Categories

Best Aluminum Steel Machining Parts

ISCAR QPMR 100404PDN-HQ-M IC28 Carbide Milling Inserts CNC

  • Used mainly for machining aluminum at medium cutting speeds and medium or large chip sections. The inserts usually feature very sharp cutting angles.
  • Super positive square milling inserts for machining aluminum, stainless steel, and high temperature alloys (QUAD2000).
  • ISO Range - P/M/K / ISO Range - N/S/H (N15-N30).
  • Grade or Coating Type: Uncoated / Coating Layers: Uncoated.
Check Stock

Carbide Rough Milling Insert Carbide Inserts for Steel, Stainless Iron and Cast Iron PVD (AlTiN) Coating Carbide Milling Insert/Carbide Inserts APMT1604PDER-H2 APKT1604 for BAP400R Milling Holder

  • Machining: Copper And Aluminum Medium Finish Machining.
  • Allows Faster Machining And Leaves Better Finished on Metal Parts, Reduce the Downtime Required to Change Edges and Easily to be Replaced..
Check Stock

TCI Precision Metals 6061 Aluminum Sheets and Plates Precision Ground Flat and Milled .250' X 12.000' X 18.000' Thick

  • MACHINE-READY BLANKS – Our Standard Sized Machine-Ready Blanks are available in a wide range of pre-configured sizes. Parts are clean and prepped, ready for final machining..
  • GROUND AND MILLED – We do all the hard work so you don't have to. The 6-side line aluminum sheets and plates are precision ground on 2-sides (thickness) to +/-.002” and milled on the length and width to +/-.002”..
  • REDUCES PREP TIME – Aluminum plates arrive clean and ready to go from receiving to machining without prep time. Reduces setup time, scrap, and overall cycle time..
  • VERY VERSATILE – 6061 Aluminum metal plates are very versatile. Can be used in a wide variety of fabrication projects due to its machinability, bending, weldability, and corrosion resistance..
  • PRECISION IS IN OUR NAME – Our blanks are made flat and parallel (as close as .002″) and tighter, and designed to stay that way..
Check Stock

Weltool Flashlight Strike Bezel - 304 Stainless Steel for Maglite C or D cell flashlights LED ML300L & ML300 LX - Upgrade Maglite Glass Breaker

  • Upgrade Stainless Steel Strike Bezel fits Maglite C or D cell flashlights, such as Maglite 2-6 C/D cells led, incandescent, ML300 series. Accurate machining, perfectly fit. ATTENTION: Not Fit ML150, ML125,ML100, ML50, ML25 and Mag Charger series!.
  • Made from an entire steel column with CNC accurate machining, 1.13 times of hardness then 7075 aluminum alloy. It’s much more durable and tougher than aluminum alloy with more impact resistance & corrosion resistance..
  • 6 attack teeth design, fits for self-defense or use to shatter the glass in an emergency..
  • Sandblasting surface, more wear proof than aluminum alloy’s anodizing and it’s adaptive for flashlight bodies with different colors..
  • Package includes: 1 * LB03 Stainless Steel Strike Bezel 1 * Replacement Lens 1 * O-ring 1 * Protection Case for Lens.
Check Stock

Hss Center Drill, High Hardness Angle 60 ° Center Drill, for Industry Drill

  • Each center drill has a double end and with standard milling Angle 60 °.
  • Used for parts that need to be machined between production centers or work piece center holding.
  • Prefabricated precise positioning for hole processing, guide the drill for hole machining, so reducing error, center hole machining for the end surface of the shaft and other parts.
  • The center is used to make tapered holes for the center of the lathe in order to keep the standard twist drill in place so as to prevent the screw from slipping or deviating.
  • These center drill set are made of high speed steel, high hardness and durable in use.
Check Stock

YOYO TOOLS Lathe Turning Tools S08K-SCLCR06 Boring Bar and 5pcs CCMT060204 CCMT2 1.5 Carbide Inserts CNC Lathe Turning Tool S08K-SCLCR06 + 5pcs CCMT060204

  • CCMT060204 CCMT2(1.5) Carbide Inserts : carbide material with CVD coating ,used for machining stainless steel and steel parts.
  • Internal boring bar holder : High quality Steel Durable for Long , strong and durable ,95 degree right hand internal boring bar turning holder, the....
  • Shank Diameter : S08K-SCLCR06: 8mm/0.315'' , Overall Length: 125mm/4.92'' , T8 wrench , M2.5*6 screw , 95 degree right hand internal boring bar....
  • Widely Use: used for Cutting Steel parts and Stainless Steel, simple structure, often used for small hole machining..
  • Package Include : 1Pc S08K-SCLCR06 lathe boring bar with 5pcs CCMT060204 CCMT2(1.5)Carbide Inserts, T8 wrench, M2.5*6 screw.
Check Stock

Acerbis Fuel Tank 3.2 Gallon Black - Fits: Honda CRF450R 2005-2008

  • 1.Inner diameter(thread) is1.93''(49mm),pls measure your tank before ordering.
  • 3.Please measure the outer diameter of your tank opening.
  • 4.Universal parts, will fit most Dirt Bikes, Pit Bikes. Comes with one aluminum Vent Cap.
Check Stock

VAH Gun Scope mounts Cantilever Riflescope Mounts Quick Release 30mm 25.4mm 1 inch Scope Mount Solution Featuring Picatinny Ring Tops

  • All heat treated steel and aluminum construction and Precise machining.
  • All buyer bought this mount. say , It simply works well. If you need a simple 1"25.4mm or 30mm mount with the extra reach for the offset, this is the mount for you..
  • For Scopes with 30mm or 25mm (1 inch ) diameter rings..
  • With six screws on each ring, you really don't have to worry about this thing coming loose. Overall, extremely sturdy and durable. Very good for the price, that's for sure..
Check Stock

MZS Black Motorcycle Brake Clutch Levers Wheel Roller Adjustable Short CNC ME-14330

  • ...your bike before ordering. Be sure to follow the installation instructions (in the box) to check and test before riding..
  • UPGRADE DESIGN - MZS has created a range of brake and clutch different to other motorcycle levers, shape and design of the handle follow ergonomic viewpoints. And modern T6061 CNC Ultra-precision machining techniques are used which ensure a long life of the product and a good visibility of the mechanical engraving logo..
  • WHEEL ROLLER ADJUSTABLE - It added ultra-tight spherical anti-slip parts, and it is covered with the skidproof stripe, prevents the fall off of the chosen adjusters setting and lever position of the during driving. Compared to the dialing point design, the wheel roller design allows for finer adjustment, gives the best clutch or brake response..
  • MZS ADVANTAGE - This touch feel high texture matte finish surface levers can make your fingers feel perfectly on the levers. High quality anodized CNC short levers handle increases durability and hardness, and with beautiful glossy and vibrant finish..
  • HIGH QUALITY COMPONENTS - MZS wheel levers used chrome steel precision sealed bearings, stainless steel pivot and bushing parts, chrome silicon cantilever springs, CNC billet 6061 aluminum and chromoly fasteners..
Check Stock

SÜA - Aluminum E4043 Stick Electrode Rod 3/32\ x 14\ - (1 Lb)

  • ...oval of oxides, the characteristics of the joints are particularly good. Good capillary fluidity..
  • Commonly used on irrigation piping systems, refrigeration equipment, appliances, boat parts, ornamental aluminum parts, aluminum door or window frames, aluminum ladders, tanks, shelves, automotive, trucks or bus parts, machining errors, and building-up missing sections on castings, extrusions, and plates..
  • These Electrodes are 14 inches long and are available in Sizes: 3/32.
Check Stock

JWGJW 120034 Tooling Package Mini Lathe Quick Change Tool Post & Holders Multifid Tool Holder

  • Material: Super-hard Aluminum Alloy.Modeling novelty, compact structure, tool change rapid, good rigidity, high precision machining..
  • This is a mini tool post, and works great on a mini lathe.The use of multiple toolholders form an artificial tool magazine, can repeat replace toolholder.
  • Replace the tool holder high positioning accuracy, reset accuracy within 0.004mm range, the surface quality of machined parts, precision improved..
  • Set includes: 1x Tool Post 1x 3/8" boring holder, 1x 1/2" capacity cut-off blade holder, 2x 1/4-3/8" turning & facing holders, 2x Mounting bolts (M8 & M10), 2x Allen Key.
  • Silver parts are made of aluminum, The black part is made of iron.
Check Stock

1-1/8\ 6061 Aluminum Round Rod 12\ Long Solid T6511 New Lathe Bar Stock

  • 6061 aluminum has excellent corrosion resistance and excellent joining characteristics, easy to machine or weld..
  • 6061 aluminum is an excellent multi-purpose engineering material that will not rust and has a long service life..
  • 6061 aluminum round rod is well finished, the surface is smooth and clean without burrs, no dinks or scratchess..
  • Aluminum rods are widely used in milling or lathe machining, construction and industrial materials, such as the manufacture of marine and automotive parts, railway and so on..
  • The 12" long solid round rod bar is long enough to be cut and applied to different projects..
Check Stock

1-1/2\ 6061 Aluminum Round Rod 12\ Long Solid T6511 New Lathe Bar Stock

  • ✿ 6061 aluminum has excellent corrosion resistance and excellent joining characteristics, easy to machine or weld..
  • ✿ 6061 aluminum is an excellent multi-purpose engineering material that will not rust and has a long service life..
  • ✿ 6061 aluminum round rod is well finished, the surface is smooth and clean without burrs, no dinks or scratchess..
  • ✿ Aluminum rods are widely used in milling or lathe machining, construction and industrial materials, such as the manufacture of marine and automotive parts, railway and so on..
  • ✿ The 12" long solid round rod bar is long enough to be cut and applied to different projects..
Check Stock