2Pack Type M Hog Nail Ring Pliers Kit, Multi-function Cage Clamp Hog Ring Pliers with 1200pcs M Clips for Fence Fastening, Bungee Shock, Cords, Animal Pet Cages, Upholstery Installation, Animal Cages

  • 【Type M Nail Ring Pliers】Type M hog nail ring pliers kit is made of manganese steel alloy, high-frequency quenching, strong and durable. Nail is made of zinc-aluminum alloy which has a low carbon steel surface for anti-rust..
  • 【Easy to Use】Building a Wire Cage with a Type M Nail Ring Pliers Makes Your Work Efficient with the Automatic Nailing Design. Just load the M nails and clip the pliers, quickly assemble large pieces of mesh onto birdcages or rabbit cages or even fences..
  • 【What You Will Get】Package comes with 2 sets of type M nail ring pliers with 1200pcs of hog rings zinc aluminum alloy M type nail which has low carbon steel surface for anti-rust..
  • 【Wide Application】This cage clamp hog ring pliers kit is perfect for auto & furniture upholstery, repairing or installing Pet Cages, Gabion, Wire Mesh, Bird Cage, Rabbit Cage, Poultry cages, Chicken Coops, Quail Cages, Fences, Traps, and so much more..
  • 【100% Money Back Guarantee】If you have any queries about the M-type hog ring pliers, you can feel free to contact us, we will try our best to provide you with 100% satisfaction solutions..
Check Stock

TOPINCN Thread Repair Insert Kit Compatible Hand Tool Set for Auto Repairing Thread Master Repair Kit M6 x 1.0 x 8.0mm 25pcs

  • Made of high‑strength, high‑accuracy diamond‑shaped cross‑section steel wire. Wire thread inserts are also called threaded sheaths, stainless steel threaded sleeves, wire sleeves, which is a new type of female threaded fasteners.
  • Used to low‑strength engineering materials such as aluminum alloy, zinc alloy, alloy, copper, plastic, engineering plastics, etc., can significantly improve thread strength and wear resistance.
  • Form a high‑strength, wear‑resistant, high‑accuracy standard female thread when you fit the wire screw set in the screw hole of the workpiece of aluminum alloy and other materials.
  • Wire thread inserts can be used to convert between and inch thread holes, which is convenient and fast.
  • When a thread error occurs or a damaged female threaded hole is repaired, threaded insert can be used as a repair method. Repairing the threaded hole in a cost‑effective manner.
Check Stock

Boeray 2 Sets 2020 Aluminum Extrusion Profile Slot 6mm Door Handle and Frame Hinges Install Kit-4pcs Black Zinc Alloy Hinges 2pcs Aluminum Handles,20pcs T-Nuts 20pcs Hex Screws,2pcs Wrench

  • Material: Hinges-high quality zinc alloy,Handles- high quality aluminum alloy.
  • Include: 2 sets-4pcs Zinc Alloy Hinges,2pcs Black Aluminum Alloy Handles,20pcs T-Nuts, 20pcs Hex Screws,2pcs wrench, more convenient.
  • Mounting Hole Distance: Hinges- 14mm / 0.55", Handle- 90mm / 3.54".
  • Fit:. 2020 Aluminum Extrusion Profile slot 6mm.
  • Widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects.
Check Stock

Adjustable Heavy Duty Aluminium Alloy Cheese Slicer,Slicers With Wire for Soft & Semi-Hard Cheeses,Perfectly for Kitchen Cooking Hand Held Cheese Cutter

  • 【MATERIAL】: The handle is made using a high quality zinc-aluminum alloy and the wire is stainless steel..
  • 【SLICING CHEESE WITH EASE】: This premium quality cheese cutter with wire is made with a zinc-aluminum alloy that provides a sturdy and comfortable handle. Make your craft a lot easier!.
  • 【ADJUSTABLE THICKNESS CHEESE CUTTER】The wire position of the cheese cutter can be adjusted freely for you to adjust the thickness of the slice..
  • 【EASY TO CLEAN THE CHEESE SLICER】: Just wipe the handle with a rag. Dry it off, and it will be like brand new! Please Keep the wire cheese slicer dry after cleaning..
  • 【NO HASSLE, KITCHEN HAPPINESS】Suitable for making different kinds cheeses for cheese platters or sandwiches, this cheese slicer has a thin blade that helps to make a proper and smooth. Great for preparing family dinner or party platter..
Check Stock

IUSELF Pocket Knife Outdoor Hunting Fishing Survival Knife Fixed Blade Knife Pocket Tool Aviation Aluminum Handle

  • Product Dimensions: our pocket knives have an overall length of 9 inches, a blade length of 3.5 inches, a blade width of 0.7 inches and a total weight of 311grams(including package)..
  • Sharp pocket knife: with a hardness of 57RC, it offers razor-sharp cutting performance. The zinc-aluminium alloy handle is robust and durable..
  • Usage Scenarios: Whether at work or at home, camping, hunting, boating, fishing, outdoor work and more, you'll need it..
  • High Quality: stainless steel blades have good toughness, edge retention and wear resistance. The zinc aluminum alloy handle provides you with a secure grip and a comfortable feel..
  • After-sales service: If you have any questions about the product, feel free to contact us..
Check Stock

Rockville PRO-D7 7 Mic Drum Kit w/Bass+Snare+Condenser Overhead Microphones

  • Features of PRO-D7 KIT: Bass Drum Microphone: Steel grill, Aluminum body, Zinc alloy hardware, Fits any mic stands, Anti-wind filter inside the grill, Element: Dynamic, Polar Pattern: Cardioid, Frequency response is engineered to be perfect for kick drums, Studio quality performance make these perfect for recording or live shows, Sounds great even at high SPL levels, Rejection of unwanted noises, XLR Output, Integrated flexible mounting hardware, Large diaphragm delivers accurate low frequencies.
  • Frequency Response: 30Hz - 12KHz, Sensitivity: -58dB 5dB, Output Impendence: 600Ω 30%(at 1kHz), Microphone Length: 4. 72 inches, Microphone Max. Diameter: 2. 01 inches, Microphone Weight: 0. 77 Lbs. Snare Drum Microphone: Steel grill, Aluminum body, Zinc alloy hardware, Fits any mic stands, Anti-wind filter inside the grill, Element: Dynamic, Polar Pattern: Cardioid, Large diaphragm delivers accurate frequency response, Frequency response is engineered to be perfect for tom-toms and snare drums..
  • Studio quality performance make these perfect for recording or live shows, Sounds great even at high SPL levels, Rejection of unwanted noises, XLR Output, Mounting hardware has a ....
Check Stock

Tri-Groove Tamper Proof Security Nuts Zamak 5 Zinc #10-24 - Qty 25

  • Tri Groove Security Nuts are made of Zamak 5 Zinc Alloy (95% Zinc, 4% Aluminum, 1% Copper). Zamak is an alloy of Zinc and Aluminium, sometimes also incorporating Magnesium and Copper..
  • The added copper in Zamak 5 increases the strength, hardness, and corrosion resistance of the alloy, but reduces its ductility and dimensional accuracy compared to other Zamak Alloys..
  • Tri Groove nuts are also referred to as T Groove, Trident Drive and Coned Trident Drive Nuts..
  • May only be installed and remove using tri groove or trident drivers or sockets - Sold Separately.
Check Stock

Tri-Groove Tamper Proof Security Nuts Zamak 5 Zinc #10-24 - QTY 100

  • Tri Groove Security Nuts are made of Zamak 5 Zinc Alloy (95% Zinc, 4% Aluminum, 1% Copper). Zamak is an alloy of Zinc and Aluminium, sometimes also incorporating Magnesium and Copper..
  • The added copper in Zamak 5 increases the strength, hardness, and corrosion resistance of the alloy, but reduces its ductility and dimensional accuracy compared to other Zamak Alloys..
  • Tri Groove nuts are also referred to as T Groove, Trident Drive and Coned Trident Drive Nuts..
  • May only be installed and remove using tri groove or trident drivers or sockets - Sold Separately.
Check Stock

Tri-Groove Tamper Proof Security Nuts Zamak 5 Zinc 1/4\-20 - Qty 25

  • Tri Groove Security Nuts are made of Zamak 5 Zinc Alloy (95% Zinc, 4% Aluminum, 1% Copper). Zamak is an alloy of Zinc and Aluminium, sometimes also incorporating Magnesium and Copper..
  • The added copper in Zamak 5 increases the strength, hardness, and corrosion resistance of the alloy, but reduces its ductility and dimensional accuracy compared to other Zamak Alloys..
  • Tri Groove nuts are also referred to as T Groove, Trident Drive and Coned Trident Drive Nuts..
  • May only be installed and remove using tri groove or trident drivers or sockets - Sold Separately.
Check Stock

Tri-Groove Tamper Proof Security Nuts Zamak 5 Zinc 3/8\-16 - Qty 1

  • Tri Groove Security Nuts are made of Zamak 5 Zinc Alloy (95% Zinc, 4% Aluminum, 1% Copper). Zamak is an alloy of Zinc and Aluminium, sometimes also incorporating Magnesium and Copper..
  • The added copper in Zamak 5 increases the strength, hardness, and corrosion resistance of the alloy, but reduces its ductility and dimensional accuracy compared to other Zamak Alloys..
  • Tri Groove nuts are also referred to as T Groove, Trident Drive and Coned Trident Drive Nuts..
  • May only be installed and remove using tri groove or trident drivers or sockets - Sold Separately.
Check Stock

Tri-Groove Tamper Proof Security Nuts Zamak 5 Zinc 5/16\-18 - Qty 25

  • Tri Groove Security Nuts are made of Zamak 5 Zinc Alloy (95% Zinc, 4% Aluminum, 1% Copper). Zamak is an alloy of Zinc and Aluminium, sometimes also incorporating Magnesium and Copper..
  • The added copper in Zamak 5 increases the strength, hardness, and corrosion resistance of the alloy, but reduces its ductility and dimensional accuracy compared to other Zamak Alloys..
  • Tri Groove nuts are also referred to as T Groove, Trident Drive and Coned Trident Drive Nuts..
  • May only be installed and remove using tri groove or trident drivers or sockets - Sold Separately.
Check Stock

Tri-Groove Tamper Proof Security Nuts Zamak 5 Zinc 5/16\-18 - Qty 100

  • Tri Groove Security Nuts are made of Zamak 5 Zinc Alloy (95% Zinc, 4% Aluminum, 1% Copper). Zamak is an alloy of Zinc and Aluminium, sometimes also incorporating Magnesium and Copper..
  • The added copper in Zamak 5 increases the strength, hardness, and corrosion resistance of the alloy, but reduces its ductility and dimensional accuracy compared to other Zamak Alloys..
  • Tri Groove nuts are also referred to as T Groove, Trident Drive and Coned Trident Drive Nuts..
  • May only be installed and remove using tri groove or trident drivers or sockets - Sold Separately.
Check Stock

Tri-Groove Tamper Proof Security Nuts Zamak 5 Zinc 1/2\-13 - Qty 1

  • Tri Groove Security Nuts are made of Zamak 5 Zinc Alloy (95% Zinc, 4% Aluminum, 1% Copper). Zamak is an alloy of Zinc and Aluminium, sometimes also incorporating Magnesium and Copper..
  • The added copper in Zamak 5 increases the strength, hardness, and corrosion resistance of the alloy, but reduces its ductility and dimensional accuracy compared to other Zamak Alloys..
  • Tri Groove nuts are also referred to as T Groove, Trident Drive and Coned Trident Drive Nuts..
  • May only be installed and remove using tri groove or trident drivers or sockets - Sold Separately.
Check Stock