Best Amber Lens Tail Lights
Partsam 2Pcs Flat Line Double Face Led Turn Signal Lights Amber/Red, Flat-line Round Led Pedestal Lights Fender Mount Stop Turn Tail Lights Clear Lens, Single Mount
- Chrome Plastic 20 LED 12" Double Face Trailer Light Bar with Double Metal Stud Mounts, Approx. 2-1/16" Apart. Overall Length 11-3/4". Overall Width 2-1/4". Pre-wired design and Double Metal Stud Mounts..
- 20 Amber LED / Amber Lens and 20 Red LED / Red Lens. Dual Function Light Bar, Marker Light and Turn Signal: 3 Wires (Hard Wired), White Wire - Ground, Red Wire - Turn, Black Wire - Marker. These are NOT “plug and play” lights..
- This double faced amber/red pedestal LED is commonly used for additional visibility in stop/turn/tail functions in heavy and medium duty trucks..
- Dual-face Led Truck trailer light bars installs on your truck semi trailer fender: Amber light faces the front of trailer and Red light faces the rear of trailer. The placement is versatile..
- DOT compliant for street legal lighting and Fits for Kenworth Peterbilt Freightliner Western Star International Mack Paccar and other Truck lights.
Check StockPartsam Submersible Led Truck Trailer Lights Kit 12V, 2xSquare Led Trailer Light Kits+14.17' Red 3 Light 9 LED ID Light Bar+2xAmber Side Marker w/ Reflex+ 8pcs 2.5' Oval Led Marker Clearance Lights
- Package included: this 12v led trailer lights kit has verything you need, 2Pcs square combination tail lights, 8Pcs Mini Oval side fender marker clearance lights (4Red+4Amber), 1Pc 14.17 Inch Red Clearance 3-Lamp Truck Trailer identification light bar, 2Pcs amber Clearance Lights with Reflex Lens, 25ft wiring harness with 4-flat plug(long enough to reach end of trailer), license plate bracket, mounting hardware. Provides you with great convenience to upgrade your trailer lights at once.
- Multi Functions: Function as running light, stop light, brake light, turn signal light, reverse light, flash light, rear reflex reflector, side marker light, side reflex reflector, license plate illuminator, clearance Light, identification light bar.
- High Btightness: 15 Diodes ( 12 Red+3 Red ) LED Combination stop turn tail side marker light w/reflector-Curb side.
- 19 Diodes ( 12 Red+3 Red+4 White ) LED Combination stop turn tail side marker light w/reflector-Street side with license illuminator.
- Advanced LED combination lights with better heat distribution, brighter and more energy-efficient than halogen bulbs. Guarantees reliable visibility and safety even in inclement weather.
- Waterproof: The square trailer lights kit is completely sealed, it mean no water can enter....
Check StockLED Smoked Lens LED Side Marker Lamps Replacement For S2000 Accord Civic Prelude CRX Fit Amber LED Fender Driver Turn Signal Lights Kits OEM Sidemarker
- ✅Compatible with 1999-2009 Honda S2000, 1985-2010 Honda Accord, 1985-2011 Honda Civic, 1985-2001 Honda Prelude, 1988-1991 Honda CRX, 2007-2010 Honda Fit..
- ✅Function: Upgrade the fender turn signal lights/side marker lights to brighter amber LED lights. Elevates your muscle car's aura and even adds additional safety visibility features..
- ✅Features: Smoked Lens. Amber LED side marker turn signal lights..
- ✅Installation: Directly replace the original tail light,plug and play..
Check StockPartsam 2pc 3" Red/Amber Double Face Chrome Round Pedestal Lights 30 LED Sealed Clear Lens Fender Mount Stop Turn Tail Lights Replacement for Peterbilt/Kenworth/Freightliner Trucks Trailers
- Package includes 2 Pieces round led pedestal turn signal lights Clear Lens. 4.15" Diameter.
- 24 red LEDs and 24 amber LEDs, Miro-Reflex faceted reflector design provides increased light output and a contemporary appearance while maintaining a traditional footprint.
- These are right and left fender mount clearance lights with amber light facing forward and red light facing backwards.
- Perfect lights to mount on your truck or trailer side fenders, bumpers, mirrors or even tool boxes anywhere you'd like to mount it.
- This Dual-face trailer light is hard-wired with three plain wires: White is ground, gray is low brightness and red is high brightness.
- low ampere draw. Clear/Red side serves 3 functions - stop, turn and tail light and Clear/Amber side serves 2 functions - parking and rear turn signal light.
- Applications: This round double faced sealed LED pedestal lights Clear Lens are designed for trucks, towing & boat trailers, RVs, buses, ATVs, utility vehicles, esp....
Check StockCZC AUTO 12V LED Submersible Trailer Tail Light Kit for Under 80 Inch Boat Trailer Marine with 18G Pure Copper Wiring Harness Kit (Exclusive Trailer Light kit)
- CZC AUTO 12V Submersible LED Trailer Light Kit includes 2 combination stop, tail, turn signal lights, two amber LED marker lights ,25-ft wiring harness ,Aluminum license plate bracket instead of plastic license plate for more sturdy, NO bending and Long years lifetime..
- 18 Gauge 100% pure copper wire harness ensure trailer lights LED do good job underwater! All diodes are LED, NOT Any incandescent bulbs! 100% quality inspection before shipping including photometric inspection. The marine LED trailer lights have super high visibility and Longer Lifetime!The waterproof trailer tail lights comply with DOT FMVSS108 certificate approval.
- Excellent waterproof/Submersible lights for Boat trailer. Sonic Welding Sealing Technology ensures sealing solidity of the LED tail lights. Every possible gap is sealed well with marine grade glue, such as wires entrance holes and edge of the lens.
- Application for under 80 Inch width towing vechile,like boat trailer truck snowmobile,etc..
- CZC AUTO, a reliable brand in trailer lights industry, we offer 30-day money-back for any reason, 12-month warranty for quality-related issues. PlEASE NOTE: Any problem in using our Submersible trailer tail lights, simply contact us, your problem will be solved within 24 HOURS.
Check StockCompatible with MSX125 GROM MSX125SF 2016-2020 Rear Tail Tidy Fender Eliminator Bracket License Plate Holder LED Turn Signal Blinker
- ★Condition:100% Brand New,High quality.
- ★Tail Tidy Feature 1:Small, Compact Design,Aluminum plate laser cutting, 3mm 6061 aluminum, anodizing surface, CNC-bending.Three cables(35cm) need to manually connect..
- ★Turn Signals Feature:Unique Style, can catch more people's eyes on the road, makes your motorcycle more fashion.Brings different brand new visual experience,.Made of high quality ABS plastic body and PC lens, durable to use. Comes with 3 wires which support running, braking light and turn signal lights. Less power consumption, 80% less power consumption than ordinary energy-saving lamps of the same brightness..
- ★Turn Signals Feature 2: Usage: Running, Braking light and Turn signal lights,Body Color: Black,Lens Color: Smoke,Front Light Color: Amber Back Color: Amber LED,Working voltage: DC 12V,Mounting Bolt Thread: 10mm,Applicable Models: 12V Motorcycles,Bulb Type: LED, High Lumens Output and Long Life Span,Size: (As photo shown),Length Of Cable:26CM ,wiring: 3 Wires Set Up (Black:Negative;Red:Positive,Amber light.
- Blue:Positive,White Light,you can use for brake light).
- ★compatible with: MSX 125 Gorm 2016-2020 / MSX 125 SF 2016-2020.
Check StockQiilu Auto Lens Repair Kit, 3 Pieces Car Lights Crack Repair Film Multi-Pack Headlight Taillight Repair Tools (Red, Amber, Clear)
- [ Function ] --- This tail light repair tape is designed to repair tail lights, turn signals, and clear lenses crack easily without removing the housing.Simple repair process, just cut and paste. Size: 192 * 95mm..
- [ Precise Design ] --- The repair panel designed with a pre-formed grid pattern, which matches your original lens closely..
- [ 3 Colors Design ] --- Multi-pack repair kit comes with 3 colors, red, amber and clear..
- [ Good Seal Performance ] --- Our tail light lenses tape adopt special adhension will form a weather proof seal, allows to paste on flat or curved surfaces..
- [ Instructions ] --- ①Remove all crack and broken pieces around damaged area②Clean lens around area thoroughly with dry cloth③ Hold panel over damaged area to determine size of lens repair panel. Position the pane allowing 1/2 inch over lap on all sides of damage. if size selected needs to be smaller, trim along the inner grid lines④Peel backing from panel and center over area to be repaired. Press the panel to the lens and run your fingers around the edges to insure a good bond..
Check StockPartsam 2Pcs 17 LED Reflector Double Face Led Watermelon Lights, Amber/Red 3.5" Double Face Round LED Turn Signal Lights 17 Diodes, Chrome Double Face Auxiliary Watermelon Pedestal Lights Amber/Red
- Miro-Reflex faceted reflector design provides increased light output and a contemporary appearance while maintaining a traditional footprint.
- These are right and left fender mount clearance lights with amber light facing forward and red light facing backwards.
- Perfect lights to mount on your truck or trailer side fenders.
- Dual-face trailer light: Clear/Red side serves 3 functions - stop, turn and tail light.
- Clear/Amber side serves 2 functions - parking and rear turn signal light.
- Hard-wired with three plain wires - white wire is ground, which powers both colors (amber, red).
- gray wire is hot, which powers the marker function for both the amber and red sides.
- red wire is turn signal, which powers the turn signal function for both the amber and red sides.
- Of course, the marker and turn signal function can not be used at the same time.
- Applications: This round double faced sealed LED pedesta....
Check Stock4 Way Flat & 7 Way Round Trailer Wiring Tester Light Brake Tail Turn Signal Set
- Kit includes stop, tail and turn signal lights, two amber clearance lights and wiring harness.
- Includes 23 and 4 foot 4-pole color coded wiring harness. Product Type: Lighting and Electrical.
- High visibility LED taillights last longer than standard incandescent lights.
- Side lens are with standard bulb. Corrosion resistant housing. For trailers less than 80 Inch wide.
- Includes 23-foot wiring harness with UV coated jackets.
Check StockKYYET Smoked Lens LED Side Marker Lights Compatible With 2008-2014 Dodge Challenger & 2011-14 Charger (Pack of 4 , 2pcs Front Amber LED & 2pcs Rear Red LED)
- Compatible with 2008-2014 Dodge Challenger and 2011-2014 Dodge Charger (Replace OEM Part # 68039504AA 68039505AA 68043394AA 68043395AA)..
- Driving safety and Boldest looking: Super bright LEDS have a faster on/off response time for driving safety. With the complete smoked lens LED side marker light set..
- Plug & Play: Easy to install,No modification needed, directly snap in and then plug and play..
- Features: Smoke Lens. Built in high power SMD LED with amber yellow LED on the front side marker lights and red LED on the tail rear side marker lights .Brighter than the factory side markers..
- Package Includes: 2pcs amber LED side marker lamps light kits for front and 2pcs Red LED side marker lamps light kits rear/back..
Check StockHTTMT MT036- Tail Brake Light Compatible with 2006-2008 Kawasaki Ninja 650R Ex650 Er-6F Smoke
- This LED integrated tail light is direct replacement of stock tail light.
- You will need to splice the turn signal wires and attach to the taillight.
- Professional installation is recommended.
- Taillight consists of Running, Brake,(red) and Turn Signal Lights (amber),,Quantity: 1,Instructions: No instruction guide,Material: N/A,Light Type: LED,Lens Color: the same like pictures show,,,,.
Check StockTorchbeam 1156 LED Bulb Turn Signal Light Bulbs, CANBUS Error Free, Replace for P21W BA15S 1156A 1156NA 7506 1141, 12V-24V Amber Yellow LED Car Bulb, 2pcs
- ...rs: 1156 led bulb built-in intelligent IC driver for a longer life span & low power consumption, Full aluminum housing with projection lens for maximum Light output and better heat distribution.No more frequent changes improved the driving experience.
- Wide Application: The 1141 amber bulb can be used for Turn Signal Lights, Red Brake Lights, Tail Lights, Side Marker Lights, Corner Lights, Blinker Lights, rear fog lights, etc. Compatible with socket BA15S 1156 1003 P21W 1156A 1156NA 1141 7506 R5W, etc. (NOTE: Installation positions will vary on individual vehicles, please duable check your car user manuel and choose the right bulb's model).
- Note: Extra load resistor is required to avoid the turn signal fast blinking/hyper flash or error code on the dashboard for some vehicles, Please search (B0B2PPZLJS) on amazon and buy it. If any questions about the 1156 bulb, pls reach out to customer care. We’ll happily make things right!.
Check StockTail Light Repair Kit, Duokon 3Pcs Grid Pattern DIY Quick Fix Cracked Broken Tail Light Auto Lens Repair Kit
- [Grid Design]The restoration panel is designed with a pre-formed grid pattern that closely matches the original lens.
- [Three Colors] The multi - piece repair kit comes in three colors: red, amber and clear, for you to choose.
- [Simple Application]The kit is designed to easily repair taillights, turn signals and clear lenses without removing the housing.you can seal damaged rear lights while on holiday or on the road and continue your journey to a manufacturer's workshop.
- [Saving Money] -- When your auto lens are broken,you don't have to spend extra money to buy a new one,just spend a few minutes to cut and paste,practical and economical.
- [Suitable for Many Tail Lights]Suitable for crack repair of taillights, turn signals and transparent lenses. Thisauto lens repair kit isPractical and economical..
Check Stock