Categories

Best Anchors For Concrete Block

Hard-to-Find Fastener 014973269470 Lag Expansion Shields, 1/4 Short, Piece-12

  • Expansion shield anchors for use with lag screws are designed to anchor into concrete, brick, and block..
  • Expansion shield anchors consist of pre-assembled two-part expansion shields..
  • These anchors expand as a lag screw is fastened through the anchor..
  • These anchors feature very precise tapered internal threading to permit easy turning of the lag screw..
  • Zinc plating adds a layer of corrosion resistance to the anchors..
Check Stock

The Hillman Group 260288 1 1 1 1/2 x 8-Inch Anchor Bolt, 50-Pack

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

Qty 25 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolts, Wall Anchor Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

Qty 6 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

TEACH Flat Head Phillips Drive Concrete Screw to Anchor Masonry, Block & Brick,270-Piece

  • Concrete Screw Flange 5/8" Head (depending on the length, it will be either full or partial threaded). The diamond tip allows for superior penetriating into hard materials. Great for anchoring items to concrete, brick, block, or other masonry materials. Ceramic coating exceeds 500/hrs salt spray resistance.
  • An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond-shaped, nail-type point. Cuts its own threads and when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry..
  • Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. Hole should be of a depth equal to the required embedment plus 1/2”.
  • Concrete screws should be installed a minimum of ten anchor diameters between each other. They have an advantage over most other types of masonry anchors in that they can be installed close to the edge of t....
Check Stock

5/16\-18 Double Expansion Shields (Pack of 12)

  • Zamac Zinc Alloy Concrete Anchors for Masonry Screws or Bolts.
  • Four Part design: a two-piece tubular shield, a hollow, wedge-shaped cone and a wedge-shaped nut-- brought together into a single anchor unit.
  • Used in soft masonry with machine screws or machine bolts.
  • Can also be used in harder materials, including stone, brick, concrete or block.
Check Stock

Arrested Development

  • STRONG FIXED ABILITY - Our concrete wall anchors are made of high quailty plastic. Combined with lag bolt sturdily on the concrete or brick wall..
  • WIDE APPLICATION - Need to mount your TV on concrete or brick wall but no anchors? Our anchors for concrete or brick wall can help you..
  • EASY INSTALLATION - With the corresponding hole in the wall, it is easy to hammer the anchor bolt into the wall..
  • BASIC INFORMATION - Rod Diameter: 10mm/3/8”, Total length: 50mm/2”. Package Content: 6 pcs concrete wall anchors in one pack..
  • WORLD-CLASS CUSTOMER SERVICE - Our customer service team is glad to provide support on pre-purchase or installation problems for customers at any time..
Check Stock

BoltHold - SP12-38 Zinc Plated Steel Asphalt Anchor (5/8\ x 12\) - with 1\ Hex Bolt & Washer - Chemical Anchors - for Installation of Sheds, Carports, Bike Racks, & More - 2000 lb Pull Rated - 6 PK

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

Premium Quality Ribbed Plastic Anchors, 8-10 x 1-1/4' - Plastic Anchors Assorted for Concrete,Brick,Drywall,Plaster,Blue 120 Pack…

  • These Ribbed Plastic Anchors are intended to use in concrete,brick,hallow block,drywall and plaster..
  • Works well in hard surfaces where no studs or beams are behind the surface..
  • The split in the ribbed anchors expand on two opposing sides as you tighten the screws,increasing holding power..
  • Pre-drilling is required:1/4″ drill hole size. Screws are not included..
  • Those drywall anchors are packed in poly bag without instructions..
Check Stock

Shorpioen 100-Pack 1/4 x 1-3/4 Concrete Screw Hex Flanged White No Drill Bit BC-1428CNHFW

  • Building Code Approved. The diamond tip allows for superior penetriating into hard materials. Great for anchoring items to concrete, brick, block, or other masonry materials. Blue ceramic coating exceeds 500/hrs salt spray resistance.
  • An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond-shaped, nail-type point. Cuts its own threads and when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry..
  • Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. The Ruspert finish is a ceramic coating that also allows these fasteners to be used in pressure-treated lumber. Hole should be of a depth equal to the required embedment plus 1/2”.
  • The Ruspert finish is a ceramic coating that also allows these fasteners to be used in pressure-treated lumber. Check the Item Description to see if a drill is included as well..
Check Stock

Concrete Anchors and Screws Kit 100Pcs Masonry Anchors and 100Pcs Masonry Screws with 1Pcs Drill Bit Blue Conical Anchors and Self Tapping Screws for Stucco Concrete Masonry Brick Wall

  • Premium materials: All the concrete anchors and screws are made of durable materials,The concrete screws are made of carbon steel and galvanized, Will not rust or corrode. and the thick PE material anchor is not easily worn and aged.
  • Convenient Installation: The masonry anchors and screws kit come with corresponding size drill bit, You can use it to drill just the right size hole on the wall, then knock the anchor in, and finally screw the screws in, without you having to think extra about what size tool to use, concrete anchors and screws kit make your installation easier.
  • Commonly used size: The #10 concrete screws is 35mm long, the concrete anchors is 36mm,it's not too long and not too short,It's suitable for you mount stuffs such as doorbells, curtain rails, pictures, mirrors, photo frames and lanterns on brick walls, concrete walls, drywalls, wooden walls and more.
  • Space saving storage: This drywall anchors and screw kit comes in a beautiful clear plastic storage box that helps you keep all the anchors and screws safely stored and well while taking up only a little space. The clear box also makes it easy to choose the wanted screws and anchors.
  • What you get – The package includes 1 drill bits, 100pcs of high-quality wall anchors, 100pcs head ....
Check Stock

Akord Anchor Plastic Assortment Kit 130PCS, Nylon Mushroom Head, Wall Anchors and Screws for Drywall Anchors, Hollow Wall, Concrete Anchors, 2 Types & 8 Sizes Different Specifications, 65 Set

  • MORE SIZES AND CHOICES: Anchor Plastic Assortment Kit has 2 Types & 8 Sizes Nylon Mushroom Head Anchor. You will have different specifications anchors for hollow wall, which can solve different problems..
  • PRODUCT FEATURES: Constructed of high-quality materials for long-lasting durability. Can Be Hammered All The Way Into the Hole Without Pre-Expansion, Nylon Body Provides Insulation Between Drive Screw and Work Surface..
  • MULTI PURPOSE: Designed for Use in A Variety of Substrates Such as Concrete, Stone, Solid Brick, Solid Block, Hollow Brick, Hollow Block and Hollow Slab, Quick and Easy to Install and Remove..
  • HANDY BOX: All of the Anchors will be packed in a sturdy plastic box, can be used as a storage box. Not only give you the best Anchors, but also the best storage system..
  • 30 DAYS REFUND WARRANTY: AKORD offers a free replacement or refund against any manufacturer defects. Please feel free to contact us if you have any questions about our products..
Check Stock

Concrete Drop in Anchors 304 Stainless Steel 1/4 -20 x 1 Qty 1000

  • 1/4"-20 Drop-in anchors are female (internal) threaded concrete anchors, typically installed overhead that run flush with the surface of concrete or stone..
  • Used in flush-mount applications in solid base materials..
  • These anchors are installed crimped side down in a pre-drilled hole..
  • Concrete drop in anchors require a setting tool for proper installation..
  • Corrosion resistant and durable, resists oxidizing and rust, but can tarnish over time..
Check Stock