Categories

Best Anchor U bolt

M8-1.25 x 200mm/7.87\ Stainless Steel Fully Threaded Rod Right Hand Threads with Hex Nut Silver Tone (2 Set)

  • Materia: Stainless Steel, provides great corrosion resistance and antirust ability for a long service life..
  • Package Contents: 2 x Fully Threaded Rod with Hex Nut.
  • Applications : Perfect for anchor bolts, clamps, hangers and U-bolts and many more projects where a metal rod with continuous threading or no head or fashioned tip is required..
Check Stock

CEE 10Pack M8 x 250mm Fully Threaded Rod Stud 304 Stainless Steel 5/16\ x 10\ Long Threaded Screw, Right Hand Threads, M8-1.25 Thread Pitch

  • Material: 304 stainless steel, provides great corrosion resistance and antirust ability for a long service life..
  • Package including 10 pcs Threaded Rod, can be drilled, cut, heated and shaped..
  • Used for assembly fastening, screw into threaded nuts or tapped holes..
  • Applications : Anchor bolts, clamps, hangers and U-bolts and many more projects.
Check Stock

Ironwood Pacific AnchorLift Anchor Puller for River and Lake Anchoring, Floats up to 80 lbs

  • FLOAT YOUR ANCHOR OR CRAB TRAP TO THE SURFACE - The AnchorLift Anchor Puller easily floats anchors, crab traps, and lobster pots up to 80 lbs..
  • EASY-TO-USE ANCHOR RETRIEVAL SYSTEM - Slide the AnchorLift over the anchor line, tie off to a cleat and let the anchor out by holding the sliding bolt in the up position. When anchored toss the AnchorLift with buoy into the water. To raise your anchor motor your boat forward to float the anchor to the surface..
  • IDEAL FOR ANCHORING IN RIVERS AND LAKES - Use in place of a winch or windlass. Sliding stainless steel bolt grabs line and locks anchor at water's surface. Designed for use with anchor lines 3/8" to 5/8" in diameter..
  • QUALITY CONSTRUCTION - Made from marine grade nylon with stainless steel at all wear points. For extra heavy-duty use, consider our anodized aluminum AnchorLift Pro model. (Link in description below)..
  • MADE IN THE USA - The AnchorLift Anchor Puller and Polyform buoy are made in the USA and backed by a limited lifetime warranty..
Check Stock

QUALIHOME Spring Toggle Bolt Assortments Kit - Toggle Drywall Anchors Kit for Hanging Items w/Hollow Walls & Ceilings - 1/8” x 2” 3/16” x 3’’ 1/4” x 3 Sheetrock Anchor for Frames Shelves & More

  • Sturdy Toggle Bolts: Need to hang something heavy on the wall? Spring toggle bolt anchors are what you need! Toggle bolts for drywall As they can support twice as much load in a smaller hole than regular wing anchors, our toggle bolts are the most reliable anchors for plaster, concrete, hollow, drywall, & more.
  • Heavy-Duty Steel Material: Our wall anchors are made of high-quality steel, This sheetrock anchor offers strength, durability, and good resistance to rust and corrosion and great option for picture hanging anchors. Unlike plastic, our steel anchor bolts won't crack when tightened, can support heavier weights, and will retain their stability.
  • Spring Wing Design: The plaster wall anchor’s two-piece fastening system consists of a strong screw and a foldable spring wing toggle. With the wings that open inside the wall, the weight of the fastened object is evenly distributed across a large surface, making  wall anchors for shelves a reliable choice for securing heavy items to walls..
  • Easy To Install: Installing the heavy-duty wall anchors is a breeze! We have included DIY instructions for easily installing sheetrock anchors.
  • no special skills are required. To install, first make a hole using a screwdriver/drill, insert the toggle bolt through ....
Check Stock

Hilitchi 122 Piece Plastic Self Drilling Drywall Hollow-Wall Anchor Molly Bolt Toggle Bolt with Screws Kit

  • This anchor set is perfect for mounting a wide variety of objects in drywall and other surfaces where simple fasteners are impractical..
  • Set includes plastic self drilling hollow-wall anchor, molly bolt, toggle bolt with self-tapping screws.
  • The ribs on the plastic anchors prevent the anchor from turning in the hole during installation.
  • The molly bolts Hollow wall anchors with pointed ends can pierce drywall using just a hammer.
  • These toggle bolts are anchors for use in hollow walls and hollow masonry applications.
Check Stock

M8 x 80mm 304 Stainless Steel Expansion Bolt 10-Pack External Hex Expansion Screw Bolt(10 pcs)

  • 1. Material : Expansion Sleeve Bolts made of 304 Stainless Steel, sturdy and firm , resistant to rust and corrosion..
  • 2. High Quality: Anchor Expansion is suitable for using indoor, outdoor even in humid environment, wear-resisting, anti-corrosion, high rust resistance..
  • 3. Standard size: M8x60mm expansion bolt. M8 Thread Diameter, Total Length 2.4inch, Expansion Tube Diameter 12mm..
  • 4. Easy to Install: Expansion Bolts come with nuts and washers. Concrete anchor and masonry anchor , easy to be mounted..
  • 5. Widely Application: Expansion Bolts is widely used in fence, burglarproof doors and window, home decoration, engineering, canopy and air conditioning rach fixation..
Check Stock

CONFAST 5/8\ Lag Shield Anchor Long (25 per Box)

  • READILY ACCEPTS MACHINE BOLTS-Any coarse threaded bolt can be used.
  • INTERNAL THREADS-Bolt can be removed easily.
  • BOLT EXPANDS ANCHOR-No need for setting tools.
  • CAN BE INSTALLED IN CONCRETE, BRICK OR BLOCK-Versatile anchor for most masonry applications.
Check Stock

Awclub Fully Threaded Rod, M6-1.0 Thread Pitch, 30mm Length 304 Stainless Steel Thread Bar Studs Rods, Right-Hand Threads 20pcs

  • Material: Made of high quality 304 stainless steel, excellent corrosion resistance and rust resistance.
  • All thread: Threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components..
  • Applications: Perfect for anchor bolts, clamps, hangers and U-bolts and many more projects where a metal rod with continuous threading or no head or fashioned tip is required..
  • What you get - 20Pcs x Stainless Steel Threaded Rod. If you have any question about this product, please feel free to contact us !.
Check Stock

Sipery Expansion Bolts 304 Stainless Steel External Hex Nut Expansion Screw Bolts Sleeve Anchor M8x60mm 8Pcs

  • Specification - 8Pcs M8x60mm Expansion Bolts, M8 Thread Diameter, Total Length 2.4inch, Expansion Tube Diameter 12mm..
  • Material - Expansion Sleeve Bolts made of 304 Stainless Steel, sturdy and firm , resistant to rust and corrosion..
  • High Quality - Anchor Expansion is suitable for using indoor, outdoor even in humid environment, wear-resisting, anti-corrosion, high rust resistance..
  • Easy to Install - Expansion Bolts come with nuts and washers. Concrete anchor and masonry anchor , easy to be mounted..
  • Application - Expansion Bolts is widely used in fence, burglarproof doors and window, canopy, air conditioning rach fixation, home decoration, engineering, etc..
Check Stock

Awclub Fully Threaded Rod, M8-1.25 Thread Pitch, 70mm Length 304 Stainless Steel Thread Bar Studs Rods, Right-Hand Threads 10pcs

  • Material: Made of high quality 304 stainless steel, excellent corrosion resistance and rust resistance.
  • All thread: Threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components..
  • Applications: Perfect for anchor bolts, clamps, hangers and U-bolts and many more projects where a metal rod with continuous threading or no head or fashioned tip is required..
  • What you get - 10Pcs x Stainless Steel Threaded Rod. If you have any question about this product, please feel free to contact us !.
Check Stock

Awclub Fully Threaded Rod, M8-1.25 Thread Pitch, 80mm Length 304 Stainless Steel Thread Bar Studs Rods, Right-Hand Threads 10pcs

  • Material: Made of high quality 304 stainless steel, excellent corrosion resistance and rust resistance.
  • All thread: Threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components..
  • Applications: Perfect for anchor bolts, clamps, hangers and U-bolts and many more projects where a metal rod with continuous threading or no head or fashioned tip is required..
  • What you get - 10Pcs x Stainless Steel Threaded Rod. If you have any question about this product, please feel free to contact us !.
Check Stock

U S Navy MCPO Retired with Master Chief Anchor HAT - Navy Blue - Veteran Owned Business

  • Quality Embroidered U S NAVY MCPO RETIRED with MASTER CHIEF ANCHOR Patch on a Navy Blue Golf Style Hat.
  • Navy Blue Cap High Detail and Impact - U S NAVY MCPO RETIRED with MASTER CHIEF ANCHOR PATCH on the Hat.
  • 8 Rows Stitching on Visor and Pro Stitch on Crown 5 panel hat.
  • U S NAVY MCPO RETIRED with MASTER CHIEF ANCHOR HAT - Adjustable Size, Navy Blue Golf Style.
  • HatnPatch Is a Veteran Owned and Operated Business - Retired Marine - We Ship Your Order Within 24 Hours And Usually The SAME DAY!.
Check Stock

FOREVTL Dry Wall Anchors and Screws Kit - 32pcs Drywall Anchors Heavy Duty Includes 8 Different Assorted Size Anchors and Screws and Installation Plier with Organizer Box

  • Perfect Solution for Hollow Walls: Hang things up easily on drywall and plasterboard with this hollow wall anchor kit..
  • Convenient & Comprehensive Package: This molly bolts setting tool includes everything you need, so you won't need to worry about buying extra screws or tools. It comes with a hollow wall anchor setting tool and 32 molly bolts in 8 different sizes, all packed in a double-sided box for easy storage and use..
  • Durable and Safe Setting Tool: The molly bolts setting tool is made of 2.5mm thickened reinforced carbon steel with heat treatment for corrosion resistance and deformation resistance. The ergonomic, non-slip grip shape of the tool also helps to prevent injuries while using it..
  • High-quality and Versatile Molly Bolts: These zinc plated carbon steel bolts are heavy-duty and can be used both indoors and outdoors. They offer a holding power of 40-65 pounds depending on size, ensuring that your items stay safely and securely in place..
  • Easy to Use and Remove: Drilling the hole, driving the anchor into the drywall, backing the screw out about 1/4", mount....
Check Stock