown - Antioxidants Rich - Caffeine Medium - 112g 4-ounce

  • Our Golden Dragon is a fine Chinese tea. True yellow tea.
  • which is only grown in China, is prepared in a similar way to green teas..
  • uring processing, the leaves are left damp to slightly oxidize the tea, turning the leaves extends the withering time and diminishes astringency, this....
  • This is the unique processing of tea that makes it an exquisite “yellow tea†with its own unique flavor profile..
  • This Golden Dragon tea is nicknamed “10 degree yellow tea†by the artisans as it has a unique minimal 10% fermentation..
  • Once steeped to a deep golden hue, you will appreciate a wonderfully floral tea with a rich taste and lively character. Its flavor profile is similar....
Check Stock

KELEN 45 Degree Offset Flip Up Sight, Rapid Transition Backup Fiber Optics Iron Sights Low Profile Front and Rear Sights with Red and Green Dots Compatible with Picatinny Weaver Rails

  • The 45 degree sights,45 degree flip up sights is made of high quality aluminum alloy processing, non-rust black anodized finish，excellent performance, light and durable..
  • 45 degree offset flip up sight,45 degree flip-up front and rear sights with red and green dots compatible with most Picatinny rail and Weaver rails..
  • Both left-handers and right-handers could use the 45 degree sights freely and easily. 45 Degree Sights with Low-Profile Design makes transitioning from optical to iron sights simply..
  • This offset sights 45 degree can quickly transition between iron sights and scopes. Fully adjustable for Windage. Spring load push button with flip-up design, allowing for quick deployment and adjust the deployment according to your needs..
  • This 45 degree offset fip up iron sights has a Low-Profile design. It won't take up too much space or Interfere other accessories when It's flipped Up. These angled sights work perfect as a backup sight and give you a double assurance..
Check Stock

45 Degree Offset Flip Up Iron Sights, Rapid Transition Backup Fiber Optics Iron Sights Low Profile Front and Rear Sights with Red and Green Dots Compatible with Picatinny Weaver Rails

  • The 45 degree sights,45 degree flip up sights is made of high quality aluminum alloy processing, non-rust black anodized finish，excellent performance, light and durable..
  • 45 degree offset flip up sight,45 degree flip-up front and rear sights with red and green dots compatible with most Picatinny rail and Weaver rails..
  • Both left-handers and right-handers could use the 45 degree sights freely and easily. 45 Degree Sights with Low-Profile Design makes transitioning from optical to iron sights simply..
  • This offset sights 45 degree can quickly transition between iron sights and scopes. Fully adjustable for Windage. Spring load push button with flip-up design, allowing for quick deployment and adjust the deployment according to your needs..
  • This 45 degree offset fip up iron sights has a Low-Profile design. It won't take up too much space or Interfere other accessories when It's flipped Up. These angled sights work perfect as a backup sight and give you a double assurance..
Check Stock

Linear Guide Slide Table 8mm Lead Ball Screw Motion Rail Aluminum Alloy CNC Linear Guide Stage Actuator for 3D Printer Engraving Machine(300mm-Silver)

  • Stork:298mm/11.7”,SFU1605,Ball screw accuracy: C7(±0.02).
  • Equipped with mounting bracket and HD ruler,Laser engraving hand wheel with pointer 360 equal parts.
  • Sliding table bottom plate size (width * height)：89*61mm，double optical axis guide.
  • Standard aluminum alloy profile structure, sandblasted on the surface, beautiful and rustproof, precision hole position CNC processing.
  • Convenient and Easy in use, Smooth operation, high speed and low noise,can be directly fold cross slide, gantry sliding table.Fast delivery:delivered 4-6 days after shiping.
Check Stock

TAUFAOD Palm Router Electric Hand Trimmer Wood Router Collets Woodworking Tool Laminate Trimmer 110V 800W (800W Blue)

  • Can be used for wooden processing, cabinet processing, handicraft production and DIY. Easy to wood trimming, grooving and drilling..
  • Transparent base, processing accuracy easily recognizable..
  • Dressing guide, roller running along the curve,ensuring cutting is exact. Curve processing fine..
  • Straight guide, thicker models are stable and not deformed. Straight processing is stable..
Check Stock

Mini Metal Lathe Machine CNC DIY Tool Benchtop Wood Lathe Woodworking for Hobby Sience Education Modelmaking, AC110V 50/60HZ (Ship from USA)

  • ...gence of children. So as to be a good didactical tool for children. It is also an ideal tool for DIY hobbyist and modelmaker to make various craft. .
  • This is a Micro desktop lathe which can used for turning, drilling, boring, threading and other processing Made of advanced aluminum alloy, durable and non-deformable for usage. Note: When processing harder materials, the feed rate should be smaller, and the operation of aluminum and copper materials should be slow. Patience is required.which is slower than processing wood..
  • Processing Materials: Wood, Plastic, Aluminum, Copper and other Soft Metal,CAN'T Processing Alloy,Brass Rod.Note: The harder the material, the smaller the depth of cut.we offer several shims for you to adjust the height of the turning tool..
  • Note: The machine defaults to use high speed motor. If you need a low speed motor, please contact us.This machine is a micro lathe and cannot achieve high precision. Please check the size of the accessories.Three-jaw chuck clamping diameter: 13mm claw, 45mm reverse claw. If you have requirements for high precision, please consider purchasing....
Check Stock