Categories

Best Anchoring Adhesive For Concrete

TEACH Flat Head Phillips Drive Concrete Screw to Anchor Masonry, Block & Brick,270-Piece

  • Concrete Screw Flange 5/8" Head (depending on the length, it will be either full or partial threaded). The diamond tip allows for superior penetriating into hard materials. Great for anchoring items to concrete, brick, block, or other masonry materials. Ceramic coating exceeds 500/hrs salt spray resistance.
  • An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond-shaped, nail-type point. Cuts its own threads and when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry..
  • Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. Hole should be of a depth equal to the required embedment plus 1/2”.
  • Concrete screws should be installed a minimum of ten anchor diameters between each other. They have an advantage over most other types of masonry anchors in that they can be installed close to the edge of t....
Check Stock

Makita 2 Pack - SDS-Plus 3/4” Drill Bits For SDS+ Rotary Hammers - 10' Deep Drilling Into Concrete & Masonry

  • ...ount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for reliable anchoring and sturdy holes DEEP into Reinforced Concrete or Heavy-Duty Masonry | Engineered in Japan for Makita SDS-Plus Rotary Hammer Drills and also fully compatible with All SDS-Plus Rotary Hammer Drills.
Check Stock

Shorpioen 100-Pack 1/4 x 1-3/4 Concrete Screw Hex Flanged White No Drill Bit BC-1428CNHFW

  • Building Code Approved. The diamond tip allows for superior penetriating into hard materials. Great for anchoring items to concrete, brick, block, or other masonry materials. Blue ceramic coating exceeds 500/hrs salt spray resistance.
  • An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond-shaped, nail-type point. Cuts its own threads and when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry..
  • Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. The Ruspert finish is a ceramic coating that also allows these fasteners to be used in pressure-treated lumber. Hole should be of a depth equal to the required embedment plus 1/2”.
  • The Ruspert finish is a ceramic coating that also allows these fasteners to be used in pressure-treated lumber. Check the Item Description to see if a drill is included as well..
Check Stock

BoltHold - AK-4 Asphalt Anchor & Anchoring Cement Kit - Four 1500lb Pull Rated SP10-38 Chemical Anchors 5/8 x 6 with EPX2 Anchoring Cement - For Installation of Sheds Carports Bike Racks & More

  • ASPHALT ANCHORING KIT: Stop wasting time pouring concrete! BoltHold's industrial in-ground anchors and anchoring grout allow you to install anything on asphalt in three simple steps, offering a fast, cost-effective, and reliable solution to asphalt mounting. This AK-4 Kit includes four SP10-38 (3/8"-16 x 6") Zinc-Plated Anchors with a pre-installed 1" long bolt and 1" diameter washer and two bags of EPX2 cement-based Anchoring Grout..
  • LIGHT-TO-MEDIUM LOAD: Pull rated for 1,500 lb! Designed for a light-to-medium load, BoltHold SP10-38 chemical anchors resist at least 1,500 pounds pull and 1,000 pounds of moderate shear force at ground level. Rated for 200 in-lb rotary torque, the anchor's welded spiral offers a strong bond with the grout, while the washer at the top prevents the anchor from dropping below the surface or being pulled up into the mounting plate when tightening the bolt..
  • LONG TERM STABILITY: Creates a stress-free bond that lasts! Due to asphalt's weaker nature, typical expansion-type wedge anchors used in concrete won't hold to the pressure. BoltHold anchors solve this problem by embedding deep into the compacted gravel below the asphalt layer to increase the shear resistance and ensure long-lasting stability—perfect for safely installi....
Check Stock

Sabre Tools 1/2 Inch x 18 Inch SDS Plus Rotary Hammer Drill Bit, Carbide Tipped for Brick, Stone, and Concrete (1/2\ x 16\ x 18\)

  • ...ount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
  • ✅ IDEAL for General Contractors and Construction Industry that require HEAVY DUTY SDS+ bits for reliable anchoring and sturdy holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All SDS-Plus Rotary Hammers.
Check Stock

Kelaro EZ Dishwasher Mounting Bracket Kit for Granite and Quartz Countertops W10426979

  • Ideal for granite, quartz, marble, glass, concrete and other solid surface countertops where screws can't be directly secured to the counter material..
  • Eliminates anchoring problems and accommodates most common 24" dishwashers. Simply screw in the dishwasher clips to the EZ bracket. Package contains (1) Dishwasher Bracket and (6) mounting screws. Bracket is 26.5" long, 1.75" wide and 0.25" tall. (Not compatible with thin 18" dishwashers)..
  • Can be installed before counter top installation by screwing bracket into the top of cabinets. Or after, by bending the bracket end tabs down to install to the sides of cabinets. More reliable than adhesive grabbers that will fail with dish washer vibrations..
  • Perfect for homeowner or contractor installation. New builds or remodels. Dishwasher does not have to be present for installation..
  • MADE IN USA from 22 gauge galvanized steel. Compatible part numbers: W10426979, 231179, AH3632890, EA3632890, PS3632890. Fits these common brands: Whirlpool, KitchenAid, Maytag, Amanda, Jenn-Air, Estate, Roper, Admiral, Magic Chef and others..
Check Stock

American Ground Screw U-Model Premium No Dig Ground Anchor - Screw in Post Stake - 27\

  • Concrete Free! No need to bother with digging, mixing, or waiting for concrete to set. The U-Model is 100% loadable immediately after installation.
  • Securely Holds 4x4 Posts, Five Lag Bolts Included.
  • Made with Hot-Dipped Galvanized Steel to Guarantee Structural Integrity for Decades to Come!.
Check Stock

100 Pcs 1/4 x 3 Heavy Duty Nail Drive Anchors Rustproof Drive Pins Zinc Plated Drive Anchors for Metal Steel Aluminum Angles Wood Concrete Hammer Fasteners Kit

  • A Box of 100: there are 100 pcs of 1/4" x 3" drive nail anchors in the package, plenty enough to use and replace to easily meet your daily and party needs.
  • Size Information: with a size of approximately 1/4" in diameter and 3" in length, this heavy duty nail drive anchor requires drilling a 1/4" diameter hole in concrete prior to installation.
  • Please confirm the size before placing an order.
  • Strong and Reliable: featuring zinc plated steel material, heavy duty drive nail in anchors are strong and reliable, not easy to break, deform, bend or rust, easy to serve you for a long time.
  • Practicality: these zinc plated nail drive anchors can fasten sheet metal, steel, aluminum angles, wood, etc., to concrete, ideal for structural anchoring, shelf anchoring, mechanical and handrail installations.
  • Easy to Install: 1/4 x 3" drive anchors are simple to apply, hit them into the reserved hole with a hammer, and they can be easily installed without additional tools, saving time and effort.
  • Note: anchors cannot be taken out after use, please confirm the insertion point before use.
Check Stock

DRICORE PRO Concrete Repair Structural Epoxy Injection Resin Kit (10') | Best All in One Set with Injectable Filler for Repairing Cracked Foundations, Walls, Basements, Cement Structures

  • NEW, EASY, SAFE: DRICORE PRO Concrete Repair Structural Epoxy Injection Resin Kit (10') contains everything you need to inject, fill, and repair cracks up to 10’ in length — One Tube of DRICORE PRO Concrete Repair Structural Epoxy Injection Resin, One Tube of DRICORE PRO Concrete Repair High Strength Anchoring Epoxy Paste, Two Static Epoxy Nozzles, Ten Ports, Gloves, and Instructions.
  • MULTI-PURPOSE: Our repair pack is made to fill concrete that is cracked, broken, or split. For best results, be sure to follow the instructions closely. Consult a professional if you are not experienced with fixing or repairing concrete..
  • MADE FOR THE TASK: DRICORE PRO Concrete Repair Structural Epoxy Injection Resin Kit (10') is a high strength and water resistant concrete repair set for concrete repair jobs. Versatile enough to use both at home and at work, our industrial strength kit is great for contractors and experienced DIY repairmen doing home projects, basement, garage renovations, and more.
  • COST EFFECTIVE, SIMPLE TO USE: Our repair kit is a relatively cheap but effective way to fix your clients’ concrete structure, apartment, condo, or house. Save both time and money by using our specially engineered and designed repair package for your next project or conc....
Check Stock

Pool Boy II Automatic Solar Reel with Remote Control

  • Select cover based on your pool size. Actual cover measures approximately 2-ft wider and 2-ft longer.
  • Comes complete with all hardware to install on concrete decking.Fabric Type:Polyethylene.
  • Includes: brass anchors, stainless-steel springs, buckles, installation tools, and storage bag.
  • Drill and tamp style brass anchoring system permanently secures anchors in concrete.
  • Multi-seamed stitching ensures safety and prevents wear and tear.
  • Stainless steel hardware resists damage from the elements.
  • High scrim mesh panel design lets water though but protects pool against dirt and debris.
  • Reinforced wear strips on underside of cover to guard against cover abrasion and fraying.
Check Stock

BOSCH HCK001 7 Piece Carbide-Tipped SDS-plus Rotary Hammer Drill Bit Set with Storage Case

  • INNOVATIVE: The Bosch HCK001 Drill Bit Set features optimized 4-flute design to reduce bit stress when drilling and for faster dust removal..
  • FOR USE: Use with SDS-Plus rotary hammers, delivering optimal hole geometry in a variery of applications including concrete, brick, block and more.
  • VERSATILE: Ideal for anchoring and through-hole applications in concrete.
  • LONGEVITY: Carbide tip is tougher and more durable under heavy loads.
  • PORTABLE: The included rugged storage case allows for easy access, organizing and portability.
Check Stock

BoltHold - SP58 Zinc-Plated Asphalt Anchor 1-1/4 x 10 - with 1.5 Hex Bolt & 2 Washer - Chemical Anchors - for Installation of Sheds Carports Bike Racks & More - 5000 lb Pull Rated - 6 PK

  • ...by embedding deep into the compacted gravel below the asphalt layer to increase the shear resistance and ensure long-lasting stability—perfect for safely installing carports, sheds, speed bumps, signage, lights, parking barriers, and many more asphalt mounting applications..
  • EASY TO INSTALL: BoltHold makes asphalt anchoring a breeze! For quick installation, drill a hole deep into the asphalt and the gravel below it and fill with EPX2 or EXP3 Anchoring Grout (sold separately). Push in the anchor until it is flush with the asphalt surface and allow grout to harden. Anchors are ready for use in 15 minutes. Full strength may take one hour..
  • ASPHALT ANCHORS CORP: We pride ourselves on offering reliable and effective solutions for asphalt mounting. Our heavy-duty BoldHold anchoring products are manufactured with high-grade materials and tested to provide you with long-lasting durability you can trust..
Check Stock

LLPT Double Sided Tape for Woodworking Template and CNC Removable Residue Free 108 Feet Multiple Sizes (WT258)

  • APPLICATION: LLPT Double Sided Woodworking Tape is specialized for woodworking, template, CNC machining, turning, cutting, pattern routing, anchoring and slicing. The adhesion of tape is strong, but would not damage or remain any glue on the surface whiling removing after woodturner or CNC job is done. Also, it can be used alternatively for home or office use to signs, name plates, photo albums, crafting and so on..
  • CONSTRUCTION: The adhesive layer is silicone-based adhesive with yellow backing, optimal thickness is good for resisting curling, breaking, easier applying, removing and tangling. Its high temperature resistance is up to 120 Celsius Degree..
  • AFFIX MATERIALS: Suitable to be used on wood, aluminum, steel, Peek, PMMA/plastic (not fiberboard), concrete, tile, marble and so on. This tape is thin but strong two-sided tape and tough balancing act. Its intended purpose SPECIALLY is to fasten templates/jig to wood, plastic, aluminum and steel for marking and cutting. It needs to hold the template firmly, but still allow its release due to removable performance..
  • EASY USE AND REMOVE: The yellow paper backing is very easy ....
Check Stock