Best Anchor Bolt Shim Kit - TopShopReview.com

Anchor & Escutcheon Pool Rail Set, 4-Inch Anchor for 1.90-Inch Outer Diameter Tubing- Two Pack

Convenient pool rail or ladder anchor and escutcheon kit: includes 2 bronze anchors and 2 escutcheon plates.
Escutcheon plates hides the anchor and gives a finished look to a rail.
Bronze anchors are 4″ deep, accommodates 1.90″ diameter rails.
1/2-inch tall and accommodates 1.90″ diameter rails.
Kit is necessary to install a pool rail or ladder on a pool.

Control arm shim is an upper type that is .125 inch thick and a dual mount design for use with 6 inch bolt spacing.
One-piece dual mount shims are also available in various other thicknesses if needed (all sold separately).
Shims allow easy adjustment of caster/camber during front end alignment.

Control arm shim is an upper type that is . 500 inch thick and a dual mount design for use with 6 inch bolt spacing.
One-piece dual mount shims are also available in various other thicknesses if needed (all sold separately).
Shims allow easy adjustment of caster/camber during front end alignment.

Control arm shim is an upper type that is . 750 inch thick and a dual mount design for use with 6 inch bolt spacing.
One-piece dual mount shims are also available in various other thicknesses if needed (all sold separately).
Shims allow easy adjustment of caster/camber during front end alignment.

One-piece dual mount shims are also available in various other thicknesses if needed (all sold separately).
Shims allow easy adjustment of caster/camber during front end alignment.
Control arm shim is an upper type that is . 250 inch thick and a dual mount design for use with 6 inch bolt spacing.

One-piece dual mount shims are also available in various other thicknesses if needed (all sold separately).
Shims allow easy adjustment of caster/camber during front end alignment.
Control arm shim is an upper type that is . 185 inch thick and a dual mount design for use with 6 inch bolt spacing.

FLOAT YOUR ANCHOR OR CRAB TRAP TO THE SURFACE - The AnchorLift Anchor Puller easily floats anchors, crab traps, and lobster pots up to 80 lbs..
EASY-TO-USE ANCHOR RETRIEVAL SYSTEM - Slide the AnchorLift over the anchor line, tie off to a cleat and let the anchor out by holding the sliding bolt in the up position. When anchored toss the AnchorLift with buoy into the water. To raise your anchor motor your boat forward to float the anchor to the surface..
IDEAL FOR ANCHORING IN RIVERS AND LAKES - Use in place of a winch or windlass. Sliding stainless steel bolt grabs line and locks anchor at water's surface. Designed for use with anchor lines 3/8" to 5/8" in diameter..
QUALITY CONSTRUCTION - Made from marine grade nylon with stainless steel at all wear points. For extra heavy-duty use, consider our anodized aluminum AnchorLift Pro model. (Link in description below)..
MADE IN THE USA - The AnchorLift Anchor Puller and Polyform buoy are made in the USA and backed by a limited lifetime warranty..

★【Product Type】: High quality heavy duty molly bolt drive hollow drive wall anchor screws kit..
★【Package】: In this kit, it include 6 size of 4x32mm, 4x60mm, 5x52mm, 5x65mm, 6x52mm, 6x65mm total 42pcs packed in a durable plastic box, convenient for your use and storage..
★【Material】: They are made of high quality zinc plated carbon steel, rust resistance and corrosion resistance, strong and durable enough for you to hanging items..
★【Feature】: Heavy-duty hollow drive wall anchor expansion when installing, providing strong bearing capacity and safety..
★【Application】: Widely used in drywall, hollow block, plaster, tile, perfect for hanging curtain rods, lamps, photo frames, coat racks, power switches..

♛ Product Type: High quality heavy duty molly bolt drive hollow drive wall anchor screws assortment kit..
♛ Package: In this kit, it include 3 size of 1/8SDx35mm, 1/8SDx46mm, 1/8SLDx59mm each for 20pcs, total 60pcs drive wall anchors packed in a durable plastic box, convenient for your use and storage..
♛ Quality: All the anchors are made of high quality zinc plated carbon steel, rust resistance and corrosion resistance, durable enough for you to hanging items..
♛ Feature: Heavy-duty hollow drive wall anchor expansion when installing, providing strong bearing capacity and safety..
♛ Application: Widely used in drywall, hollow block, plaster, tile, perfect for hanging curtain rods, lamps, photo frames, coat racks, power switches..

Quantity of (4) : Squeak Ender Floor Squeak Eliminator Brackets # 2084.
Quickly and permanently eliminate annoying wood floor squeaks.
This kit installs from beneath the floor and works by pulling the loose sub-floor tight to the joist ..
Each Kit Includes (1) 4″ adjustable floor joist bracket, (1) 2″ square floor anchor plate, (1) 1/4-20 x 6 inch carriage bolt, (1) 1/4-20 hex nut, (1) 1/4 washer and (4) #10 x 5/8″ sub-floor wood screws.

Quantity of (6) : Squeak Ender Floor Squeak Eliminator Brackets # 2084.
Quickly and permanently eliminate annoying wood floor squeaks.
This kit installs from beneath the floor and works by pulling the loose sub-floor tight to the joist ..
Each Kit Includes (1) 4" adjustable floor joist bracket, (1) 2" square floor anchor plate, (1) 1/4-20 x 6 inch carriage bolt, (1) 1/4-20 hex nut, (1) 1/4 washer and (4) #10 x 5/8" sub-floor wood screws.

Quantity of (24) : Squeak Ender Floor Squeak Eliminator Brackets # 2084.
Quickly and permanently eliminate annoying wood floor squeaks.
This kit installs from beneath the floor and works by pulling the loose sub-floor tight to the joist ..
Each Kit Includes (1) 4" adjustable floor joist bracket, (1) 2" square floor anchor plate, (1) 1/4-20 x 6 inch carriage bolt, (1) 1/4-20 hex nut, (1) 1/4 washer and (4) #10 x 5/8" sub-floor wood screws.

Quantity of (13) : Squeak Ender Floor Squeak Eliminator Brackets # 2084.
Quickly and permanently eliminate annoying wood floor squeaks.
This kit installs from beneath the floor and works by pulling the loose sub-floor tight to the joist ..
Each Kit Includes (1) 4" adjustable floor joist bracket, (1) 2" square floor anchor plate, (1) 1/4-20 x 6 inch carriage bolt, (1) 1/4-20 hex nut, (1) 1/4 washer and (4) #10 x 5/8" sub-floor wood screws.