Categories

Best Anesthesia Machine Oxygen Sensors

ITEQ 7/8 Inch (22 mm) 6-Point by 1/2 Inch Drive Offset Oxygen Sensor Socket with Wide Side Cutout for Preventing Damage to Wires

  • Perfect tool for removing, inspecting, replacing and installing heated and non-heated oxygen sensors on most vehicles with computer-controlled engines.
  • The 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 1/2” drive and 7/8” ends can be used with both ratchet and torque wrench.
  • The oxygen sensor socket's special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires.
  • Made of high-quality Chrome vanadium steel for extra strength and durability.
  • Suitable for oxygen sensors found on most modern vehicles.
Check Stock

Bapmic 5-Wire Wideband Oxygen Sensor O2 Sensors Upstream for Cadillac Infiniti Nissan CTS QX56 Frontier Forester 250-25005

  • [ REMINDERS ] - Please must read our description and pictures carefully to check details about our sensors, especially the plug, it must be completely....
  • [ PART NUMBER FITS ] - Please check your vehicle's parts Number, It must in our fitment OEM number: 234-9066 250-54022.
  • [ Meet or Exceed OE Standard ] - HiSport oxygen sensors are manufactured under the highest standards, with anti-oxidant coating, durable and resistant....
  • [ 100% TESTED ] - All oxygen sensors are tested by our QA department before the packing. It may cause the test solution remains on the sensor surface,....
  • [ EASY TO INSTALL ] - Direct Plug-In installation, All HiSport oxygen sensors are easy to be replaced in your vehicle, and all parts are pre-installed....
Check Stock

Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set-5 Pcs, 02 Oxygen Sensor Socket Offset Wrench Remover Tool,A7841F-FBA +Thread Chaser,by Lucky Seven

  • ...Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • Oxygen Sensor Socket Wrench Set Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires，Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines..
  • 5 Pcs Oxygen Sensor Switch Socket Wrench Kit and Thread Chaser Set-3 types of universal socket wrenchs cover various situations of oxygen sensor location,6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar..
  • Oxygen Sensor Socket Wrench kit-Including 3 oxygen sensor sockets and 2 thread chasers for cleaning and repairing damaged threads,oem oxygen sensor wrench socket,oxygen sensor wrench socket,o2 oxygen sensor socket wrench,o2 sensor socket wrench,oxygen sensor wrench set,oxygen sensor wrench tool,oxygen sensor wrench kit,oxygen sensor wrench 1/2 drive,oxygen sensor wrench socket..
  • Automotive oxygen sensor removers,the it....
Check Stock

Denso 234-9009 Oxygen Sensor , Grey

  • Air/Fuel Ratio Sensors Utilize a Sophisticated Sensing Element that Enables Them to Produce a Precise Output in Proportion to the Air/Fuel Ratio.
  • Double Protection Cover Maintains Proper Unit Temperature for Quicker Response Times and Protects the Ceramic Element From Contamination.
  • Denso Oxygen Sensors Feature an Aluminum-Oxide Trap Layer to Protect the Ceramic from Silicone and Lead Poisoning, Preventing Damage to the Platinum Electrod.
  • Stainless Steel Housing Resists Corrosion and Contamination with a Rugged, Watertight Body.
  • Porous PTFE Filter Allows Atmospheric Oxygen the Enter the Sensor without Permitting Water or Engine Contaminants to Seep into the Casing.
  • AFR Sensors Provide the ECU with an Exact AFR Response, Resulting in Better Performance, Lower Emissions, and Increased Gas Mileage..
Check Stock

ITEQ 5 Pcs Automotive Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set

  • Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines.
  • 3 types of universal socket wrenchs cover various situations of oxygen sensor location.
  • 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar.
  • Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires.
  • Set Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
Check Stock

3/8-Inch Drive Oxygen Sensor Socket Offset Wrench Remover Tool

  • PackageIncludes 2 7/8" 3/8 Inch Drive Vacuum Switch Sockets and One 7/8" x 1/2" drive Oxygen Sensor Socket.
  • Design Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots..
  • Material Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust..
  • Usage Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!.
  • Service 100% satisfaction guarantee, If you have any issues with the oxygen sensor socket, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

7PCS Oxygen Sensor Socket 22mm (7/8 in), 27mm, 29mm fits All Vehicle O2 Removal and Installation Universal Puller and Removal Tool (Red, 7PCS)

  • 【High Qulity】Made of high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust and corrosion..
  • 【Size】 7mm slot, 7/8” (22mm) x 6-point x 3-1/10” (80mm) length, 3/8 inch square drive for use with ratchet. Fits all standard oxygen sensors with a 7/8” hexagon nut..
  • 【Design】Standard 6 point with low profile and 8mm x 64mm side cutout design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots..
  • 【USE】 Built for use with 3/8” ratchets, 1” wrenches, and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!.
  • 【Service】100% satisfaction guarantee, If you have any issues with the oxygen sensor socket, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

TEKTON 3/8 Inch Drive x 7/8 Inch 6-Point Oxygen Sensor Socket | 4929

  • Removes and installs oxygen sensors on vehicles with computer-controlled engines.
  • Common 6 point, 7/8 in. (22mm) socket fits most oxygen sensors.
  • Use with any 3/8 in. drive ratchet or breaker bar.
  • Constructed from drop forged, heat treated, chrome vanadium steel.
Check Stock

KAX 234-4668 Oxygen Sensor Original Equipment Replacement 250-24470 Heated O2 Sensor 1Pcs

  • CAUTIONS: Pls carefully check your vehicle year & make & model with the fitment of Amazon. You must read our description carefully, and it will tell you more about the fitment. Pls check your part pictures with our pictures, especially the plug，it must be completely same. Or it will not fit your car. Pls check your parts No. It must be among our fitment OEM No..
  • 100% exact match OE standard 234-4668 ,250-24470 oxygen sensor,Manufactured to the highest standards, KAX oxygen sensors are durable and resistant to oxidation and high temperatures, ensuring long-term stable performance.
  • Thorough testing by our engineers guarantees 100% accurate data transfer to the engine management system for optimal engine operation and longevity.
  • Replacing your engine’s oxygen sensor can improve engine performance and fuel economy, reduce harmful emissions, and prevent premature catalytic converter damage.
  • KAX oxygen sensors are easy to install on your vehicle, and come with pre-coated threads to assist installation.
Check Stock

DAYUAN 10Pcs Oxygen Sensor Socket Set Sensor Oil Pressure Sending Unit Removal Kit

  • Suitable for oxygen sensors found on most modern vehicles..
  • Cut-out and slots enable sockets to be fitted over wiring harness.
  • Includes 2 chasers for cleaning and repairing damaged threads.
  • Ideal for removing and installing oxygen sensors and vacuum switches on vehicles..
Check Stock

Oxygen Sensor for Aston Martin Ford Jaguar Lincoln Mazda Mercury Nissan Compatible with Bosch 15717

  • High Quality: A ABIGAIL Oxygen Sensor Features double protection layer, aluminum oxide trap layer, PTFE filter and stainless steel housing..
  • Function:Lambda sensor can improve engine efficiency performance and fuel economy, reduce CO2 and other harmful emissions, extend expensive Catalytic....
  • Interchange Part number: A ABIGAIL Oxygen Sensor is Compatible with 15717, ZZC318861. These sensors will meet or exceed OEM standards, it is a direct....
  • The metal shroud doesnot look as shiny as other Oxygen Sensors. Because it is made of SUS310 high temperature resistant material. And every single....
  • One Year Unlimited Warranty. Please use the Year & Make & Model drop down bar and check the wire length & plug & position to confirm the compatibility....
Check Stock

TEKTON 3/8 Inch Drive x 7/8 Inch Offset 6-Point Oxygen Sensor Socket | 47749

  • Removes and installs oxygen sensors on vehicles with computer-controlled engines.
  • Common 6 point, 7/8 in. (22mm) socket fits most oxygen sensors.
  • Offset drive with wire gate accesses sensor from the side, not the top, preventing damage to wires.
  • Use with any 3/8 inch drive ratchet or breaker bar.
  • High-performance chrome molybdenum steel construction.
Check Stock

Michigan Motorsports GREY 02 Oxygen Sensor Extension Square 4 Pin LS1 LS2 O2 Wire Harness Gray 24 inches long

  • GREY 02 Oxygen Sensor Extension Square 4 Pin LS1 LS2 O2 Wire Harness Gray 24".
  • QTY 2 24 inch Grey Square Connector O2 Sensor Extensions.
  • This listing is for two 24" grey square connector oxygen sensor extensions. They will work on many GM application besides those listed..
  • Look carefully at the connector pictures to verify they are what you need, ask if you are unsure..
  • Fitment information: 08-09 G8 GT V8 2004 LS1/LS6 Corvette (front sensors) 04-06 LS1/LS2 GTO (front sensors) 04-05 LS6 CTS-V (front sensors and rear)....
Check Stock