JIFETOR Oil Pressure Gauge Tester Kit Engine Transmission Fluid Test Tool Set 12PCS, 500psi Automotive Mechanical Automatic Gearbox Line Pressure Meter for Car Truck Motorcycle ATV

  • ENGINE AND TRANSMISSION OIL PRESSURE TEST AND DIAGNOSTIC: This oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The oil pressure gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
  • EASY TO CHECK ENGINE OIL PRESSURE: Remove low oil pressure switch, attach the engine pressure tester with appropriate adapter, start engine to read the pressure on the gauge. Verify vehicle oil pressure is normal or not against manufacturer's recommended readings. Turn off the engine and remove the engine oil pressure tester, replace the low oil pressure switch, then done..
  • FITMENT TYPE: The transmission pressure gauge kit includes 12PCS selectable brass connectors (include the one on hose), very sturdy and durability. These connectors can be connected to the corresponding sizes oil pressure test service port, on most vehicles with gasoline or diesel engine, includes car, motorcycle, ATV, truck and so on..
  • PRESSURE GAUGE AND HOSE: Transmission pressure gauge adopts rubber cover pro....
Check Stock

Oil Pressure Sensor Engine Oil Pressure Switch Sensor, 0 to 10 Bars 1/8 NPT Oil Pressure Sensor Gauge Sender for Diesel Generator

  • EASY INSTALLATION: The engine oil pressure switch sender is compact design for easy portability and storage, easy to install and use.
  • DURABLE: The engine oil pressure switch sensor adopts with top grade aluminium alloy, resistant to high temperature from -25 to 100 degree, can increase service life.
  • PRESSURE RESISTANCE: The oil pressure gauge sensor is resistant to high pressure up to 10 bar, can meet your use.
  • PRACTICAL: The engine oil pressure sensor has 1/8" NPT male thread for connecting to male threaded pipe fittings, very practical in work and life.
  • WIDELY APPLICATIONS: The oil pressure sensor NPT-1/8 has widely applications, which is applicable to water, oil, and gas(no freezing).
Check Stock

AEM 30-3511 Infinity 6/8h Plug in Play Jumper Harness for 2003-2005 Mitsubishi Lancer Evolution / EVO 8 VIII

  • AEM’s Plug & Play harness for Mitsubishi Evo engines includes a Wideband O2 connector, AEMnet connector for communication with other AEMnet enabled devices and an auxiliary connector with a Deutsch DTM 12P connector for adding common aftermarket sensors including fuel pressure, air inlet temperature, MAP, oil temperature and ethanol content sensor..
  • The expansion port also includes a sensor ground, 5v reference, 12v power from relay and high side output for activating a relay or solenoid, a low side output for boost control and analog inputs for mode switch and no-lift shift..
Check Stock

Dakota Digital 65 66 Ford Mustang Customizable Gauges Kit Black HDX-65F-MUS-K

  • Included Analog Gauges: Speedometer, Tachometer, Oil Pressure, Water Temp, Voltmeter, and Fuel Level..
  • Black alloy gauge-face styling, each HDX system allows the user to select their favorite illumination color for the gauge readings and needles, as well as the TFT message center displays..
  • Various Indicators can be displayed in the Digital Message Centers: Turn Signals, High Beam, Check Engine, Parking Brake, Cruise Control, Odometer, Clock, Trip Meter....
  • Necessary sensors included for oil pressure (1/8” NPT), Water Temp (1/8" with bushings for 1/4", 3/8", 1/2” NPT as well 12mm and 16mm for GM & LS applications) and speedometer pulse generator..
  • This aftermarket gauge system is compatible with 1965-66 Ford Mustang. Outfit your Pony interior with an all-new instrument system! A direct fit for original and reproduction bezels, this package brings you six analog gauge-sweeps plus a full color TFT message center. Bezel is NOT included, shown for visual/presentation purposes only..
Check Stock

Dakota Digital 55-56 Chevy Car Customizable Gauge Kit Black Alloy HDX-55C-K

  • Included Analog Gauges: Speedometer, Tachometer, Oil Pressure, Water Temp, Voltmeter, and Fuel Level..
  • Black alloy gauge-face styling, each HDX system allows the user to select their favorite illumination color for the gauge readings and needles, as well as the TFT message center displays..
  • Various Indicators can be displayed in the Digital Message Centers: Turn Signals, High Beam, Check Engine, Parking Brake, Cruise Control, Odometer, Clock, Trip Meter....
  • Necessary sensors included for oil pressure (1/8” NPT), Water Temp (1/8" with bushings for 1/4", 3/8", 1/2” NPT as well 12mm and 16mm for GM & LS applications) and speedometer pulse generator..
  • The HDX-55C-K (black alloy style) is compatible with 1955-56 Chevy Cars. This was one of the first direct-fit applications offered by Dakota Digital, so it was only natural to create an HDX system for the icon. A large TFT display lets you expand upon the six analog gauge readings, all installing in to your stock or reproduction bezel (bezel is not included, shown for demonstration purposes only)..
Check Stock

Genesis 200-Feet In-Line Console

  • The console combines a compact pressure gauge, an easy-to-read depth gauge, and an FS-1.5 compass..
  • Housed in a compact plastic case, the pressure gauge offers readings of 0 to 6,000 psi (0 to 400 bar)..
  • The oil-filled analog depth gauge includes a linear Bourdon tube design for accuracy..
  • Driven to constantly innovate and improve the diving experience, SCUBAPRO builds high-quality equipment for the work, sport, and lifestyle of people whose passion is found below the surface..
  • Features 26-degree-tilt, oil-filled compass.
Check Stock

Dakota Digital 78-88 Chevy Monte Carlo Customizable Gauge Kit Silver Alloy HDX-78C-MC-S

  • Included Analog Gauges: Speedometer, Tachometer, Oil Pressure, Water Temp, Voltmeter, and Fuel Level..
  • Silver Alloy gauge-face styling. Each HDX system allows the user to select their favorite illumination color for the gauge readings and needles, as well as the TFT message center displays..
  • Various Indicators can be displayed in the Digital Message Centers: Turn Signals, High Beam, Check Engine, Parking Brake, Cruise Control, Odometer, Clock, Trip Meter. Necessary sensors included for oil pressure (1/8” NPT), Water Temp (1/8" with bushings for 1/4", 3/8", 1/2” NPT as well 12mm and 16mm for GM & LS applications) and speedometer pulse generator..
  • **This gauge system will NOT fit rectangular sweep-style speedometer cluster.**.
  • HDX-78C-MC-S (silver alloy style) is compatible with 1978-88 Chevrolet G Body cars with the six-round gauge clusters! Not for the sweep-style cluster, this bolt-in package affords six analog readings, stock-location turn signals and a pair of TFT message centers. Use your stock housing, blackout plate and front bezel for a painless upgrad....
Check Stock

WYNNsky Oxygen Sensor Remover Set, Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set, 7 Pieces O2 Sensor Socket Set

  • ...alls vacuum switch with a 7/8’’ hex and some oxygen sensors.
  • 3/8’’ Drive × 7/8’’ × 3-1/8‘’ oxygen sensor socket removes and installs oxygen sensors in domestic and many import vehicles. Slot in socket for wire clearance..
  • 1/2’’ Drive ×1-3/16’’ ×3-1/2’’ vacuum switch socket removes oil pressure sending units on late 80’s to mid 90’s GM models.
  • 1/2’’ Drive ×1-1/16’’ × 3-1/4’’ thermal sensor switch socket removes and installs thermal sensor switch on 1973-1977 CM vehicles.
  • 3/8’’ Drive ×1’’ and 1-1/16’’ ×3’’ remove oil pressure sending units. Deep design fits switches up to 2-5/8’’..
  • 1/2’’ drive ×7/8’’ ×2’’ heated oxygen sensor sockets slot in socket accommodates connectors on heated oxygen sensors.
  • 3/8’’ Drive × 7/8’’ ×1-1/4’’ low profile design for use in tight spaces..
  • This set includes 1-1/16 and 1 in. oil Pressure sending unit socket, 3/8 in. drive, 1-3/16 in. Oil pressure sending unit socket, 1/2 in. drive, 1-1/16 in. thermal sensor switch socket, 1/2 in. drive. 7/8 in. heated oxygen sensor socket, 1/2 in. drive, 7/8 in. low profile offset oxygen sensor socket, 3/8 in. drive, 7/8 in. oxygen sensor socket, 3/8 in. drive, 7/8 in. universal vacuum PVS, TVS....
Check Stock

Qiilu Transmission Oil Pressure Switch 28600-RCL-004 Car Auto Trans Oil Pressure Switch Replacement Fit for Honda Accord for CR-V

  • Scope of Application --- The gearbox oil pressure switch Fits for ACURA RSX 2002-2006, Fits for ACURA TSX 2004-2008, Fits for HONDA ACCORD 2003-2007,....
  • Reference OEM --- This gearbox oil pressure switch replaces the OEM number for reference: 28600-RCL-004. Comply with strict quality control standards.
  • High-quality Materials --- The gearbox hydraulic switch is designed and made of high-quality aluminum and ABS, which is stable and durable, and is a....
  • Easy to Install --- The gearbox oil pressure switch is professionally designed, simple to install, and does not require complicated tools. Can replace....
  • Quality Assurance --- As a professional seller, we provide high quality products and considerate services. Every product must go through strict....
Check Stock

12677836 Oil Pressure Sensor Switch D1846A for Chevrolet/GM Equipment 12616646,12573107, 12562230,12614969, 12569323, 12562230, 12556117, 12559780,8125622300, 8125731070, 8126166460, 1S6713, PS308

  • 【COMPATIBLE VEHICLES NOTE】★★★Buy it with your confidence! ★★please check the description or use the year/make/model drop down bar and interchangeable part numbers to confirm the compatibility before purchase our This Engine Oil Pressure Sensor Switch..
  • 【QUALITY & FEATURES】★★In manufacturing, we utilize a laser etching system to calibrate thick film printed circuits. This provides for high accuracy reading of actual oil pressure in vehicle's engine.★★In construction, we utilize high temperature, polyimide film diaphragms. These provide for exceptional cycle durability & resistance to rupture & oil leakage. ★★★ a robust design with high grade materials to meet the stringent demands of today's service professional to insure it lasts longer..
  • 【EASY INSTALLATION】★★★All engine oil pressure sensor units are tested using automated equipment that activates the switch, checks for leaks & stresses the part to ensure specification compliance, even under the most demanding operating conditions. simple structure, easy to install, plug and play, very convenient.★★★ Only 10 mins less for installation.Save your time and money, check youtube video if you have installation problem..
  • 【REPLACES PART & MODEL】 Replaces# 1267....
Check Stock

SCITOO PS417 25070-CD00A Oil Pressure Sensor Switch Fit 2003-2009 for Nissan 350Z, 2005-2006 for Nissan Altima, 2005-2008 for Nissan Armada, 2004-2009 for Infiniti QX56 Oil Pressure Sending Unit

  • COMPATIBLE VEHICLES - Oil pressure sensor for 2004 2005 2006 2007 2008 2009 for Infiniti QX56, 2003 2004 2005 2006 2007 2008 2009 for Nissan 350Z, 2005 2006 for Nissan Altima, 2005 2006 2007 2008 for Nissan Armada, 2005 2006 2007 2008 2009 for Nissan Frontier, 2009 2010 for Nissan GT-R, 2004 2005 2006 2007 2008 2009 for Nissan Pathfinder, 2009 for Nissan Sentra, 2004 2005 2006 2007 2008 for Nissan Titan, 2005 2006 2007 2008 2009 for Nissan Xterra.
  • ADVANTAGES - The oil pressure switch is reliable in operation, extremely high in air pressure accuracy and long in working life. It effectively solve oil pressure gauge reading is not accurate, oil pressure switch engine light come on and low oil pressure problems..
  • PERFORMANCE - Engineered with high-quality materials to ensure trouble-free performance..
  • MATERIAL - Made of high quality & durable material that meets OE standard.100% new oil pressure sensor, not refurbished or re-manufactured parts..
  • GUARANTEE - One Year Warranty available for our this item.Please check picture, OE part number and fitment information to verify this is the correct one you need before your purchase..
Check Stock

ABN Oxygen 02 Sensor Socket 7-Piece Tool Kit – 22mm (7/8in), 27mm, 29mm – All Vehicle O2 Removal and Installation

  • NO MORE HASSLE: The ABN Oxygen 02 Sensor Socket 7-Piece Tool Kit – 22mm (7/8” Inches), 27mm, 29mm – All Vehicle O2 Removal and Installation is for inspection, removal, and installation of hard-to-reach oxygen sensors, oil pressure switches, oil pressure sending units, thermal sensor switches, vacuum switches, and brake light switches.
  • Each socket is permanently etched with size marking for your convenience.
  • MATCHES YOUR CAR: Universal fit for Audi, BMW, Citroen, Mercedes, Peugeot, Renault, Skoda, Vauxhall/Open (GM), and Volkswagen.
  • Sizes include 22mm (7/8”), 27mm, and 29mm.
  • For both heated and non-heated oxygen sensors.
  • Compatible with 3/8-inch and 1/2-inch ratchet drivers or extensions.
  • Side cutout sections allow the sockets to fit over wiring harness and prevent damage to wires.
  • BUILT TO LAST: Constructed from chrome-vanadium steel (CR-V) for extra strength and longevity.
  • Tools have a light coating of oil to protect them from rusting.
  • EASY STORAGE: Heavy-duty 9” x 2.25” x 8” inch (22.9cm x 5.7cm x 20.3cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
  • CONTENTS: Package includes (1) 29mm pressure/vacuum switch 6pt socket + (1) 22mm (7/8 inch) vacuum switch 6pt socket + (1) 22mm (7/8 inch) v....
Check Stock

SCUBAPRO G2 Console Dive Computer with Quick Release, Black, One Size

  • The console combines a compact pressure gauge, an easy-to-read depth gauge, and an FS-1.5 compass..
  • Housed in a compact plastic case, the pressure gauge offers readings of 0 to 6,000 psi (0 to 400 bar)..
  • The oil-filled analog depth gauge includes a linear Bourdon tube design for accuracy..
  • Driven to constantly innovate and improve the diving experience, SCUBAPRO builds high-quality equipment for the work, sport, and lifestyle of people whose passion is found below the surface..
  • Features 26-degree-tilt, oil-filled compass.
Check Stock