Categories

Best Amtrol T 5

DCT 5 Star Knobs Kit 5/16in-18 Threaded Knob, Bolt with Knob, Clamping Knob Jig Knobs T Track Knobs and Bolts 4-Pack

  • TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 5/16-Inch-18 internal thread is required.
  • Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 5/16-inch T-bolts.
  • PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm).
  • T track knob threading has 5/16-inch (7.9mm) diameter and 18 threads per inch (if you turn a nut 18 revolutions it will move 1 inch).
  • Bolts and washers are 5/16”-18 x 1-1/2-inch.
  • Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 5/16-inch bolt heads.
  • EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
  • Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
  • BUILT TO LAST: T knobs package includes ....
Check Stock

TEKTON 1/4 Inch Drive Hex, Torx, Phillips, Slotted, Square Bit Socket Set (42-Piece) | SHB90301

  • Includes 4-pc. 1/4 in. drive slotted bit sockets: 1/8, 3/16, 1/4, 5/16 in..
  • 4-pc. 1/4 in. drive Phillips bit sockets: #0, #1, #2, #3.
  • 10-pc. 1/4 in. drive inch hex bit sockets: 5/64, 3/32, 7/64, 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16 in..
  • 10-pc. 1/4 in. drive metric hex bit sockets: 2, 2.5, 3, 4, 4.5, 5, 5.5, 6, 7, 8 mm.
  • 10-pc. 1/4 in. drive Torx bit sockets: T6, T7, T8, T9, T10, T15, T20, T25, T27, T30.
  • 4-pc. 1/4 in. drive square recess bit sockets: S0, S1, S2, S3.
  • S2 steel bit is press-fit into the socket for a straight, permanent connection that can't loosen over time.
  • Bits tips are machined to precise tolerances for strong engagement with fastener heads.
  • Large, clear die-stamped size marking is easy to read and can’t wear off.
  • Four detent grooves provide a secure connection with the drive tool.
Check Stock

BOXO USA Heavy Duty Toolbox 103 Piece MotoBox Tool Box with Locking System - Black

  • Our New MotoBox has everything you need to make sure your bike is dialed in..
  • Designed for professionals and the weekend warriors, it's the perfect set up to have in the pit or in the back of the truck..
  • 12-Piece 1/4" Metric drive 6-Point socket set (4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm). 7-Piece 3/8" Metric drive 6-Point socket set (15, 16, 17, 18, 19, 20, 21mm). 5-Piece 1/2" Metric drive 6-Point socket set (22, 24, 27, 30, 32mm). 10" Groove joint water pump pliers. 6" Long nose pliers. 7" Heavy-duty diagonal side cutter. 5-1/2" Scissors. 4" Flush cutter. 6-Piece 1/4" Drive screwdriver set (SL3, SL4, SL5.5, SL6.5, PH1 & PH2)..
  • 15-Piece Metric combination wrench set (6, 7, 8, 9, 10, 12, 13, 14, 15, 17, 18, 19, 20, 21, 22, 23, 27mm). 1/4" and 3/8" Drive 90-Tooth ratchet wrenches. 3-Piece 1/4" Drive socket extension bars (2", 4", 7" lengths). 2-Piece 3/8" Drive socket extension bar (4", 7" lengths). 1/2" Drive socket extension (3" length). 1/4" Drive Universal joint. 3/8" Drive to 1/4" Drive adapter. 3/8" Drive to 1/2" Drive adapter. 1/2" Drive Swivel handle (15" length)..
  • 7-Piece ¼” Drive hex bit and torx sockets (H3, H4, H5, H6, T15, T20, T25). 11-Piece 3/8" drive hex bit and torx sockets (H5, H8, H9, H10, H12, T27, T30, T40, T45, T50, T55). 2-....
Check Stock

Hyper Tough 52-Piece T-HANDLE RATCHETING SCREWDRIVER SOCKET & BIT SET T-Handle Ratchet Screwdriver Adjustable Extension Bar Bit Adapter

  • 18 - 1/4-in Dr. Sockets: SAE: 5/32, 3/16, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16 & 1/2-in. METRIC: 5, 6, 7, 8, 9, 10, 11, 12 & 13 mm.
  • 31 - 1-in Screwdriver Bits: Slotted: 3, 4(2), 5(2) & 6 mm Phillips: #0, #1(2), #2(2) & #3 Star: T10, T15, T20, T25, T27, T30, T35 & T40 Square: S0,....
Check Stock

SATA 60-Piece 3/8 Inch Drive Standard and Deep Socket and Bit Socket Set with 72T Ratchet, Metric - ST09004U-02

  • [VERSATILE SET] 18 - 3/8" 6pt Metric Sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24 mm, 11 - 3/8" 6pt Metric Deep Sockets 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm, 3 - 3/8" DR Bit socket FD 5.5, 6.5, 8mm.
  • PH #3, 7 - 3/8" DR Bit socket Hex 3, 4, 5, 6, 7, 8, 10 mm, 9 - 3/8" DR Bit Socket Torx T10, T15, T20, T25, T30, T40, T45, T50, T55, 5 Accessories -2 - 3/8" - Spark plug socket 16mm.
  • 21mm, 3/8" - Universal joint, 3/8" Quick Release Ratchet, 1/2" F x 3/8" M 3-Way Adapter.
  • [MULTI-FUNCTIONAL] 24 Bit Sockets in 4 different types to cover many applications.
  • [EASE OF USE] Low profile quick released ratchet requires as little as 5° of swing arc to move a fastener.
  • [PREVENT FASTENER DAMAGE] Sockets Feature Off-Corner Loading to Reduce Fastener Rounding.
  • [ACCESS] Universal Joint for Better Access to Hard to Reach Fasteners.
Check Stock

Rosewill Tool Kit RTK-146 Computer Tool Kits for Network & PC Repair Kits Wire Stripper Soldering Iron Flashlight ESD Strap Nose Pliers Phillips Screwdriver Knife Hex Bits Torq Bits Star Bits

  • STAR BITS: T8H, T10H, T15H, T20H, T25H, T27H, T30H, T35H, T40H.
  • Hex key bits: 5/32", 9/64", 1/8", 7/64", 3/32", 5/64".
Check Stock

Hyper Tough 9-Piece Acetate Handle Screwdriver Set

  • Ratchet Screwdriver, Magnetic Holder, Precision Bit Holder, Precision Bit Driver, Bit Adapter.
  • 31 - 1-in Screwdriver Bits: Slotted: 3, 4(2), 5(2) & 6 mm Phillips: #0, #1(2), #2(2) & #3 Star: T10, T15, T20, T25, T27, T30, T35 & T40 Square: S0, S1, S2 & S3 Hex: 1, 3, 5 & 6 mm PZ: #1, #2 & #3.
  • 20 - Precision Bits Slotted: 1, 1.5, 2, 2.5, 3 & 3.5 mm Phillips: #000, #00, #0(2) & #1(2) PZ: #0(2) & #1(2) Star: T7, T8, T9 & T10.
  • 9 - 1/4-in Dr. Sockets: SAE: 1/4, 9/32, 5/16, 11/32, 3/8, 7/16 & 1/2-in. METRIC: 10 & 13 mm.
Check Stock

Amazon Brand - Denali 80-Piece 3/8-Inch Drive Impact Socket Set, SAE/Metric Size, Includes Star and Inverted Star with Carrying Case

  • 80-piece 3/8 inch drive impact socket set with heavy-duty storage case.
  • High strength chrome molybdenum alloy steel (Cr-Mo).
  • Black phosphate corrosion-resistant finish with laser-etched markings for easy identification.
  • Includes 8 shallow SAE sockets (5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, and 3/4 inch), 8 deep SAE sockets (5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16 and 3/4 inch), 12 shallow metric sockets (8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, and 19mm), 12 deep metric sockets (8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, and 19mm), 10 universal metric sockets (10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, and 19mm inches).
  • Includes 9 inverted star sockets (E5, E6, E7, E8, E10, E11, E12, E14, E16), 9 star sockets (T20, T25, T27, T30, T40, T45, T47, T50, T55), 1 universal joint, and 4 extension bars (3, 5, 10, and 15 inch), 7 universal SAE sockets (3/8, 7/16, 1/2, 9/16, 5/8, 11/16, and 3/4 inch).
  • The product is covered by the Hand Tool Limited Lifetime Warranty.
Check Stock

5 things you should know about my Husband T-shirt husb Gifts T-Shirt

  • 5 things you should know about my Husband T-shirt husb Gifts, 5 things you should know about my Husband T-shirt, 5 things Husband T-shirt, 5 things you should know Husband T-shirt, things, know,day, sunflower, mom, mother, birthday, thanksgiving, mothers.
  • 5 things you should know about my Husband T-shirt, things, know,day, sunflower, mom, mother,christmas, cousin, mommy, auntie, perfect, funny, mother's, kids, gigi, women, family, elephant, womens, party, lovers, nana, gifts, mimi, aunt, great, summer, coo.
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock

USA Standard Gear (ZBKF8.8) Bearing Kit for Ford 8.8 Differential

  • Replacement T-5 bearing retainer with steel throw-out bearing sleeve....
  • Fits production and Ford Racing T-5 transmissionsSmoother clutch engagement can be yours with one of these Ford Racing T-5 bearing retainers. The steel bearing sleeve and aluminum mounting flange reduce flex for more consistent....
Check Stock

Hyper Tough 27 Pieces Home Repair Tool Kit Including Pliers, Hex Keys and More

  • Ratchet Screwdriver, Magnetic Holder, Precision Bit Holder, Precision Bit Driver, Bit Adapter.
  • 31 - 1-in Screwdriver Bits: Slotted: 3, 4(2), 5(2) & 6 mm Phillips: #0, #1(2), #2(2) & #3 Star: T10, T15, T20, T25, T27, T30, T35 & T40 Square: S0, S1, S2 & S3 Hex: 1, 3, 5 & 6 mm PZ: #1, #2 & #3.
  • 20 - Precision Bits Slotted: 1, 1.5, 2, 2.5, 3 & 3.5 mm Phillips: #000, #00, #0(2) & #1(2) PZ: #0(2) & #1(2) Star: T7, T8, T9 & T10.
  • 9 - 1/4-in Dr. Sockets: SAE: 1/4, 9/32, 5/16, 11/32, 3/8, 7/16 & 1/2-in. METRIC: 10 & 13 mm.
Check Stock

Hyper Tough AUTO-LOADING RETRACTABLE UTILITY KNIFE + 3-BLADES || QUICK-CHANGE BLADE REPLACEMENT

  • 9 - 1/4-in Dr. Sockets: SAE: 1/4, 9/32, 5/16, 11/32, 3/8, 7/16 & 1/2-in. METRIC: 10 & 14 mm.
  • 26 - 1-in Screwdriver Bits: Slotted: 1/8, 5/32, 3/16 & 1/4-in Phillips: #0, #1, #2 & #3.
  • Star: T10, T15, T20, T25, T27, T30, T35 & T40 Square: S0, S1, S2 & S3 Hex: 1/8, 5/32, 3/16 & 1/4-in Pz: #1 & #2.
Check Stock

Jameson JT-KT-02667 1000V T-Handle Hex Key Insulated Tool Kit, Imperial, 6-piece

  • 【Excellent Quality Hex Key Tool Set】Manufactured from Hardened and Heat Treated Chrome Vanadium Steel, Hardness, durable, anti-corrosion, anti-rust, for a long service time. Inch /Metric /Star Long Arm Hex Key Set, Made of Chrome-vanadium Steel for Rugged Strength, Durable for Long Time Use, Extra Long Arm Design Increases Reach and Leverage, Meets Most Electrical Needs, A Good Helper for Your Repair Work.
  • 【Torque Handle】With Comfortable Torque Handle for Adding Force when Loading or Unloading the Fasteners, Helps to Tighten or Loosen Fasteners More Quickly and Easily.
  • 【Spherical Ball Head Design】 Allows Turning of Hard to Reach Fasteners up to 25 Degrees, Black Oxide Finish for Protection Against Corrosion, Sand Blasted for a Smooth Surface.
  • 【Widely Used】The Wrenches Set Has Clear Visible Size Mark for Fast Size Selection, Good for DIY Repairs Of Electronics, Bikes, Electrical Work, Machinery, Automobile and Motorcycle.
  • 【27 Pieces Hex Key Tool】Metric (9 PCs): 1.5, 2, 2.5, 3,4, 5, 6, 8, 10mm.
  • Inch (9 PCs): 1/16 5/64 3/32 1/8 5/32 3/16 7/32 5/16 3/8.
  • STAR Size (9 PCs): T10, T15, T20, T25, T27, T30, T40, T45, T50.
  • Comes with a Storage Bag, Good to Keep All the Set’s Pieces Together.
Check Stock