Best Amplifier Module Replacement Parts
Logarithmic Amplifier Module ±0.4 DB RSSI Linearity ‑95 DBM Intercede, Sma Female Can Be Used As FSK PSK Demodulation
- 16mA current, 20 mV/dB slope, ‑95 dBm intercede, SMA female, 5MHZ‑500MHZ frequency range, 100 dB gain..
- APPLICATION - Used for received signal strength indicator (RSSI) and phase detection in cellular base stations, radar and other radio transceiver applications..
- Logarithmic output of the logarithmic amplifier module is proportional to the logarithm of the input signal..
- ±0.4 DB RSSI LINEARITY - ±0.4 dB RSSI linearity, RSSI scale does not change with temperature and feed voltage..
- AD8309 AMPLIFIER MODULE - AD8309 amplifier module, with limiting output, can be used as FSK PSK demodulation..
Check StockTaidacent INA114 Instrumentation Amplifier 1000 Times Gain Adjustable Single-Supply Operation Single-Ended/Differential Input
- INA114 is a low-cost, high-precision instrumentation amplifier that only requires an external resistor to set the gain, and the gain range is 1 to 10000..
- the weak signal detection effect is excellent, and can input single-ended signals or differential signals..
- Chip features: Offset voltage 50uV, drift 0.25μV/℃, and high common mode suppression, 115dB when G=1000.
- Module application: bridge amplifier, thermocouple amplifier, RTD sensor amplifier, medical equipment, data acquisition front end.
Check Stock16mA Logarithmic Amplifier Module 100 DB Amplifier Board 5MHZ‑500MHZ SMA Detector Module for FSK PSK Demodulation Signal Reception
- Logarithmic Amplifier Module: Logarithmic output of the logarithmic amplifier module is proportional to the logarithm of the input signal..
- RSSI Linearity: ±0.4 dB RSSI linearity, RSSI scale does not change with temperature and feed voltage..
- Apply to: Used for received signal strength indicator (RSSI) and phase detection in cellular base stations, radar and other radio transceiver applications..
- Specific Parameters: 16mA current, 20 mV/dB slope, ‑95 dBm intercede, SMA female, 5MHZ‑500MHZ frequency range, 100 dB gain. Dynamic Range: 100 dB -78 dBm to +22 dBm (Re 50 O). Total Gain: 100 dB. Bandwidth: 500 MHz. Sleep Current: 003c1mA..
- Founction: AD8309 amplifier module, with limiting output, can be used as FSK PSK demodulation. Input and Output Interface: SMA Female..
Check StockAcrylic Case for InnoMaker AMP Hat HiFi Audio Module Works with Raspberry Pi 4 3B B+
- This Acrylic Case is only for InnoMaker AMP Hat HiFi audio module works with Raspberry Pi 4 3B B+ Pi2..
- About the AMP Hat: InnoMaker HiFi AMP Amplifier Module is a high-quality, highly efficient 25W Class-D power amplifier for the Raspberry Pi 4 3 B+ Pi Zero. It is the ideal choice for small room audio system..
- Get a stereo audio system by mount it onto your Raspberry Pi, only you have to do is connect your loudspeakers to our RPI HiFi AMP HAT module..
- RPI HiFi AMP Module compatible with many Raspberry pi music playback system such as: OSMC / Max2Play / RuneAudio / Volumio / Moode / PiCorePlayer / PiMusicBox / OpenELEC / Debian / Ubuntu etc..
Check StockCJMCU-333 INA333 Human Micro Signal Multifunctional Three op amp Precision Instrumentation Amplifier
- AD620 Instrumentation Amplifier Board Module Voltage Amplifier CNC MCP41010 Gain Adjustment Differential Signal Module.
Check Stock
DC Audio LVL3-M2 12' Level 3 900W/1800W Dual-2-Ohm Car Audio Subwoofer/Sub
- Parameters: DROK audio amplifier board working voltage is DC 8-26V, can be powered by 12V, 24V.
- output power is 15W stereo (24V 8ohm)/ 10W stereo (12V 8 ohm), if connect 4 ohm or 2 ohm speaker, the power will be automatically limited to 15W..
- Artificial Material: this New-designed stereo amplifier module is made of noble black immersion gold circuit board, PAM8620 chip, imported KEMET speaker capacitor, large-capacity filter capacitor for channels. Besides, we customized black copper terminal blocks and gold-plated audio input terminal blocks for this new amplifier module..
- High Performance: the class D power amp module is with high efficiency of over 90%, general harmonic distortion noise is less than 0.2%, low quiescent current and noise suppression..
- Safe Protection: the 2 channel amp board is designed with input reverse connection protection, short circuit protection, over heat protection, overcurrent protection, overvoltage protection, undervoltage protection.
- Additional Function: it is available to connect external mute function (MUTE: High level mute, factory default low level).
- available to add an external Shutdown (SD: the chip will be Shutdown at low electricity level, factory defaults high electricity leve....
Check StockICC/Intervox MEO-627PN-02-643, Condenser Microphone 6.0 X 2.7
- DEPENDABLE TO USE: The Mic sensor sound module is professional manufacturing, voice detection module has high performance, strong reliability, making sure safety use..
- MAIN FUNCTION: This microphone sound detection module can detect sound strength of the environment, with high accuracy, great for professional usage..
- ANALOG OUTPUT: The microphone sensor sound module supports analog voltage signal output, the signal amplitude is VCC/2, stable to use..
- ADJUSATBLE GAIN: The mic sensor voice module has high sensitivity, built in amplifier circuit, and the gain can be adjusted as needed..
- AD COVERSION: The microphone voice detection module can obtain the voltage signal of sound intensity through AD conversion..
Check StockTaidacent OPA541 OP AMP High Power Monolithic Operational Amplifier 5A Current High Voltage Audio Amplifier Sound Amplifier Board
- Name: OPA541 High Voltage High Current Power Amplifier.
- Size: 96mm*64mm*41mm (length, width, height).
- The OPA541 module is a power operational amplifier capable of operating with a power supply up to 40V and providing continuous output current up to....
- Suitable for motor-driven speaker drive, transformer drive and audio amplifier. It can also amplify triangle wave, sine wave and square wave signals..
- The power consumption of the module is large, and the power supply requires a certain margin. It is recommended to use a power supply with a current....
- The output signal is recommended to use the SMA to BNC cable to directly observe the effect of the oscilloscope. Poor contact or poor quality wires....
Check Stock
KEYESTUDIO Starter Kit V2 for Arduino with RJ11 Connector, Great STEM Education Kit for Students, Teachers and Hardware Enthusiast
- Whenever you and your family go for vacations, you may used to get worried about your plants because they need water on regular basis. We develop this Automatic Plant Watering System to solve this problem as plants need water according to the moisture level of soil..
- The kit includes a plus controller, DHT22 temperature and humidity sensor, I2C LCD, push button modules, power amplifier module, DS3231 clock module, non-contact level liquid sensor, motor driver module, capacitive soil humidity sensor, and pump..
- More than 13 well-selected electronic modules and 17 step by step creative tutorials. Full example code is provided and explained and even includes useful software tool..
- Multi-purpose: timing watering mode, and the sensor detection mode that when the soil is dry, Arduino will command the water pump to run(up to 4 plants at once)..
- Our system measures the soil moisture and waters automatically according to it. A audio power amplifier module tells us when the bucket is empty. I2C LCD displays the temperature and humidity..
Check StockTFD Supplies Wholesale Bulk Earbuds Headphones 50 Pack for iPhone, Android, MP3 Player - Black
- With high quality, onboard 2W single channel power amplifier..
- 4 buttons on the board for setting operation..
- Support MP3 format, playing power on automatically, LED indocator light when module is working..
- Mp3 lossless decoders power amplifier Mp3 player module Mp3 decoder board support TF card and USB..
- Support TF Card (mobile phone memory card), U disk playback mode With the speaker terminals without welding..
Check Stock
Audio Amplifier Board, DROK 5W+5W Mini Amplifier Board PAM8406 DC 5V Digital Stereo Power Amp 2.0 Dual Channel Class D Amplify Module for Speaker Sound System DIY
- Parameters: DROK audio amplifier board working voltage is DC 5V, output power is 5W (2Ω 5V)/3W (4Ω 5V) / 1.8W (8Ω 5V). Input method is monaural input..
- Artificial Material: this New-designed mini power amplifier is made of noble black immersion gold circuit board, imported KEMET speaker capacitor, large-capacity filter capacitor for channels. Besides, we customized black copper terminal blocks and gold-plated audio input terminal blocks for this new amplifier module..
- High Performance: the digital amplifier module is with high efficiency of over 90%, general harmonic distortion noise is less than 10%, low quiescent current and noise suppression..
- Safe Protection: the class D dual-channel amp board is designed with input reverse connection protection, short circuit protection, over heat protection.
- Additional Function: it is available to connect amplifier type to choose different function (MODE: high electricity level is Type D, low electricity level is Type AB. Factory defaults high electricity level).
Check Stock
2 Pieces Audio Amplifier Board Pam8406 Mini Amplifier Board Dc 5v, 5w+5w Amplifier Module, Digital Power Module Class D 2.0 Dual Channel Audio Stereo Amplify Board for DIY Sound System
- PAM8406 amplify module: working voltage: DC 5V.
- Output power: 5W (2Ω 5V)/3W (4Ω 5V)/1.8W (8Ω 5V).
- Characteristics: audio amplifier board has an efficiency of over 90%, which will extend the battery life and can be applied to portable applications.
- The PAM8406 provides comprehensive protection against faults with short-circuit protection and thermal protection.
- Reliable quality: PAM8406 amplifier module is made of noble black immersion gold circuit board, compatible with KEMET audio capacitor, filter capacitors with large capacity per channel.
- Pure copper and gold-plated audio input terminals are included.
- Applications: digital power amplifier board is widely applicable to LCD TVs, Mutimedia speakers, AM/FM system and DABs.
- Package contents: you will get 2 pieces of audio amplifier boards, sufficient quantity to meet your various demands.
Check Stock
EC Buying AD620 High Accuracy Low Power Programmable Instrumentation Amplifier Module Voltage Amplifier Module Differential Amplifier Single-Ended/Differential Small Signal/Small Amplifiers Module
- ♥Introduction: The AD620 is a low-cost, high-accuracy instrumentation amplifier that requires only one external resistor to set the gain over a gain range of 1 to 10,000. Ideal for portable (or remote) applications. With high accuracy, low offset voltage, and low offset drift, the AD620 is ideal for precision data acquisition systems such as electronic scales and sensor interfaces. Also features low noise, low input bias current, and low power consumption. The module has a fixed voltage output..
- ♥Basic Features: ✭Module Name AD620 Instrument Programmable Amplifier ✭Module size:50mm * 50mm ✭Module power supply: 5V-24V ✭Module input signal type: single-ended signal or differential signal ✭Module signal input and output range: the input signal range is within 100 microvolts of the power supply, and the output signal range is within the power supply ✭Module bandwidth: AD620: 120KHz (G=100), AD623: 800KHz (G=1), AD620/623 is lower than 50KHz at high gain, and higher than 1MHz at low gain.
- ♥ Other Features: ✭Module gain: When there is no solder slip, the AD620 will zoom by 10 times by default, and the AD623 will zoom by 20 times by default. During welding slip, AD620: G=1+50K/Rg, AD623: G=1+100K/Rg ✭Maximum magnification of the module: ....
Check Stock
