Best Analog Sensor Automotive Sensor
Vibration Switch Sensor Module, Piezoelectric Vibration Tapping Sensor Module Vibration Switch Module 5.0V DC AD/DO
- An analog vibration sensor based on a piezoelectric ceramic sheet is an inverse transformation process that uses piezoelectric ceramics to generate vibration. When the piezoelectric ceramic piece vibrates, an electrical signal is generated..
- Special sensor expansion boards are used in combination, and analog ports can be weakly perceived. Vibrating electrical signals enable interactive work related to vibration, such as electronic drum interactions..
- ADO output: The analog voltage ceramic vibration sensor is connected to the controller analog terminal A0 according to the program. When the vibration degree is different, observing the output value of the serial port can realize the vibration-related in.
- According to the greater the vibration intension, the higher the output voltage, the sensitivity of the vibration amplitude can be adjusted by the potentiometer..
- This product has high sensitivity and can be adjusted to respond with a mouth blow or an output with a hand tap (Low turn sensitivity is low, right turn sensitivity is high)..
Check StockWayinTop 2pcs ACS712 Hall Effect Current Sensor Module 30A Range ACS712 Module + 2pcs Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor for Arduino
- 【Perfect Combination】Using this product can measure both voltage and current, very suitable for DIY electronic design projects..
- 【Current Sensor Module】Chip: ACS712ELC-30A.
- Pin 5V power supply, on-board power indicator.
- The module can measure positive and negative current of 30 amperes, corresponding to analog output of 66mV/A..
- 【Voltage Sensor Module】Voltage input range: DC0-25V.
- DC input connector: Terminal cathode connected to VCC, GND negative pole.
- Output interface: "+" then 5/3.3V, "-" then GND, "s" then the for Arduino AD pins..
- 【Package Included】2 x ACS712 Hall Effect Current Sensor Module + 2 x Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor.
Check StockICC/Intervox MEO-627PN-02-643, Condenser Microphone 6.0 X 2.7
- DEPENDABLE TO USE: The Mic sensor sound module is professional manufacturing, voice detection module has high performance, strong reliability, making sure safety use..
- MAIN FUNCTION: This microphone sound detection module can detect sound strength of the environment, with high accuracy, great for professional usage..
- ANALOG OUTPUT: The microphone sensor sound module supports analog voltage signal output, the signal amplitude is VCC/2, stable to use..
- ADJUSATBLE GAIN: The mic sensor voice module has high sensitivity, built in amplifier circuit, and the gain can be adjusted as needed..
- AD COVERSION: The microphone voice detection module can obtain the voltage signal of sound intensity through AD conversion..
Check StockACS712 Hall Effect Current Sensor Module 5A 20A 30A Range + Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor for Arduino
- 【Perfect Combination】Using this product can measure both voltage and current, very suitable for DIY electronic design projects..
- 【Package Included】1pcs x 30A,1pcs x 20A, 1pcs x 5A ACS712 Current Sensor Module, and 1pcs x Voltage Sensor Module DC0-25V Voltage Tester Terminal....
- 【Current Sensor Module】Chip: ACS712ELC-05A,Measuring range: ±5 amps, corresponding Analog output:185mV/A.--- ACS712ELC-20A,Measuring range:....
- 【Voltage Sensor Module】Voltage input range: DC0-25V.
- 【Pls Note】: ACS712 is based on the principle of Hall detection, please avoid the influence of magnetic field when using it!.
Check StockGlowShift 3in1 Analog 60 PSI Boost Gauge Kit with Digital 2200 F Pyrometer Exhaust Gas Temp EGT & 300 F Temperature Readings - 10 Selectable LED Colors - Black Dial - Clear Lens - 2-3/8' 60mm
- GlowShift 3in1 Diesel Combo Gauge Allows Users to Monitor 3 Vital Engine Components from 1 Unit with an Analog Boost & Blue Digital Exhaust Gas Temperature & Temperature Displays.
- Analog Boost Readings from 0 to 60 PSI – Digital EGT Readings from 200° to 2200°F – Digital Temperature Readings from 68° to 302°F.
- 2-3/8″ (60mm) Diameter Gauge with Black Dial, Clear Lens & Illuminated Red Needle – 10 Solid Color Modes & 2 Color Cycle Modes – 6 Daytime & Nighttime Dimming Modes.
- Boost Gauge Parts: 1/8-27 NPT Pressure Sensor & 8′ Sensor Harness – EGT Gauge Parts: 1/8-27 NPT EGT Probe with 3′ of Wire & 6′ Sensor Harness – Temperature Gauge Parts: 1/8-27 NPT Temp Sensor & 8′ Sensor Harness – 3′ Power Harness, Dashboard Pod, Gauge Visor, Mounting Hardware & Installation Instructions.
- GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check StockColiao 8pcs Microphone Sound Sensor KY-037 High Sensitivity Sound Voice Detection Module with Digital and Analog Output Sensors DIY Kit
- Microphone sensor can be used to detect the sound intensity of ambient,with analog output and threshold level output flip.
- Two outputs: AO, analog output, real-time output voltage signal of the microphone.
- KY-037 high sensitivity sound microphone sensor detection module diy kit, good for PIC AVR.
- Package includes: 8pcs sound detection sensor module.
Check StockINA219 High Side DC Current Sensor Breakout - 26V ±3.2A Max
- 【Mini Split Base Current Transformer】It's the smallest one compared to the similar products (output 100MA).Current Transformer, 100A 100mA AC Current Sensor, Split Core Amp Transformer Sensing Relay, Mini Clip-on Easy to Install CT Without Power Off. current sensor structure sensor.
- 【Professional Use】Current transducer used for energy meter in special.
- AC 220v, 380v power supply can both be applied.plit Core Current Transformer,AC Current Sensor,Output Class Analog Sensor,Working Principle Magnetic Sensor, Useful for Measuring Whole Building Electricity Consumption.current sensing relay isolation.
- 【Good Mechanical Properties】Fully enclosed, good mechanical properties and environmental resistance, strong voltage isolation capability, safety and reliability..
- 【Snap Joint Structure】The diameter of inner hole is 16mm, the accuracy is 0.5 grade, Using snap joint structure, it can be fixed to the cable directly through nylon ties..
- 【Easy to use】When you fix the energy meter, you don't need to cut off the power if you use this product. Split Core Current Transformer Coil Sensor for 100A Amp Energy Meter.ac transformer amp meter amp tester.
Check StockHOTSYSTEM Universal Electronic Air/Fuel Ratio Monitor Meter Gauge Blue Digital LED 2inches 52mm for Car Vehicle Automotive
- Accuracy of analog LED type:Every 0.5%,using BAR type to light up..
- Display range:Digital type is from 20.0% to 10.0%.
- Both of digital type and analog LED type will show the....
- Warning(Red Light):At start, the voltage is lower than 11.0V,the value of AIR/FUEL is lower than 0.8 or higher than 10BAR(lower than 12 or higher than....
- Direct analog:The digital has 20 LED pcs, 10.0%≤Air/Fuel ratio≤12.5%,the LED lights appear green among 6pcs.
- 13.0%≤ratio≤17.5%, the LED lights....
- Easy installation:Our gauge includes electric wire with necessary mounting and installation hardware,no need other sensor, your existing oxygen sensor....
Check StockATP Automotive Oxygen Sensor Socket Set 7PC Socket Set
- 21Pcs Sensor Oil Pressure Sending Unit Socket Set Oxygen Injection Tool Set Remove Oxygen.
- Most comprehensive kit available. Features extended and reinforced socket body removes the most stubborn sensors without rounding them off.
- Automotive 6pt and 12pt sensor sockets set for installing and removing oxygen sensors, injectors and thermal switches.
- 7/8inches Short low Profile O2 Oxygen Sensor Socket, 7/8inches Universal Oxygen Sensor Socket.
- Universal Vacuum Switch PVS, TVS Socket Tool.
Check StockInnovate Motorsports 3884 LC-2 Lambda Oxygen Controller Kit Cable 3 ft Sensor Cable
- LC-2: Complete Lambda Cable Kit (3 ft.). Includes: LC-2 Controller, LSU4.9 Wideband O2 Sensor, 3 Ft. Sensor Cable (Overall length 5 ft.), 1"....
- Ability to calibrate O2 sensor for maximum accuracy.
- Integrated dual-color status LED (Green/Red).
- Two configurable linear 0-5v analog outputs.
- Wideband O Compatible with ALL fuel types.
Check StockInnovate Motorsports (3877) LC-2 Digital Wideband Lambda Controller Kit with Bosch LSU 4.9 O2 Sensor
- Patented DirectDigital Wideband Technology.
- Wideband O2 sensor (Bosch LSU 4.9) is compatible with most fuel types (leaded, unleaded, diesel, methanol, E85, etc).
- Ability to calibrate O2 sensor for maximum accuracy.
- Integrated dual-color status LED (Green/Red).
- Two configurable linear 0-5V analog outputs.
Check StockTSL1401CL Linear Sensor 128X1 Linear CCD Camera Sensor Ultra Wide Angle Lens 120 Degree Black and White Line Tracking Module
- BASIC SPECIFICATIONS: With sensitivity pure tones , field cut and signal output, circuit board output switch (can be directly passed through the microcontroller).
- MULTIPLE OUTPUTS: The linear magnetic sensor switches has signal output indication, single signal output, active low signal output.
- IDEAL CHOICE: This linear magnetic sensor switches is ideal for temperature control, proximity switches, alarm detection or rotate encoders.
- WITH SENSITIVITY: Universal sensor module with potentiometer to adjust the sensitivity of the sensor, provides analog and digital output.
- HIGH COMPATIBILITY: With A3141 chipset, 49E linear effect sensor, LM393 dual differential comparator, potentiometer, 2 LED and 6 resistors, fully compatible with standard microcontrollers.
Check StockCabela's Top Shot Elite Firearm Controller - Xbox 360
- First and Only firearm controller for the Xbox 360 gaming platform.
- Features removable/adjustable stock, a scope with red lens filter and pump action reload.
- Wireless 2.4 GHz technology for flexibility and ease of use, plus functioning twin analog sticks, D-Pad and action buttons. 2 AA batteries also included..
- Includes a sensor similar to the Nintendo Wii sensor bar with a CMOS high sensitivity camera that interacts with sensor bar.
- Supports CRT TVs running at 50/60/100 MHZ plus Plasma, LCD and LED TVs.
Check Stock