Categories

Best Anchoring Drilling Rig

Happybuy Diamond Core Drill, 2180W 7\/180 mm, 1600RPM Variable Speed Core Drill Rig with Portable Case, Handheld Drilling Machine for Hard Stone, Concrete, Marble, Granite, Brick

  • 7 inch Max Drilling Diameter: 2180W powerful motor of the handheld core drill rig is designed for wet drilling in reinforced concrete, stone, asphalt, marble, ceramic, walls, floors, and more. With a 7"/180mm max drilling diameter and 1600RPM stepless speed, you can drill with less effort..
  • Durable Steel Output Shaft & Copper Inlet: As the machine will work upside down, water will unavoidably flow on to the drill machine. In this case, our drilling rig has a rustproof steel forged output shaft and waterproof copper water inlet for a long-lasting water supply..
  • Over-current Protection: We also provide an overload protection system and an upgraded cooling system. They are designed for avoiding burn-in and prolonging the service lifespan of the drilling press machine..
  • Comfortable Shoulder Rest & Handle: The upgraded shoulder rest is designed to save your energy. The slip-proof rubber handle greatly enhances friction and reduces vibration to completely control the hammer with comfort. Besides, tools are well stored and sorted in a compact case..
  • Wide Range of Application: The wet diamond core drilling rig can be widely used in drilling reinforced concrete, red brick, marble, and other materials. It is perfect for installing air conditioners, pipes, stair ra....
Check Stock

Schluter - Shelf-W Wall Shelf - Floral

  • The Schluter-SHELF-W is a rectangular shelf with two trapezoid-perforated anchoring legs for installation on walls in conjunction behind the tile.
  • Features a double anchoring leg for simplified tandem tile installation.
  • Installation without drilling by integration into the joint pattern.
Check Stock

Happybuy 8 Inch/205MM Diamond Core Drilling Machine 3980W Diamond Core Drill Rig with Stand and Drill Bits,Wet Dry Core Drill Rig for Diamond Concrete Drilling Boring (Drill Bit Diameter: 4.25'/108MM)

  • 8 inch Max Drilling Diameter: Our core drilling machine generates extreme power because of its 3980W copper motor. Maximum Speed: 750RPM. Maximum Coring Diameter: 8"/205 mm. More importantly, the 4.25"/108 mm core bit in the picture is included..
  • Durable Construction: As the machine will work upside down, so water would unavoidable flow on to the drill machine. In this case, our drilling rig has a rustproof steel forged output shaft and waterproof copper water inlet for a long-lasting water supply..
  • Thoughtful Security Design: We also provide overload protection system and an upgraded cooling system. They are designed for avoiding burn-in and prolonging the service lifespan of the drilling press machine..
  • Ergonomic Handle & Stable Base: It features an ergonomic handle and large base support for effortless drilling or getting oblique holes. The aluminum guide rail makes the drill rig's movement more smooth and accurate..
  • Wide Application: The wet diamond core drilling rig can be widely used in drilling reinforced concrete, red brick, marble, and other materials. It is perfect for installing air conditioners, pipes, stair railings, and repairing highways, etc..
Check Stock

Happybuy 6 Inch/160MM Diamond Core Drilling Machine 2180W Diamond Core Drill Rig with Stand and Drill Bits,Wet Dry Core Drill Rig for Diamond Concrete Drilling Boring (Drill Bit Diameter: 4.25'/108MM)

  • 6.3 inch Max Drilling Diameter: Our core drilling machine generates extreme power because of its 2180W copper motor. Maximum Speed: 1600RPM. Maximum Coring Diameter: 6.3"/160 mm. More importantly, the 4.25"/108 mm core bit in the picture is included..
  • Durable Construction: As the machine will work upside down, so water would unavoidable flow on to the drill machine. In this case, our drilling rig has a rustproof steel forged output shaft and waterproof copper water inlet for a long-lasting water supply..
  • Thoughtful Security Design: We also provide overload protection system and an upgraded cooling system. They are designed for avoiding burn-in and prolonging the service lifespan of the drilling press machine..
  • Ergonomic Handle & Stable Base: It features an ergonomic handle and large base support for effortless drilling or getting oblique holes. The aluminum guide rail makes the drill rig's movement more smooth and accurate..
  • Wide Application: The wet diamond core drilling rig can be widely used in drilling reinforced concrete, red brick, marble, and other materials. It is perfect for installing air conditioners, pipes, stair railings, and repairing highways, etc..
Check Stock

VEVOR Core Drill Machine 305 MM 12 Inches Core Drill Rig Powerful Rugged Diamond Concrete Core Drill 110V 500 r/min Core Drill Rig Tool Wet Dry Concrete Brick Block Drilling 4800W 45 Degree Rotation

  • 12 inch Max Drilling Diameter: Our core drilling machine generates extreme power because of its 4800W copper motor. Maximum Speed: 500RPM. Maximum Coring Diameter: 12"/305 mm. More importantly, the 4.25"/108 mm core bit in the picture is included..
  • Durable Construction: As the machine will work upside down, so water would unavoidable flow on to the drill machine. In this case, our drilling rig has a rustproof steel forged output shaft and waterproof copper water inlet for a long-lasting water supply..
  • Thoughtful Security Design: We also provide overload protection system and an upgraded cooling system. They are designed for avoiding burn-in and prolonging the service lifespan of the drilling press machine..
  • Ergonomic Handle & Stable Base: It features an ergonomic handle and 45-degree rotatable large base support for effortless drilling or getting oblique holes. The aluminum guide rail makes the drill rig's movement more smooth and accurate. Two casters for easy transport..
  • Wide Application: The wet diamond core drilling rig can be widely used in drilling reinforced co....
Check Stock

VEVOR 12Inch/305MM Core Drill Machine,4800W Core Drill Rig,Powerful Rugged Diamond Concrete Core Drill,110V 500r/m Wet Dry Concrete Brick Block Drilling Machine (Drill Bit Diameter:4.5'/114MM)

  • 12 inch Max Drilling Diameter: Our core drilling machine generates extreme power because of its 4800W copper motor. Maximum Speed: 500RPM. Maximum Coring Diameter: 12"/305 mm. More importantly, the 4.25"/108 mm core bit in the picture is included..
  • Durable Construction: As the machine will work upside down, so water would unavoidable flow on to the drill machine. In this case, our drilling rig has a rustproof steel forged output shaft and waterproof copper water inlet for a long-lasting water supply..
  • Thoughtful Security Design: We also provide overload protection system and an upgraded cooling system. They are designed for avoiding burn-in and prolonging the service lifespan of the drilling press machine..
  • Ergonomic Handle & Stable Base: It features an ergonomic handle and 45-degree rotatable large base support for effortless drilling or getting oblique holes. The aluminum guide rail makes the drill rig's movement more smooth and accurate. Two casters for easy transport..
  • Wide Application: The wet diamond core drilling rig can be widely used in drilling reinforced concrete, red brick, marble, and other materials. It is perfect for installing air conditioners, pipes, stair railings, and repairing highways, etc..
Check Stock

Makita 2 Pack - SDS-Plus 3/4” Drill Bits For SDS+ Rotary Hammers - 10' Deep Drilling Into Concrete & Masonry

  • ...ount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for reliable anchoring and sturdy holes DEEP into Reinforced Concrete or Heavy-Duty Masonry | Engineered in Japan for Makita SDS-Plus Rotary Hammer Drills and also fully compatible with All SDS-Plus Rotary Hammer Drills.
Check Stock

Keyfit Tools Power Anchor (8 Pack) Self Drilling Stakes for Pop-Up Portable Ice Fishing Shelter House Self Drilling Stake Anchor

  • Keyfit Tools Power Anchor Self Drilling Stakes for Pop-Up Portable Ice Fishing Shelter House Self Drilling Stake Anchor.
  • Self Drilling Cutting Tip Solid Steel ~ Case Hardened Grade 8 Steel Heat Treated & Tempered For Extreme Durability.
  • Use with or without Secura Strap for Easy Anchoring High Winds No Problem ~10 inch length for Extra Anchoring.
  • USE DRILL ON SLOW SPEED with down force. Let the screw threads cut into the ice making a groove for them selves. Too much speed will strip the ice. Does Not Include Drill.
  • See All The Keyfit Tools Products On Amazon ~Keyfit Tools Patented Products.
Check Stock

Sabre Tools 1/2 Inch x 18 Inch SDS Plus Rotary Hammer Drill Bit, Carbide Tipped for Brick, Stone, and Concrete (1/2\ x 16\ x 18\)

  • ...ount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
  • ✅ IDEAL for General Contractors and Construction Industry that require HEAVY DUTY SDS+ bits for reliable anchoring and sturdy holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All SDS-Plus Rotary Hammers.
Check Stock

CS Unitec ETN 162/3 P - 6-3/8" Capacity Concrete Core Drill - Wet/Dry Diamond Core Drill - 3-Speed For Concrete, Brick, Block, and Stone - MADE IN GERMANY - 110V

  • Heavy-duty, light-weight hand-held core drill rig with 6-3/8" diameter hole capacity - Rig Mounted Kits Available- MADE IN GERMANY.
  • Powerful 19.5 amp, 110V motor for demanding use when wet drilling in reinforced concrete, stone, asphalt, marble, ceramic, walls, floors and more.
  • 3 speed gear box (0-510/0-1150/0-2500 rpm load speed) concrete drill with oil bath gear box and mechanical safety clutch for optimal lubrication, reduced heat and increased user safety.
  • Machine integrated water supply with gardena style quick connect and adjustable valve for easy use with standard garden hose. GFCI over-current cut-off protection standard.
  • Only 15 lbs., Collar Diameter 60mm collar for easy mounting, rig mounting kits available. Easy Changeover for wet / dry drilling with integrated connections..
Check Stock

Bosch TCHC9 SDS-plus® Universal Concrete Screw Installation 9 pc. Kit

  • Fast-drilling Bulldog SDS-plus bit design – with a carbide tip, brazing process and centric tip for rapid rotary concrete drilling.
  • Bosch-made carbide tip – deliver outstanding durability under heavy loads.
  • Upgraded flute design – aggressively pulls dust away from hole, for faster and cooler drilling.
  • Centric conical tip – ideal for drilling anchoring holes, the centering tip provides precise starts.
  • Hex drive on bit fits into driver sleeve – features a 1/4 In. hex shoulder for a drive sleeve used to set masonry screws.
Check Stock

Irish Setter Work Men's 83912 Marshall 11" Pull-On Steel Toe Waterproof Work Boot,Brown,10 D US

  • Heavy-duty, light-weight hand-held core drill rig with 6" diameter hole capacity - Rig Mounted Kits Available- MADE IN GERMANY.
  • Powerful 15 amp, 110V motor for demanding use when wet drilling in reinforced concrete, stone, asphalt, marble, ceramic, walls, floors and more.
  • 3 speed gear box (600/1300/2800 rpm load speed) concrete drill with oil bath gear box and mechanical safety clutch for optimal lubrication, reduced heat and increased user safety.
  • Machine integrated water supply with gardena style quick connect and adjustable valve for easy use with standard garden hose. GFCI over-current cut-off protection standard.
  • Only 16 lbs., Collar Diameter 60mm collar for easy mounting, rig mounting kits available..
Check Stock

Baby Shower / Genie and Friends / Padlock &computer

  • Welcome to the most versatile, highest rated mount on the market that is always getting better and stronger. Best price – Best design – Leave it to Mount Genie..
  • Our Patent-Pending “T-Bracket” is made out of the highest strength nylon and holds over 50 pounds in drywall anchoring, and 100 pounds in Stud anchoring..
  • The All In Wonder Mount is compatible with ALL components from a circumference of 10 inches up to a whopping 31 inches! This includes: Routers, Modems, Soundbars, Apple TV, DVRs, DVD players, Game Systems (X-box, PlayStation, etc), Amplifiers (Sonos), Cable boxes, and even small desktop computers! Buy it once and you never need an upgrade!.
  • Installs in a minute or two with just a Phillips heads screwdriver. No drilling for standard drywall installs!.
  • Commercial grade Velcro straps allow for simple install and removal of components that travel with you, like game consoles..
Check Stock