Categories

Best Anchor Rode

Lewmar V700 12V Vertical Windlass for 1/4 G4 Chain Fall Safe Gypsy Maximum Pull 700 lbs 316 Stainless Steel Construction IP67 Rated Housing for Powerboats and Sailboats 20 -30 - 2020201176

  • SIMPLIFY ANCHORING— Our windlass moves rode chain, or all chain anchor lines up or down with the touch of a button. The style deck unit is designed to conceal a robust, reliable drive train, worm gearbox and splined shaft for maximum strength and control.
  • EASY TO INSTALL — The Lewmar anchor windlass is quick and easy to install on your deck with our FastFit feature. This can be done by one person and the clamping system aligns the deck unit and motor gearbox for a perfect fit the first time.
  • EVERYTHING YOU NEED — The Lewmar windlass has everything needed for a low-profile, anchoring system. The kit includes a windlass, rocker switch, breaker, two-direction solenoid and a handle for power and sailboats 40'-50' and fits a 1/4" G4 chain.
  • COMPACT & DURABLE —The Lewmar V3 windlass doesn't take up too much room on your boat and stylishly hides the drive train, gearbox and shaft. Constructed with tough stainless steel, our windlass will keep your ropes protected for a long time.
  • TRUSTED BRAND — Our windlass kit is from Lewmar, the premiere equipment supplier- designing, manufacturing and distributing innovative, high-quality control solutions worldwide since 1946. Lewmar offers the highest levels of quality in the industry.
Check Stock

Aenllosi Hard Carrying Case Compatible with Rode Wireless GO II Dual Channel Compact Digital Wireless Microphone System (Black)

  • Features: Case is made of supreme quality, durable EVA, crush resistant, anti-shock, water resistant material provides adequate protection from bumps, scratches and splashes for sale is case only, device and accessories are not included..
  • This Protective case for Rode Microphones Wireless GO II is strong enough to prevent any damages or scratches caused by accidentally bumping, dropping, hard shell is pretty compact and keeps your rode wireless go 2 in good condition, be prepared for hiking, fishing, traveling, camping, etc..
  • There is a spacious elastic mesh pouch on the top of the lid for the Rode Wireless Go II charging cables, spare batteries, and other small emergency kits..
  • Case Only! (devices and accessories are not included) This hard travel case is compatible with rode go 2..
  • Heavy-duty smooth zippers are easy for opening and closing, provides you a great using experience..
Check Stock

Wireless GO II Interview Microphone Handle,Retractable Wireless go Handheld Adapter Compatible with Rode Wireless Go & Rode Microphones Wireless Go 2 - Rode Go 2 Accessories by YOUSHARES （Metal）

  • Professional Design - Metal rode interview go kit handle work with rode wireless go and rode wireless go ii..
  • Excellent Features - This is an awesome addition for the wireless go, turn your wireless go into a handheld make field interviews look even more....
  • Easy to Install - Fixed by the clamping shrapnel that comes with the microphone for Rode, special design never slips.  180° rotate mounting seat to....
  • Perfect Details - Mic holder only 72g with plush pockets lightweight and portable, foam material to provide a comfortable grip experience..
  • Widely Adapted - 1/4”-20 threaded hole at the bottom can be great for standing and walking vlogs in from of a camera on a tripod or for....
Check Stock

Rode VideoMic GO On-Camera Shotgun Microphone and DeadCat Wind Cover Kit

  • Lightweight Design - At only 73gm (2.5oz) it's RODE's lightest on-camera microphone..
  • Integrated Rycote Lyre - Hard wearing and super-effective isolation from bumps and vibration..
  • No Battery necessary - With the camera's plug-in power all you need to do is plug in and GO..
  • Kit Includes: Rode VideoMic GO Shotgun Microphone + Rode Microphones DeadCat GO Artificial Fur Wind Shield for the VideoMic GO + TheImagingWorld Micro....
Check Stock

WS2 Microphone Pop Filter/Windscreen Compatible with Rode NT1-A, Procaster, podcaster, NT2-A,K2, NT1000, NT2000and Broadcaster Microphones by SUNMON

  • 【Compatibility】- It's a professional wind shield that designs for your Rode NT1, NT1A, NT2A, NT1000, NT2000, NTK, K2, and procaster,Podcaster, & Broadcaster microphones perfectly (As Rode WS2 Pop Filter)..
  • 【Professional】- Rode WS2 foam cover improves the recording quality by drastically filter out all unwanted background noises. Keep the Microphone audio sound better and clearer, clean wind-canceling sound..
  • 【Protective】- This windscreen protects the Rode Mic from dust and moisture. Protect your Microphone when its in the bag..
  • 【Material】- The foam cover wind killer's material is extremely soft and elastic is quality. A tight fit and would not come off in use..
  • 【Note】- Package included: 1 x Foam Wind Cover..
Check Stock

YOUSHARES VideoMic Windscreen Filter - Mic Foam Deadcat Cover for Rode VideoMic NTG2 NTG1 and WSVM Microphone

  • Professional Wind shield - Specially designed for Rode VideoMic, NTG2, NTG1 Microphone, it greatly reduces wind noise..
  • Perfect Wind Screen - This wind killer blocks out wind noise，breath noise，plosives and pop to improve the audio quality while indoor recording..
  • Perfect protection - Protecting your Rode Mic from dust and moisture..
  • High quality - The Rode VideoMic foam windscreen's material is durable, extremely soft and elastic is quality..
Check Stock

Rode VideoMic Go Windscreen Deadcat and Foam Cover - Rode GO Mic Camera Microphone, Indoor Outdoor Microphone Wind Muff by YOUSHARES (2 Pack)

  • Perfect Windscreen - Foam and furry wind screen pack fits perfectly on Rode VideoMic Go for indoor and outdoor use..
  • Outdoor Use - Rode VideoMic Go furry dead cat wind jammer minimizes wind noise and Vocal Plosives, perfect for recordings and travel blogs..
  • Indoor Use - Rode VideoMic Go microphone foam covers reduce ambient noise, blocks out plosives, keeps the pops down..
  • Perfect Protection - The VideoMic Go windjammer's material is soft and elastic to protect your microphone all the time..
  • Packing: 1 × Foam Windscreen,1 × Furry Windscreen Muff Cover..
Check Stock

Wireless Charging Case Compatible for Rode Microphones Wireless GO 2 & Rode Microphones Wireless GO

  • 【EXCLUSIVE CUSTOMIZATION】 - The charging case compatible for RODE Microphones Wireless GO/GO 2.This charger box is small and compact,making it easy to charge, storage and carry.It is a good choice of accessories..
  • 【3400MAH CAPACITY】 - Powerful charging station with built-in 3400mAh battery can fully charge up to 7 RODE Wireless Lavalier GO II,the charge box can be fully charged in just 2 hours..
  • 【SIMPLE CHARGING】 - The charging case supports multi-slot charging for up to 3 devices（2TX and 1RX） at the same time. Take the hassle out of charging multiple cables..
  • 【MULTIPROTECT】 - Built-in safety Integrated circuitry with powerful multi-protection features Compatible with Rode Wrieless Go original battery..
  • 【USB OUTPUT PORT】 - External USB port for charging mobile phone or other devices for emergency usage..
Check Stock

Foam Windscreen for Rode Microphones - Pop Filter Reduce Unwanted Recording and Background Noises - Compatible with Rode Podcaster, Procaster, Broadcaster, NT1, NT1A, NT2A, NT1000, NT2000, NTK, K2

  • Pop filter is specially designed to fit Rode line of microphones.
  • Compatible with Rode Podcaster, Procaster, Broadcaster, NT1, NT1A, NT2A, NT1000, NT2000, NTK, K2 (as Rode WS2 pop filter).
  • Protect your mic from saliva and dust damage and can be washed and dried.
  • Easy to get on your mic and can be used upside down.
  • High-quality foam filters out unwanted background noises.
Check Stock

Gator Frameworks Desktop Microphone Stand with Round Weighted Base & Adjustable Height (GFW-MIC-0501)

  • Desktop Microphone Stand with Round Weighted Base & Adjustable Height with Non-Slip, Vibration-Reducing Feet on Base.
  • Fits Most Popular Podcast Mics, Including Shure SM7B, Shure MV7, RODE Procaster, & RODE PodMic Models.
  • Great Mic-Placement Solution for Streaming, Podcasts, Broadcasts, Desktop Recording, Kick Drums, or Low-Profile Speaker Cabinets.
  • Standard Height Adjustment Twist Clutch with Min/Max Height: 9.5”/14.5” (241mm/368mm).
  • Heavy Duty Steel Tubing with Compact 5.88”/149mm Round Cast-Iron Base.
Check Stock

Rode Wireless GO Compact Wireless Microphone System with Transmitter and Receiver, White With Rode Lavalier GO Professional-Grade Wearable Microphone, White

  • Transmitter - Receiver - 2x Fur Windshield - Pouch - 2x USB-A to USB-C Cables - SC2 Cable - Rode 1 Year Limited Warranty - Rode Lavalier GO Professional-Grade Wearable Microphone, White.
  • Up to 7 hours battery life from full charge.
Check Stock

Hi Color Silicone Case for RODE Wireless Go IIRODE Wireless GO 2 Wireless Microphone System Black

  • ✅[Environmental protection and fashion] High-quality silicone, no peculiar smell, no harm to the human body, four colors can be selected to make it....
  • ✅[Comprehensive protection] is very suitable, it can protect the second generation Rode Wireless Go II from accidental fall damage, not only to....
  • ✅[Easy installation] Comprehensive protection, installation and disassembly are very convenient..
  • ✅[Full Access] After installation, all functions can be used.
  • microphone, data interface, audio interface can be used directly..
  • ✅[Disclaimer] does not include Rode Wireless Go II..
Check Stock

RV Water Heater Anode Rod - Magnesium Anode Rod 3/4'' NTP Thread - Tank Corrosion Protection, Camper Element with Suburban Water Heater 232767 & Mor-Flo Water Heater Tanks - 9.25\ Long (2-pack)

  • Compatibility: RV water heater anode rode, 9.25 Long and has 3/4" thread that is compatible with Suburban Water Heater 232767 and Mor-Flo Water Heater Tanks. This magnesium RV anode rode is used to replace the rustic rod of your water heater with a new one..
  • Quality: Magnesium Anode Rod is non-toxic and durable for a longer time period because magnesium construction is soft, not harmful to the human body, and more absorbent than aluminum, steel, and other materials..
  • Extra Protection: High-quality magnesium anode rode absorbs the corrosive particles in hot water, delivers electrons into the tank that prevents the water tank from rusting, and prolongs the life span of your water heater..
  • Installation: The method of installation is simple, we provide plumbers tape to tighten the screws, use the appropriate wrench, 1-1/16th socket tool to replace the anode rod. Turn off the gas, electric supply, and water supply to the heater for your safety..
  • Note: Drain some water from the tank to check for rust, then replace it. Change the anode rod of the water heater every 6-8 month, do not use any oil/solvent while removing the previous anode rod, because it may pollute water..
Check Stock