21 Rods Aluminum Brazing Rod Low Temperature, Aluminum Welding Rods for Propane Torch, Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair, 1/16\ X 16.93\ (1.6 mm)

  • MATERIAL: 21 Rods 1/16" x 16.93" aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
  • ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
  • PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
  • APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
  • crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
  • SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you ....
Check Stock

Forney 48571 Super Sil Flo Brazing Rod, 1/8-Inch, 1/2-Pound

  • Super Sil-Flo brazing rod is a brazing alloy that is ideal for large and small copper tubing installations.
  • Typical applications are refrigeration control valves, joining copper wires to rotor bars, electrical connections.
  • T joints, wage joints and sleeves, couplings on return bends and condenser fitting.
  • Sil-flo is not recommended for ferrous metals such as iron or steel.
Check Stock

100PCS-Flux Core Welding Wire for Aluminum,Low Temperature Flux Cored Welding Rod Make Repair Aluminum Radiator,Ideal for Both Beginners And Professionals Alike,752°F(400°C) Melting Point.(13"/1.6mm)

  • Simplified welding process: Flux-cored rods have a low melting point and do not require solder powder, making them easy to use even for beginners..
  • High-quality aluminum brazing: The aluminum brazing rods come with flux already included, ensuring a durable and long-lasting bond..
  • Only for Welding Aluminum - 100Pcs(13"/1.6mm)Flux Core Welding Wire are Suitable for Welding or Surfacing Welding Aluminum, Aluminum Alloy, Aluminum-Magnesium Alloy and Other White Metals,752°F(400°C )Melting Point..
  • Flux Cored Aluminum Welding Rod Make Repair Aluminum Radiator Easily: Flux Core Welding Wire is Commonly Used for Repairing Aluminum Radiators in Automobiles, Motorcycles, Air Conditioners, and Refrigerators, Making it A Versatile Tool to Have In Your Toolbox..
Check Stock

Silver Brazing Rod BCuP-5 20 Flat Bar Welding Stick JAgP-15 15% Silver Phos Welding Rods 0.050 x1/8 x14 for Air-conditioners Refrigerators and Freezers

  • Material: The package includes 20PCS 15% Silver Brazing Rods BCuP-3.Silver (Ag) 4.8-5.2%.
  • Copper (Cu): Rest. For the best results..
  • Standard: The BCuP-5 silver brazing rod containing 15% silver, is equivalent to the American standard AWS BCuP-5 national standard BCu88PAg and L205. It has certain plasticity and is suitable for welding of copper and its alloy joints that cannot maintain a tight fit. Melting point 645-815 degrees Celsius..
  • Advantage: The low temperature phosphor silver welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 704-816℃, good fluidity during welding, molten metal can flow to small gaps.
  • Application:The brass brazing rod is used for brazing of silver & silver alloy in motors, air-conditioners, meters, and refrigeration industry,Widely used in brazing of copper and copper alloys in electrical machinery, electrical appliances, glasses and other industries.
  • Service: Fox Alloy Time-proven formulation.
  • A team of experienced welding engineers ready to answer all your welding questions.
Check Stock

Hot Max 23076 1/8-Inch E4043 Aluminum Arc Welding Electrodes, 1#

  • All position rod for all types of aluminum including tubes, sheet, cast and wrought aluminum.
  • E4043 is the highest strength alloy for ARC and gas torch welding.
  • Product can be used with gas torch applications as a brazing alloy.
  • Weight No. 1, Diameter of 1/8" and amperage of 80 to 135.
  • We recommended machine polarity: DCEN (DC-).
Check Stock

US Forge Welding Electrode E6011 3/32-Inch by 14-Inch 5-Pound Box #51123

  • All position rod for all types of aluminum including tubes, sheet, cast and wrought aluminum.
  • E4043 is the highest strength alloy for ARC and gas torch welding.
  • Product can be used with gas torch applications as a brazing alloy.
  • Weight No. 1, Diameter of 1/8" and amperage of 80 to 135.
  • We recommended machine polarity: DCEN (DC-).
Check Stock

50 Pieces Aluminum Welding Rods 0.08 x 8 Inch Universal Low Temperature Welding Cored Wire Brazing Rod Tube for Electric Power, Drill Tap Polish and Paint

  • What you get: each package contains 50 pieces of simple aluminum welding rods, sufficient for welding or surfacing welding alloy with its high strength, good forgeability and corrosion resistance features, giving you the ability to repair more and throw out less.
  • Material and size: made of aluminum material, which has good weldability, high thermal conductivity, high electric conductivity and processing performance, designed with powder core of the inner part for a smooth welding effect.
  • No solder powder needed: aluminum welding rod contains solder powder inside, so you don't need to use other flux powder with aluminum alloy as the welding core and coating as the salt base, convenient and easy to weld.
  • Easy to use: heat the base metal, not the rod, until the temperature of the wire to the operating temperature of 716-752℉ (380-400 ℃), so you can rely on the parent metal heat transfer welding wire to form welds, and waiting for it natural slow cooling after welding.
  • Wide applications: our aluminum brazing rods can be applied to repair most objects that made of aluminum, pot metal, or galvanized steel, also suitable for filling material for pure aluminum, connection with aluminum bus and guide rod of e....
Check Stock

Forney 48300 Bare Brass Gas Brazing Rod, 3/32-Inch-by-18-Inch, 10-Rods

  • Easy flow brazing rod makes it simple to braze aluminum and zinc based metals with an oxygen acetylene or propane torch set up.
  • Great for repairs on irrigation pipes, carburetor bowls, aluminum boats, camper covers, lawn mower housings and casings.
  • Melting point is 1620 degrees Fahrenheit.
Check Stock

100Pcs Flux Core Welding Wire Aluminum Welding Rods 550℃/1022℉ Aluminum Brazing Rods Solution Welding Flux-Cored Rods for Samll Projects (1/16''x13'')

  • ONLY FOR WELDING ALUMINUM - The Aluminum welding flux-cored rods are suitable for welding or surfacing welding aluminum, aluminum alloy, aluminum-magnesium alloy and other white metals with high strength, good forgeability & good corrosion resistance..
  • NO SOLDER POWDER NEEDED - The aluminum brazing rods don't need to use other flux powder while repairing aluminum..
  • HIGH QUALITY MATERIAL - The low temperature aluminum welding rods are made of premium nontoxic, odorless and durable aluminum..
  • APPLICATION - The flux core welding rods are used for welding and filling material for pure aluminum small projects, connection with aluminum bus and guide rod of electrolytic aluminum plant and electric power, chemistry and so on. The melting piont of solution welding flux-cored rods is 550℃(1022℉) ..
  • WARRANTY -- guangfan provide this product have 3-month warranty. If you have any problems with it or questions, please contact us and we will respond in time. We're standing by to assist you all the time. Your satisfaction is our first priority..
Check Stock

Hot Max 24184 Aluminum Brazing Flux for Welding

  • Formulated specifically for torch brazing aluminum.
  • Normally used with 4047, 4043, or 1100 brazing filler alloy.
  • Can also be used for furnace and automatic flame brazing operations.
Check Stock

Fox Alloy 20pcs Copper Brazing Rods BCuP-2 (5/64\) 2mm Phosphor Round Self Fluxing Copper Welding Rods Sticks TIG Arc Pipes for Air Conditioner Refrigerators

  • Material: The package includes 20PCS 2.0mm cooper brazing rods BCuP-2 brass welding rod.
  • Standard: The copper welding rods kit conforms to AWS A5.8.
  • Advantage: The low temperature phosphor copper welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 640-770℃, good fluidity during welding, molten metal can flow to small gaps.
  • Application:The stick TIG welding rods is used for brazing of copper & copper alloy in motors, air-conditioners, meters, and refrigeration industry.
  • Service: Fox Alloy Time-proven formulation.
  • A team of experienced welding engineers ready to answer all your welding questions..
Check Stock

Supplying Demand SW-ALCU5.5 5 Rod Pack Aluminum to Copper or Brass 8 Inch Brazing Rods Appliance Refrigeration HVAC

  • Solution temperature during heat treating must be below the solidus of the braze alloy in order to ensure integrity of the joint is maintained..
  • Joining all brazable grades of aluminum and copper.
  • Aluminum to Aluminum or Aluminum to Copper wire pigtail splices.
  • Aluminum to Copper, Aluminum to Brass or plated terminals.
  • HVAC applications with Brass, Copper, Aluminum and Steel. Is effective with any of these heat sources: Oxy-acetylene torch, Natural gas torch, MAPP Gas, Induction..
  • Quantity per pack: 5 | Rod Length: 8 inches | Shelf Life: 2 years at ambient temp. | Density (Lbs/in³): 0.19 | Recommended Brazing Temp.: 950-1000°F (510-537°C) | Liquidus: 905°F (471°C) | Solidus: 826°F (441°C) | Appearance: Silver-Colored with White Flux Channel.
  • Supplying Demand replacement parts are compatible with Major Brands, but you should always verify compatibility with your specific application..
Check Stock

Heyiarbeit 2mm Carbon Fiber Rod Bar DIY Subject Support Poles for RC Airplane Matte Pole 400mm 15.75 Inch 10pcs

  • 【High Material】-This carbon brazing rod is made of carbon brazing, with a smooth surface and good stability, good acid resistance, heat resistance, salt resistance, corrosion resistance, resistance to certain organic solvents, strong friction and high strength.
  • 【Features】- Light weight, high strength, lighter than aluminum, stronger than steel, are the salient features of carbon fiber rods, better than steel-plastic-wood, anti-aging, very durable, and long service life.
  • 【Advantages】- This carbon brazing rod is far superior to other metals in the field of corrosion, so it has good water resistance and aging resistance in corrosive environments, and is a good helper in corrosion-resistant environments.
  • 【Application】- Carbon fiber rod are suitable for aviation model aircraft, model, multi-rotor support rods, model boats, racing, robots, DIY aircraft production, 3D printers, arrow rods, kites, windmills, sails, DIY subject support poles, mosquito nets, tents, bows, hatches, PCB equipment shafts, luggage, hand rods, as well as helicopters and R/C vehicle.
Check Stock