Categories

Best Amr Gas Meter

Surecom SW-102HF 1.5-70MHz V.S.W.R. & Power Meter

  • Certified to all applicable standards of ANSI C12.1.
  • Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
  • Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
  • Up to three sets of CTs per phase can be paralleled per meter.
Check Stock

Electric Meter, KWh Meter, Single Phase 4P LED din Rail Electricity Power Consumption Wattmeter Energy Meter, 10-40A

  • ...ility and easy installation. 35mm standard DIN-rail mounting in accordance with standard DIN EN50022. Six widths (12.5mm modulus) in accordance with DIN43880..
  • 【5+1 LED Digital Display】Standard configuration 5+1(99999.1KWh) digital display. Double color LED of kilowatt meter indicates the power status (green) and the energy pulse signal (red)..
  • 【Easy to Contact】The standard configuration pulse output is passive (polar) and the remote pulse output can be selected as passive (non-polar). KWH meter is easy to contact with various AMR systems and conforms to the standards IEC 62053-31 and DIN43864..
  • 【One-way measurement】One-way measurement of single-phase two - wire active energy consumption. This has nothing to do with the direction of the load current. Comply with IEC 62053-21..
  • 【Two Wiring Methods】The din rail energy meter has direct connection operation, two wiring methods. Standard configuration S type wiring, U type wiring can be selected. Extend the terminal cover to protect the use of the security..
Check Stock

DAE V-75 Vertical Water Meter, 3/4” NPT Couplings, Measuring in Gallons

  • Certified to all applicable standards of ANSI C12.1.
  • Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
  • Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
  • Up to three sets of CTs per phase can be paralleled per meter.
Check Stock

Leviton 1K240-1SW Series 1000 120/240V 100A 1P3W Indoor Kit with 2 Solid Core CTs

  • Certified to all applicable standards of ANSI C12.1.
  • Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
  • Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
  • Up to three sets of CTs per phase can be paralleled per meter.
Check Stock

Leviton 1K240-2SW Series 1000 120/240V 200A 1P3W Indoor Kit with 2 Solid Core CTs

  • Certified to all applicable standards of ANSI C12.1.
  • Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
  • Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
  • Up to three sets of CTs per phase can be paralleled per meter.
Check Stock

GridGear kWH Electric Meter, 208/120/240V, 4W, with 3 200A or Less Solid Core CTs, Surface Mount Kit with Outdoor Enclosure

  • Certified to all applicable standards of ANSI C12.1.
  • Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
  • Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
  • Up to three sets of CTs per phase can be paralleled per meter.
Check Stock

Argon CO2 Flow Meter Regulator with 80 Inches 6.6Ft Gas Hose for TIG MIG Welder 10 to 60 CFH - 0 to 4000PSI Pressure Gauge CGA-580 Inlet Precise Brass Flow Meter

  • [APPLICATIONS] - Our gas pressure regulator/flowmeter can be used with a variety of gas cylinders including argon, helium, nitrogen, and argon/carbon....
  • [CGA580 CONNECTION] - The Flow Meter Regulator is suitable for standard Gas tanks with CGA-580 inlet connection, with a unique filter port design on....
  • [MEASUREMENT UPGRADE] - The 4000PSI gas meter is more widely used than 3500PSI. If you need to measure more corrosive gases, facing some special....
  • [RELIABLE QUALITY] - The body of our gas flow meter is made of high-quality brass to withstand harsh environments and have a longer life. The....
  • [PACKAGED WITH HOSE] - Our argon regulator package comes with a 2m/6.6 Ft hose that will completely protect you from injury in adverse conditions and....
Check Stock

Handheld Carbon Meter, Portable Precision Detector LCD Digital Display Multipurpose Gas Monitor Tester, 0-1000ppm (Battery Not Included)

  • PROFESSIONAL TOOL: The gas detector is a device that detects the presence of CO gases in an area, often as part of a safety system..
  • EASY TO USE: CO meter detects and measures concentration levels of carbon monoxide gas..
  • HANDHELD SIZE: The CO gas meter is compact and lightweight, professional designed to fit comfortable in your hand, easy to carry and operate..
  • POWERFUL FUNCTION: With a wide measuring range 0-1000PPM, LCD digital display, high accuracy sensor..
  • APPLICATION: Carbon monoxide meter is widely used in petroleum, chemical, coal, metallurgy, paper, fire, municipal, telecommunications, food, textile and other industries..
Check Stock

Remanufactured Supercharger Turbocharger Roots Car Auto Kompressor Supercharger Compresspr blower booster Kompressor for 0.8-2.0L AISIN AMR500

  • Mechanical car auto compressor kompressor turbocharger turbine, mini roots supercharger blower booster for 0.8-2.0L AMR500..
  • AMR500 Turbocharger can be reduced 3%-10% in fuel consumption..
  • AMR500 Supercharger can be increased 10% - 30% in engine power..
  • The direction of rotation of the turbocharger is the same as that of the engine..
  • NOTE:Installation Manual Is NOT Included ,Professional Installation Is Highly Recommended.Note that the supercharger is a v pulley (VPK), Before installation, the gear oil must be filled with about 90ml, and the oil type is 85w-90, GL-5..
Check Stock

TBVECHI Turbocharger, Supercharger AMR500 Turbocharger Mini Roots Supercharger Blower Booster 0.8-2.0L

  • ☑【Specification】Car Maker: Universal. Material Type: Steel Aluminum. Type: Supercharger. Displacement: 0.8-2.0L. Lifting power: 10-30% increase in engine power. Fitment Type: Direct Replacement..
  • ☑【Wide Usage】This is a universal supercharger, any model, 2.0 and below displacement, as long as there is space to install..
  • ☑【AMR500 Turbocharger】Mechanical car auto compressor kompressor turbocharger turbine mini roots supercharger blower booster for 0.8-2.0L AMR500..
  • ☑【Package Includes】1 X AMR500 Turbocharger..
  • ☑【Guaranteed】This item will ship from USA, delivery time need about 5-8 days. If there is any questions please feel free to contact with us, email the contact information that comes with the package, our experienced TBVECHI customer service team will response in 24 hours. You Deserve the Best After-sales Service..
Check Stock

Argon/CO2 Flow Meter Gas Regulator Compatible with Mig Tig Welder Regulator with 6.6FT Gas Hose 10 to 60 CFH Output Flow 0 to 4000 PSI - CGA-580 Inlet argon flow gauge welding regulator

  • ...rdy and durable, which can withstand harsh environments and have a longer life. Came with 6.6 Ft argon welding gas regulator hose and protective cover are made of impact-resistant composite material for safety and durability.
  • 【Wide Application】Idea choice for CGA 580 Tank Fitting. This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet). So it will screw right into the Argon, Argon/CO2 tanks. IDEAL FOR Miller, Lincoln, Hobart, HTP, and most other welders! Idea choice for MIG TIG welding, cutting ,chemical and electronics industry.
  • 【Accurate Gas Flow Gague】Adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube. 0-4000psi inlet pressure, easy-to-read bottle pressure gauge included, allowing you to view how much gas is left in the tank range 0 to 4000psi. Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. It also comes with a standard 1/4" barbed fitting.
  • 【Good Design】Use economic style flow meter regulator and single stage piston design, combination of regulator and flow meter as one unit, compact lightweight construction, convenient for use. Argon Regulator is a ideal choice for professional TIG/MIG welding applic....
Check Stock

Oxygen Air Flow Meter LZQ-1 1~5LPM Oxygen Carbon Dioxide Measuring Flowmeter Gauge Oxygen Gas Flow Meter

  • HIGH PERFORMANCE: All kinds of gas measurement accuracy is high, suitable for a variety of occasions, you can avoid the trouble caused by the reading error when you measure..
  • PRECISE: The air flow meter is simple, practical and easy to use. The transparent panel type makes the reading simple, convenient and clear..
  • CONVENIENT: Gas flow meter is an instrument for measuring gas rate of flow, which is installed in the pipeline to record the gas flow..
  • Texture of Material: The gauge consists of acrylic, plastic and metal. Lightweight and durable, suitable for long-term use..
Check Stock

1 Pack Blue Gas and Bung Wrench Non Sparking Solid Drum Bung Nut Wrench

  • New Blue Non-Sparking Gas and Bung Nut Wrench - 1 Pack.
  • Works on 15, 30, and 55 Gallon Drums ~ Open/Close emergency gas meter shut off valves.
  • 4-in-1 Multi-Functional Tool - 1. Main Wrench - Opens Fine and Course thread Bungs on 15,30, and 55 Gallon Drums / 2. Back of Wrench - Turns off Gas Meter Shut off valves / 3. Handle - Opens 3/4" bung on smaller barrels.
  • Can be used to open the 3/4" bung on smaller barrels.
  • Fits most barrels and drums on the market today..
Check Stock