Categories

Best Aluminum Shift Shaft Bushings

MSD 8528 Ready-to-Run Pro-Billet Distributor

  • Simple and clean installation with only three wires to connect.
  • Powerful built-in module produces a 7.5 amp single spark through high RPM.
  • Easy-to-adjust mechanical advance with supplied springs and stop bushings.
  • Advance plate and weights are fine blanked from chrome chromoly steel and QPQ coated for friction reduction.
  • CNC machined billet aluminum housing and billet aluminum base.
  • Polished steel shaft is QPQ coated and guided by a sealed ball bearing.
  • Maintenance-free magnetic pickup and precision reluctor create stable trigger signals throughout the RPM range.
Check Stock

Southwest Speed New 55-57 Chevy Factory Replacement Nylon BUSHINGS for The Clutch Pedal Cross Shaft TRI-5 1955 1956 1957 150 210 BEL AIR Nomad Sedan DELIVERY DEL RAY

  • Brand New Pair of Southwest Speed Factory Replacement Nylon Bushings for the Clutch Pedal Cross Shaft that fits all 1955-1957 Chevy Passenger Cars....
  • This pair of Southwest Speed nylon bushings mount on each each of the clutch pedal cross shaft sleeve under the dash, and are a reproduction of the....
  • If you are doing a restoration of a 1955-1957 Classic Chevy or just the want the correct part then you have came to the right place > NOTE: This....
  • Features: > 5/8" I.D. > Includes a Pair > Mounts on each end of the cross shaft sleeve under the dash > Factory Reproduction > Nylon Bushings.
  • Applications: > 1955-1957 Chevy Bel Air > 1955-1957 Chevy 150 > 1955-1957 Chevy 210 > 1957 Chevy Del Ray > 1955-1957 Chevy Nomad > 1955-1957 Chevy....
Check Stock

Performance Tool W1157P SAE Clutch Alignment Tool

  • SAE shaft and bushings to fit 8 SAE pilot bearing sizes..
  • Plated aligning cone with graduated 1" and 1 1/8" diameters for "automatic" fit to most clutch plates..
  • W1158P shaft & bushings to fit 10 metric pilot bearing sizes. Tapered cone for all others..
  • Sizes SAE: .590, .612, .624, .668, .749, .786, .808 & .904".
  • Plated aligning cone with graduated diameters for "automatic" fit to most clutch plates..
Check Stock

Gomexus RA600 Two Speed trolling Reel for Tuna Fishing

  • 【Product Name:RA600 Trolling Reel】【Material】aluminum,stainless steel 【Weight】 1.12 lbs 【Bearings】9BB+2RB 【Max Strike】: 70lbs 【2 speed gear ratio】 5.0:1/2.0:1 【Wide Line capacity】: braided 480yds / 80lbs.
  • 【Prerium Material】9 shielded stainless steel ball bearings.All internal components gears and shaft are hardened and tempered stainless steel.RA600 were anodized for a durable and saltwater resistant finish..
  • 【Unique Design】 It has the best smooth shift function with 1 touch 2 speed shift.CNC machine cut aircraft aluminum frame and spool,which makes it an oversized big game reel..
  • 【Perfect drag system】 HT-100 carbon fiber drags utilizing the best aircraft brake material.Max drag 85lbs..
  • GOMEXUS RA600 trolling reel provides a 12-month warranty. Contact us and you will be satisfied in 24 hours..
Check Stock

uxcell Sleeve Bearings 10mm Bore 14mm OD 15mm Length Sintered Iron Self-Lubricating Bushings 12pcs

  • Size - Bore Diameter: 10mm, Outside Diameter: 14mm, Length: 15mm.
  • Material - Sintered Iron. They are self-lubricating, making them maintenance-free. High wear-resistant and corrosion-resistant..
  • Function - The bushings can be used for different purposes, such as positioning, wear and vibration reduction, or to isolate the shaft from special media to increase the life of the shaft..
  • Application - Iron bushings are most for applications with high load and lower speeds. Sleeve bearings are used in a vast variety of industrial equipment..
  • More - They also can be used for reducing bore diameter or replacing worn-out original bushings on wheels..
Check Stock

ATP Bush Bearing and Seal Driver Set 52pc

  • Substantial:Suitable for mounting of bearings, bushings, sealing rings, and rubber (even for use with hydraulic presses).
  • Multile:8-65mm & 74mm Metric Discs, Shaft, Allen Key, Screw can remove or install bushings that are flush with the housing and allows you to build....
  • Contents: Package includes (48) discs from 18mm to 65 (1mm graduation) + (1) 74mm disc + (1) grip handle/shaft + (1) 3mm Allen key + (1) screw + (1)....
Check Stock

MAUREY MFG. H x 7/8\ Split Taper Bushing, H Series, 7/8\ Bore

  • Bushings are split through the flange and taper to provide a true clamp on the shaft that is the equivalent of a shrink fit..
  • Has a set screw over the key to help maintain the bushings position on the shaft until the cap screws are securely tightened..
  • Carbon steel for strength and resistance to wear..
Check Stock

MAUREY MFG. H x 17MM Split Taper Bushing, H Series, 17mm Bore

  • Bushings are split through the flange and taper to provide a true clamp on the shaft that is the equivalent of a shrink fit..
  • Has a set screw over the key to help maintain the bushings position on the shaft until the cap screws are securely tightened..
  • Carbon steel for strength and resistance to wear..
Check Stock

uxcell Bearing Sleeve 8mm Bore x 12mm OD x 15mm Length Self-Lubricating Sintered Bronze Bushings 3pcs

  • Bore: 8mm, Outside Diameter: 12mm, Length: 15mm.
  • Material - Sintered Bronze (copper-tin alloy). They are self-lubricating, making them maintenance-free. High wear-resistant and corrosion-resistant..
  • Function - The bushings can be used for different purposes, such as positioning, wear and vibration reduction, or to isolate the shaft from special media to increase the life of the shaft..
  • Application - Bronze bushings are most for general-purpose where moderate speeds and loads are present. Sleeve bearings are used in a vast variety of industrial equipment..
  • More - They also can be used for reducing bore diameter or replacing worn-out original bushings on wheels..
Check Stock

uxcell Bearing Sleeve 10mm Bore x 16mm OD x 15mm Length Self-Lubricating Sintered Bronze Bushings 6pcs

  • Bore: 10mm, Outside Diameter: 16mm, Length: 15mm.
  • Material - Sintered Bronze (copper-tin alloy). They are self-lubricating, making them maintenance-free. High wear-resistant and corrosion-resistant..
  • Function - The bushings can be used for different purposes, such as positioning, wear and vibration reduction, or to isolate the shaft from special media to increase the life of the shaft..
  • Application - Bronze bushings are most for general-purpose where moderate speeds and loads are present. Sleeve bearings are used in a vast variety of industrial equipment..
  • More - They also can be used for reducing bore diameter or replacing worn-out original bushings on wheels..
Check Stock

uxcell Bearing Sleeve 6mm Bore x 10mm OD x 6mm Long Self-Lubricating Sintered Bronze Bushings 10pcs

  • Bore: 6mm, Outside Diameter: 10mm, Length: 6mm.
  • Material - Sintered Bronze (copper-tin alloy). They are self-lubricating, making them maintenance-free. High wear-resistant and corrosion-resistant..
  • Function - The bushings can be used for different purposes, such as positioning, wear and vibration reduction, or to isolate the shaft from special media to increase the life of the shaft..
  • Application - Bronze bushings are most for general-purpose where moderate speeds and loads are present. Sleeve bearings are used in a vast variety of industrial equipment..
  • More - They also can be used for reducing bore diameter or replacing worn-out original bushings on wheels..
Check Stock

A-Team Performance - Pro Billet Series - Compatible with CHEVY GMC Chevrolet SBC BBC V8 327 350 396 454 Ready to Run Distributor with Fixed Collar R2R Red Cap

  • Red Pro Billet Series Ready to Run Distributor with Fixed Collar.
  • Compatible with CHEVY GMC Chevrolet SBC BBC V8 327 350 396 454.
  • Made of High Quality Materials — CNC-machine aluminum body, hardened steel shaft, and solid brass terminals Fully Adjustable Mechanical Advance - 4 bushings of varied size that determine the mechanical advance the distributor can achieve.
  • Specifications— Magnetic Trigger Style, Mechanical Advance Type, and External Coil with 35Kv+ Recommended Output.
  • Also Includes — 3 Bushings, 4 Springs Mechanical Advance, Color-Matched Spark Plug Wire Retainer, and Screws.
Check Stock

Southwest Speed New 55-56 Chevy Factory Replacement Clutch Pedal KIT TRI-5 1955 1956 150 210 BEL AIR Nomad Includes Pedal Cross Shaft Sleeve BUSHINGS SPACERS Return Spring Bracket Retainer

  • Brand New Southwest Speed Factory Replacement Clutch Pedal Kit that includes a Clutch Pedal Cross Shaft Sleeve, Two Nylon Bushings, Cross Shaft Steel....
  • This Southwest Speed clutch pedal kit is a reproduction of the original clutch pedal parts used on all 1955-1956 Chevy Passenger Cars with manual....
  • Kit Includes: > Southwest Speed Clutch Pedal Cross Shaft Sleeve (SWS # 650-4658) > Southwest Speed Clutch Pedal Cross Shaft Sleeve Nylon Bushings (SWS....
  • Southwest Speed Clutch Pedal Return Spring Bracket (SWS # 650-4662) > Southwest Speed Clutch Pedal Splined Output Arm (SWS # 650-4664) > Southwest....
  • Applications: > 1955-1956 Chevy Bel Air > 1955-1956 Chevy 150 > 1955-1956 Chevy 210 > 1955-1956 Chevy Nomad > 1955-1956 Chevy Sedan Delivery.
Check Stock