Categories

Best Amp Clamp For Automotive Use

OWON Current Clamp Meter Multimeter CP-05+ Clamp Current Probe 200KHz 400A for Oscilloscope 4A 40A 200A 200-400A Test Range with BNC Connector

  • ...l, switch the current clamp on (power LED should light) and then clamp the jaws around the current carrying conductor as shown. Typical Uses The AC/DC Current Probe simply offers the best value for money without compromising resolution..
  • ¡¾Multiple Test Ranges¡¿The OWON CP-05+ current clamp is ideal for use with automotive oscilloscopes for measuring currents between 1 mA and 400 A. Various current test range, 4A, 40A, 200A, 200-400A test range are available.Low noise level, and high detection accuracy..
  • ¡¾Easy to Use¡¿The current clamp has range selection settings, set by a slider switch on the handle of the probe. In use there is no need to break into the circuit or disturb the isolation as the opening jaws simply clamp around the current carrying conductor. No electrical contact is required. These current clamps have been designed for use with oscilloscopes..
  • ¡¾Portable¡¿Special value kit for electrical professional who is looking to add on DC and AC current measurement capabilities to their DMM. Includes a roomy carry case to hold and protect your meter and current clamp, plus extra storage for your AC/DC Current Probe. Auto zero at power on, relative zero correction .Low noise level, and high detection accuracy. 100% money back guarante....
Check Stock

DCT C Clamps for Woodworking Welding Clamps Locking Pliers Set 3-Piece Wood Clamp Set 11in and 6in Swivel Tip

  • LOCK & HOLD YOUR PROJECT: Use the DCT | 3-Piece Hand Tools C Clamp Set to grip your project without slippage.
  • This locking C clamp set includes 1 clamp with regular pads and 2 clamps with swivel pads for damage-free automotive work with auto body panels, most home improvement and repair, woodworking wood joints projects, and some welding applications.
  • 3 CLAMPS, 2 SIZES: 11-inch clamp with swivel pad tips for securing medium to large work, approximate 1-inch (2.5cm) maximum opening, 0.9-inch x 1.1-inch (2.3cm x 2.8cm) flat clamp face size.
  • 6-inch clamp with swivel pad tips for small to medium pieces, approximate 0.7-inch (1.7cm) maximum opening, 0.7-inch x 0.8-inch (1.8cm x 2cm) flat clamp face size.
  • 6-inch clamp with regular tips, approximate 1.3-inch (3.2cm) maximum opening, 0.4-inch x 0.3-inch (0.9cm x 0.7cm) rounded clamp face size.
  • BUILT TO LAST: Constructed from nickel-plated carbon steel for maximum strength and longevity.
  • Hex key adjustment screw for adjusting to the correct pressure.
  • Classic guarded trigger release for maximum locking force and keeps pliers locked securely.
  • Unlike other C-type clamps, these C clamp locking pliers are designed with the handle opposite the clamp to allow access to tight spaces.
Check Stock

Cimeton 304 Stainless Steel Adjustable Clamp Worm Gear Hose Clamps (19Ft Strap + 12 Strong Fasteners)

  • ...ve]: Our hose clamps make it much more cost effective and flexible than ordering a variety of worm clamps. You can make band hose clamps according to your need, such as 10 inch, 12 inch and so on. It also effectively solve the problem of hose leakage and air leakage..
  • [Wide Applications]: It can be widely applied in automotive, industrial, boat, shield, electronic or home applications. It is also perfect for your duct collection dryer vent ductwork, garden fence, segmented wood turning project, pole mount bracket, automotive, stainless strapping, round object securing and hanging..
Check Stock

AstroAI TRMS 6000 Counts Digital Multimeter+ Multimeter Test Leads Kit

  • WIDE APPLICATIONS: This AstroAI digital multimeter features 6000 counts auto-ranging for accurate measurement of AC/DC Voltage, Current, Resistance, Continuity, Capacitance, Frequency, Diodes and Temperature. This multimeter is a really useful tool for electrician test, household use, automotive, industrial electrical problems.
  • MULTIFUNCTION: Features smart functions, Low battery prompt, Data retention, Max/Min data, Auto Power-Off, Auto-Ranging, Backlight and Flashlight. The LCD screen changes to red while detecting live wires, and the backlight turns orange when measuring high voltage..
  • MULTIMETER TEST LEADS KIT: All 8 pieces with three different connectors help to test various on different occasions, including 2 X alligator clips with removable insulation, 2 X extended range plunger mini-hooks with pass-through banana plugs, 2 X heavy duty test probes, 2 X 42” lead extensions..
  • HEAVY DUTY: It is safer to test CAT III 1000V &CAT IV 600V rated current 10A current, perfectly fitting all kinds of multimeters like digital multimeters, voltmeter, clamp meters and so on..
Check Stock

Universal Negative & Positive Battery Cable Terminals - Automotive Terminal Clamps Connectors - Durable & Adjustable Quick Release Terminal Assortment Kit for Cars & Trucks - Car & Truck Accessories

  • HIGH QUALITY - Our battery terminal clamp connectors are brand new & made with premium quality aluminum. Production Years: 2020-2021. Universal negative & positive battery connector fits cars, trucks, boats & vans, & possess long durability..
  • GOOD PERFORMANCE - Battery terminal has good conductive performance & quick release. Corrosion-resistant aluminum terminals can reduce voltage distortion & transmission loss. Convenient wiring & firm connection. Best choice for your vehicle!.
  • KIT INCLUDES - 1 pair of negative (black) and positive (red) battery cable terminal clamps connectors, sufficient for daily use & replacement. A must-have for drivers: the battery terminal between car's battery & car's ignition system is crucial.
  • IMPORTANT NOTICE - Before installation, please make sure that the battery is in a de-energized state. If the original terminal has deteriorated, please replace it with a new terminal immediately..
  • BEST EXPERIENCE - We are committed to providing customers with premium-quality automotive accessories to suit all their needs. This is why we always use non-toxic materials of the highest quality & produce all goods according to GMP standards..
Check Stock

Upgraded 3-72V Automotive Test Light, Heavy Duty Digital LED Circuit Tester with Voltmeter and Dual Color Polarity Indicate Light, Bidirectional DC Voltage Tester Electric Light Test Pen with Buzzing

  • [3-72 V Wide Testing Range] This professional automotive circuit tester light with 3-72V DC voltage testing range, widely and ideal for checking various vehicles¡ electrical circuits, automotive headlights, taillights, turn signal circuits, faulty sockets, fuse connections, also for testing other 3-72v DC wirings and circuits..
  • [Buzzing Bidirectional Voltage Testing Mode] You can attach the alligator clamp either to negative or positive ground, there are two light emitting diode on the circuit board for polarity indication, red light indicates positive polarity and green light indicates negative polarity, and one sound buzzing for positive and double sound for negative..
  • [Computer Safe Accurate LED Digital Reading] Digital LED voltage display for accurate volt readouts, .1 v resolution ratio with high accuracy. Compared with LCD, clear&visible LED reading display for day and night. LED circuits board with micro current than traditional test lights, more secure and burn-resistant to automotive computer board..
  • [Quality Made & Anti-lost Needle Cover ] Sharp stainless steel probe for piercing wires, also for hard to r....
Check Stock

VCT Xenon Timing Light Automotive Tools Cars Truck Engine Auto Shop DIY Mechanic Tool

  • FEATURES · Xenon Automotive Timing Light · Bright Xenon Bulb Makes Timing Mark · High.
  • CARS & TRUCKS Pro Xenon Automotive Timing Light Tune Up F10 This Item Is Brand New!.
  • Very Easy To Read · Highly Accurate At Any Speed · Clamp-on Inductive Pick-up.
  • Trigger Activated · Dependable Solid State Circuit · Automatic Reverse Polarity & Overload.
  • Protection · 4FT Long Electrical Wire of Clamp · 4FT Long Test Electrical Wire · Work.
  • Use in Shady areas for best use. Light is hard to see in bright light/sun light.
  • Working time to be within 5- 10 minutes, DO NOT USE longer that 10 min at a time, you will over heat the unit causing damage to timing light..
Check Stock

4 Inch Heavy Duty Malleable C Clamps for Woodworking Welding Automotive Carpentry Building 4 Pack

  • 4 Inch C Clamp: Use this set of 4 c clamps for woodworking, metal work, welding, automotive, or furniture manufacturing.
  • Multi-Use: The welding face clamp has a sliding handle that will help reduce hand fatigue while ensuring a strong, secure hold on any wood and metals.
  • Clamping Range: Our c clamp set features a screw and thread design that allows you to freely control the clamping range to your needs.
  • Dimensions: Each 4 inch c clamp measures 8 x 4 x 0.6 inches in length.
  • Reliable Quality: The black c clamps for metal working are made from malleable iron that won’t easily break after long-term use.
Check Stock

kinder Fluff Car Window Shade 4Pack -The Only Certified Car Window Sun Shade for Baby Proven to Block 99.95% UVR - Mom s Choice Gold Award Winning -Car Window Shade for Baby- Car Seat Sun Protection

  • The only car window shades CERTIFIED to block 99.79% of UVA & 99.95% of UVB. SPF100 & UPF 50+.
  • This set contains 2 transparent + 2 semi-transparent car window covers to use according to your need + a storage pouch.
  • Made of 120 GSM,15S Film & a unique clamp, it's the most durable automotive interior sun protection.
  • These foldable baby car window shades are designed to fit any windows. Each car shade is 20"x12".
  • Best as baby shower gift, car accessories for men, women, babies & pet in car, truck, suv, van, bus, airplane..
Check Stock

BTMETER BT-7200APP TRMS 6000 Counts Clamp Multimeter, Digital Clamp-on Ammeter for AC/DC Current Voltage Resistance Capacitor Frequency Continuity Temperature NCV Meter

  • ⚡【Monitoring on Your Phone】Smart clamp-on multi tester BT-7200APP can auto connect to your Android / Apple phones or tablet with ease, allows you viewing logging the data out of the arc flash zone 15m (50 ft) away, and save the measurement for detailed analysis, sharing later..
  • ⚡【AC DC Clamp Amp Voltmeter w/ NCV】This clamp multitester can accurately measure AC/DC Amperage, AC/DC Voltage, Resistance, Frequency or Duty Cycle, Capacitance and also provides Noncontact AC Voltage(NCV) detection, Diode, Continuity Buzzer and Temperature(℃/℉) tests. Easy to use in non-contact ampere measures, troubleshoot electrical problems in , motors, household appliances, HVAC.
  • ⚡【Continuous Data Logging Clamp DMM】This clamp-on meter can displays AC DC amps, volts, ohms, Cap, Hz Temp in Max/Min on the same interface with real-time reading. The curve graph w/ timing will show you the changes of amp volt flow more visually. Also supports adjustable data logging rates for continuous testing/ recording unless the battery is dead or the memory is full..
  • ⚡【Reliable True RMS Voltage Amperage Meter】0.1 amp resolution for 0.1....
Check Stock

Koehler Enterprises KEDIS220 220 Piece Hose Clamp Set in Mountable Rack , Red

  • Wide Applicability : Hose finisher clamp is apply to the flexible hose tube. This is not only a hose clamp, but also a hose connector..
  • Repeatable Use : There is a captive screw on the hose clamp, you can disassemble and install it easily, and can also be reused..
  • Suitable for fuel hose, oil hose, diesel hose, water hose and so on, perfect to apply in automotive..
  • Hex hose finisher can be reused and recycle if you do not want them to stay in the original place..
  • Package Included: 4 x Car Hose Finisher Clamp Adapter.
Check Stock

Stainless Steel Hose Clamp Kit - Heavy Duty Adjustable Worm Gear Clamps - Adjustable Band Clamps for Pipes Fuel Lines Radiator - Metal Strapping Tool in Automotive and Plumbing - Worm Drive Clamp

  • Hose clamps can be used to secure hoses, pipes, and fuel lines in automotive, home, garden, boat, radiator, and air conditioner applications. Hose clamps are available in a variety of sizes and designs to meet your needs..
  • This clamp will prevent pipe leakage and also can fit the hose perfectly and seal it without damaging it. This will keep the hose in good condition and allow it to function properly..
  • These stainless steel hose clamps are installed at the joints of the hose to prevent fluid leakage. The clamps are tightened so that they compress the hose, forming a seal. This seal keeps fluids from escaping..
  • The hose clamp is made of stainless steel for durability and resistance to corrosion. This makes it ideal for use in a wide range of industries, including automotive, marine, and plumbing..
  • The worm gear design of the hose clamp makes it easy to adjust the size of the clamp. The design is such that the worm gear can be tightened or loosened as needed, making it a versatile and convenient tool..
Check Stock

Hose Clamp Stainless Steel DIY 7.9 FT Metal Strapping with Holes + 6 Fasteners Large Adjustable Clamp Worm Gear Hose Clamps Pipe Clamp Band Clamp Air Ducting Clamp for Pipe Automotive Cable Tube

  • ... fine to use outdoors and in coastal areas. Solid and sturdy material ensure the adjustable hose clamps last a long time for use, and can be reused..
  • Powerful Function: The worm drive clamp is torsion-resistant, pressure-resistant, tightly locked, helps to solve the problem of liquid gas leakage. Perfect to apply in automotive, industrial, boat/marine, shield, electronic or home applications..
  • Easy to Use: You just need to attach the fastener into the pipe strap like picture 5, and then loosen or tighten the screw of the hose clip with a screwdriver to adjust the size, attach the hose to the fitting tightly. Perfect to apply in automotive, industrial, boat/marine, shield, electronic or home applications..
Check Stock