Best Angle Adjustment
Wicked Edge Gen 3 Pro - Precision Knife Sharpener
- MADE IN THE USA. Wicked Edge has produced highest quality precision knife sharpening systems since 2007..
- LIMITED LIFETIME WARRANTY. We are proud of our sharpening systems and we stand behind our products..
- INCLUDES: - Includes hard carrying case with custom foam insert. - Coarse 100 Grit / Medium Coarse 200 Grit Diamond Stones Pack. - Medium Fine 400....
- FASTEST AND EASIEST TO USE of any Wicked Edge sharpener. Rapid Angle Adjustment Mechanism - angle is changed on both sides of the sharpener....
- SHARPENS BLADES UP TO 15" LONG. Angle Range: 13.5 to 27.5 Degrees (27 to 55 degrees inclusive). Main angle adjustment in 0.50 degree increments, and....
Check StockSantorini Electric Spa Treatment Table (Facial Chair/Bed) by SKINACT
- Electric backrest angle adjustment (Note: The backrest and leg rest sections operate independently of each other).
- Electric leg rest angle adjustment (Note: The backrest and leg rest sections operate independently of each other).
- Manual drop-down arm rests (air-gas pump assisted).
- Length: 77.5" Width: 31.5" Heights: 25" - 31" BASE ONLY Dimensions: 59"L x 22"W.
Check StockKOSIEJINN Stair Tread Template Tool Stair Tread Measuring Tool 30“- 49”Length Adjustment 0-270°Angle Adjustment Suitable for Stairs Risers and Partitions
- 【Real Practical Tool】When you are still worried about not being able to accurately measure the stair pedal, this tool can solve your troubles,....
- 【High Quality Material】The stair measuring tool is made of impact resistant and corrosion-resistant high-quality wood material. The angle and....
- 【Ergonomic Design】The pedal template tool can realize any angle adjustment between 0-270 ° and any length adjustment between 30 "- 49", which can....
- 【Easy to Use】The angle and length adjustment of this product is very easy, which meets any work requirements. The length and angle of the tool can....
- 【Best Service】Our stair measuring tools are very easy to install and use. If you encounter any problems, we will solve them for you at the first....
Check StockBents Electric Medical Spa Treatment Table Facial Massage Bed
- 4 motor electric treatment table/chair for our clients (The rotation is manual system) Rotation: 80° each side.
- Electric motor to adjust back and leg Electric height adjustment Electric tilt adjustment.
- ackrest Angle: 0° to +85° Seat Angle: -4° to +10° Footrest Angle: 0° to -75° Height: 25" to 37" Dimensions: (L x W x H) 77" x 32" x 25"-37".
Check StockBENTS Black Electric Medical SPA Treatment Table (Facial Massage Bed)
- 4 motor electric treatment table/chair for our clients (The rotation is manual system) Rotation: 80° each side.
- Electric motor to adjust back and leg Electric height adjustment Electric tilt adjustment.
- Backrest Angle: 0° to +85° Seat Angle: -4° to +10° Footrest Angle: 0° to -75° Height: 25" to 37" Dimensions: (L x W x H) 77" x 32" x 25"-37".
Check StockPowerful Suction Cup Camera Car Mount with Tripod Adapter and Phone Holder for GoPro Hero 11/10/9/8/7/6 Black, iPhone,DJI Osmo Action, Samsung Galaxy, Google Pixel and More (3.3*3.3*5.6in)
- 85MM(3.35IN) DIAMETER POWERFUL SUCTION CUP:The suction surface of the suction cup is made of self-adhesive material, which can be firmly adhered without being buckled. Give your camera a double protection when buckled..
- MULTI-ANGLE ADJUSTMENT:The suction cup itself has a variety of fixed adjustment positions. With the combination, you can meet any desired shooting angle. Please make the most of your hands-on ability..
- COMPATIBLE:The powerful suction cup is used with the phone holder in the set and can be used to hold the phone. Attach it to the window or windshield, which is a navigation bracket or driving record holder..
- NOTE:Pls make sure install your suction cup well before installing your camera or mobliephone..
Check StockRain Design mStand Tabletpro 9.7-11 iPad Pro/Air Silver 10056
- Angle/height-adjustable stand ensures precise angle and eye level viewing..
- Angle-adjustment 0 to 45 degree. Tilts iPad Pro with a simple push/pull..
- Height-adjustment 2.5 to 5.5 inches (65-140mm). Raises iPad Pro with a simple slide-'n'-lock..
- Acoustic base provides clearer sound. Cable outlet for easy management.
- For using iPad/iPad Air/iPad Pro 11" as a second display for MacBook with mStand..
Check StockRUBI TOOLS DC250-1200 Wet Tile
- 【One-piece guide plate】Using cold rolling process, non-welding, alloy material, one-piece forging, not easy to break, and long service life..
- 【Alloy chain】 high temperature quenching treatment, not easy to break, higher hardness, more wear-resistant, smooth harvesting..
- 【Chain tension adjustment knob】The knob is designed to be enlarged, and the screw can be automatically adjusted by loosening the screw slightly before adjustment, and it should not be too tight..
- 【Easy to Modify】The angle grinder drill attachment is an easy-to-operate tool that allows users to replace the angle grinder with a chainsaw. This allows the user to easily switch between the angle grinder and the chainsaw. With this retrofit kit, you don't need to buy a new chainsaw, just spend a little time retrofitting, saving you money and time..
- 【Easy to use】One angle grinder has been developed for two purposes, and the idle angle grinder can also be rejuvenated..
Check StockSaved By Daddy (Mountain Daddies Book 3)
- 3 modes of use: rear facing infant mode (4-18lbs), rear facing toddler mode (18-40lbs), and forward facing toddler mode (22-65lbs).
- Immediate right installation angle: rear-facing recline flip foot allows for great installation angles with ease.
- The built-in bubble level indicator helps find the correct angle.
- Fits three across: at its widest, the Trooper is 16.75" Allowing it to fit 3 ACROSS in most vehicles.
- Lightweight: lightweight shell also allows for use of latch Installation up to 55 lbs.
- Shoulder & crotch buckle adjustment: 5-position shoulder height adjustment and 3- position crotch buckle for seat adjustment.
Check Stock
Woodworking with Power Tools: Tools, Techniques & Projects
- 【One-piece guide plate】Using cold rolling process, non-welding, alloy material, one-piece forging, not easy to break, and long service life..
- 【Alloy chain】 high temperature quenching treatment, not easy to break, higher hardness, more wear-resistant, smooth harvesting..
- 【Chain tension adjustment knob】The knob is designed to be enlarged, and the screw can be automatically adjusted by loosening the screw slightly before adjustment, and it should not be too tight..
- 【Easy to Modify】The angle grinder drill attachment is an easy-to-operate tool that allows users to replace the angle grinder with a chainsaw. This allows the user to easily switch between the angle grinder and the chainsaw. With this retrofit kit, you don't need to buy a new chainsaw, just spend a little time retrofitting, saving you money and time..
- 【Easy to use】One angle grinder has been developed for two purposes, and the idle angle grinder can also be rejuvenated..
Check StockBaby Trend Trooper 3 in 1 Convertible Car Seat
- 3 modes of use: rear facing infant mode (4-18lbs), rear facing toddler mode (18-40lbs), and forward facing toddler mode (22-65lbs).
- Immediate right installation angle: rear-facing recline flip foot allows for great installation angles with ease.
- The built-in bubble level indicator helps find the correct angle.
- Fits three across: at its widest, the Trooper is 16.75" Allowing it to fit 3 ACROSS in most vehicles.
- Lightweight: lightweight shell also allows for use of latch Installation up to 55 lbs.
- Shoulder & crotch buckle adjustment: 5-position shoulder height adjustment and 3- position crotch buckle for seat adjustment.
Check Stock
SIRUI Camera Tripod Ball Head, 10KG/22.05lbs Loading Capacity, 360°Panning Base, Aluminum Build Quality, Safety Lock, Universal Mounting Plate for Easy Attachment (B-00K Ball Head)
- Panoramic Photography: With 360°panorama base, the ball head can be rotated flexibly at different angles to meet different shooting needs including panoramic photography..
- Flexible Angle Adjustment: With independent locking knobs and fine damping mechanism, photographers can adjust shooting angle flexibly in seconds..
- Wide Compatibility: B-00K is Arca-swiss compatible. It can be attached to different photographic devices with 1/4" standard screw on the plate and can be connected to tripods and monopods with 3/8” screw hole at the bottom..
- Stability: B-00K ball head can support camera up to 10KG/22.05lbs with durable material and scientific mechanism..
- Safety Lock: SIRUI advanced locking system, (consisting of base lock, main lock, plate lock and safety lock) offers increased stability and flexible angle adjustment..
- Aluminum Material: Manufactured with high-quality Aluminum, SIRUI B-00K ball head is durable and corrosion-resistant..
- Non-slip Design: Anti-slip mats covering on the universal plate are included to prevent cameras from sliding off..
- Precision: A 10°graduated scale is included for easy and precise adjustment..
- Ergonomic Locking Knob: A large ergonomic main locking knob is provided for fast and easy angle adjustment..
Check StockMAPEX Cymbal Stand (B800)
- The Super- Glide Step less cymbal tilters allow for fine adjustment of cymbal angle..
- Mars Double Braced Medium Weight 2 Tier Boom with Ratchet Tilter - Black Plated.
Check Stock
