Categories

Best Angle Degree Gauge

Alltooetools 1/2 Inch Torque Wrench Angle Gauge Tool SF0136

  • Measures angle of rotation after pre-torque in torque-angle application..
  • 1/2" male & female square drive and an adjustable holding rod hold the gauge in position during use..
  • 360 degree scale is marked at 2 degree increments & intervals of 10 degree and 30 degree..
  • Easily zeroed for next application by turning the tool housing..
  • Package includes torque wrench adapter gauge and adjustable holding rod.
  • Holding rod features 2 lengths for flexibility and reach..
Check Stock

POWERTEC 71143 Deluxe Miter Gauge for Table Saw | Miter Guide with 120 Angle Stops

  • Function: a high performance woodworking angle tool that possesses a miter guide which mounts into the miter slots of your table saw (band saws and other applications) and then guides the miter gauge parallel to the blade for high precision angled and crosscuts.
  • Features: a lightweight design with a durable laser-cut aluminum construction, Large gauge handle, universal fence mounting bracket pivoting locking mechanism, A removal plate that allows the miter gauge to be used with t-slotted and non t-slotted miter slots, and adjustable Expansion discs that remove all side play from the bar, creating a perfect fit.
  • Precision: angle guide (with 120 total angle stops) in 5 degree increments over a full 180-degree range, and allows for plus or minus 60-degree range miter cuts.
  • Universal design:suited for most standard miter slots (3/4” width x 3/8” depth) with or without T-slots, making it compatible with popular Brand table saws, band saws, Router tables, disk and belt sanders.
Check Stock

Drill Angle Gauge, 3Pcs Drill Bits Angle Gauge Set Dirll Sharpener Tools S/S Angle Measuring Gage Drill Bit Angle (60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 °, 160 °)

  • 【Material】: This Angle gauge set is made of high quality stainless steel, high hardness, and durable in use..
  • 【Design】: It is a practical Angle gauge set in drill bits Angle measuring and drill sharpener inspection,and comes with a case, convenient for carrying out..
  • 【Feature】: Diameter drill front edge of the protractor 50 gauge 118 ° apex angle of twist drills grinding gauge suitable for 118 ° apex diameter of not more than 50mm of grinding twist drills..
  • 【Drill Apex Angle】: Check the drill apex angle (60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 °, 160 °). Cutting tool angle is 60 degrees for a tooth-shaped angle 55 degree angle and metric thread, inch thread inspection, blade and special measuring tools for measuring angles.
  • 【Usage】: Suitable For: Angle measurement.
Check Stock

POWERTEC 71142 Universal Table Saw Miter Gauge Assembly/Miter Gauge with 27 Angle Stops

  • FUNCTION: A high performance woodworking angle tool that possesses a miter guide which mounts into the miter slots of your table saw (band saws and other applications) and then guides the miter gauge parallel to the blade for high precision angled and crosscuts.
  • FEATURES: A lightweight design with a durable laser-cut aluminum construction, large gauge handle, universal fence mounting bracket, pivoting locking mechanism, a removal plate that allows the miter gauge to be used with T-slotted and non T-slotted miter slots, and adjustable expansion discs that remove all side play from the bar, creating a perfect fit..
  • PRECISION: Angle guide with 27 total locking stops in 5 degree increments over a full 180-degree range, and allows for plus or minus 60-degree range miter cuts.
  • UNIVERSAL DESIGN: Works with most Contractor style, full sized saws, or tools with standard miter slots (3/4” width x 3/8” depth) with or without T-slots, making it compatible with popular brand table saws, band saws, router tables, disk and belt sanders. PLEASE NOTE : will not work with smaller saws or tool with 5/8” miter slots..
Check Stock

DeWalt 5140032-78 Replacement Table Saw Miter Gauge

  • The purpose of a miter gauge is to allow user to position and safely guide the workpiece. This replacement miter gauge is simple to install, which minimizes downtime..
  • The miter gauge only fits DeWalt DWE 7490X Type 1, DWE 7490X Type 2, DWE 7491RS Type 1, DWE 7491RS Type 2, WE 7499GD Type 1, DWE 7499GD Type 2.
  • The miter bar swize is 22.5mm x 9.2mm x 300mm(W x H x L)..
  • There are lines for every one angle on miter gauge body, including larger lines at the five degree marks( 30, 45, 60, 75 and 90 ).This allows you to adjust the miter gauge to any angle you need..
Check Stock

Car Inclinometer Level, Outdoor Multifunction Car Inclinometer Equipment Angle Slope Meter Balancer Luminous High Precise Car Compass Clinometer Indicator Level Meter Digital for Dashboard car inclin

  • ...alled in any position, as long as you can maintain a balance. Easy and practical to use. Adjustable mounting bracket is designed for easy direction and data reading..
  • Application: This Slope Balancer is great for car use. Car Inclinometer Equipment,Luminous sphere, internal LED light, perfect for night driving..
  • High Degree of Sensitivity : Car Inclinometer Level Tilt Gauge provides a high degree of sensitivity to measure slope and inclination. Accurately show the exact degree of downhill and uphill..
  • Professional Design: Ergonomic design and fine workmanship, help you to learn road conditions, and increase traffic safety, with free rotation, viewing angle is adjustable..
  • Easy to Use: The adjustable stand can be installed in any position, as long as you can maintain a balance. Easy and practical to use. Adjustable mounting bracket is designed for easy direction and data reading..
  • High Quality Material: Car Angle Slope Meter is made of qualified ABS material, solid, firm and durable to use, and durable for long service life..
  • High Degree of Sensitivity : Car Inclinometer Level Tilt Gauge provides a high degree of ....
Check Stock

75x25x36 AP30 Stainless Steel Angle Gauge Precision Micro Block Milling Adjustable Angle V Block Milling

  • 【PREMIUM STAINLESS STEEL】Our angle v block milling is made of high-quality stainless steel. This angle gauge has the advantages of surface hardening and durability.
  • 【NICKEL PLATED WORKING FACE】We carry out nickel plating treatment on the working surface of each degree angle plate angle, and the parallelism and perpendicularity of the rust removal of this adjustable angle v block are finely ground to 0.01mm.
  • 【FIXED ANGLE PROCESSING】This precision gauge can use the cursor to indicate the stepless tilt adjustment angle, and then fix it with screws to make various fixed angle processing and inspection workpieces.
  • 【ANGLE V BLOCK】The corner V-shaped block has the characteristics of high precision and easy operation. This micro v block milling can meet your various work needs.
  • 【WIDELY USED】This high precision angle gauge uses adjustable angle grinders and adjustable blades on milling machines, planers, and drilling machines. After the workpiece is processed, this stainless steel block milling crosses or clamps the workpiece with other fixtures, such as processing inclined planes, inclined hole drilling, etc.
Check Stock

Morse Cutting Tools 31540 Adjustable Round Fractional Split Dies, High-Speed Steel, Bright Finish, 1-1/2\ Outside Diameter, 1/2\ Thick, 5/16\

  • Twist Drill Angle Gauge Grinding Drill Bits Diameter Center Gauge Sharping Tools.
  • Drill bit angle gauge for measuring drill bit 118 degree.
  • Made of stainless steel, not easy to rust and bend.
Check Stock

Black Bolt Gauge SAE Metric Check a Thread Size FastenerLine 901303

  • 29° ACME Thread Gauge-The 29 degree stainless steel acme thread gauge is a single piece type and it is applied to measure thread and external thread tooth pitch.The acme thread gauge range:1-10TPI,the pitch:1,1-1/3,1-1/2,1-3/4,2,2-1/2,3,4,5,6,7,8,9,10.
  • Suitable for-Standard gauge for check the angle of screw cutting tools,check the width of screw cutting tools and set the position of screw cutting tools.
  • Material of stainless steel-This acme thread gauge is made by stainless steel.Not easy to rust and not easy to bend.You needn’t to use anti-rust oil or take any anti-rust ways.Just put the 29 degree acme thread gauge in a dry place and it won’t rust.
  • Clear scales-All the scales on the acme screw gauge are laser engraving,not painting and the acme thread gauge is not the copy of laser engraving. Don’t worry about the long friction will make the scale unclear.
  • Quality after-sale Service- If you are experiencing quality issues or any problems when you receive this acme thread gauge, please feel free to contact our customer service in time and let us know the issue. We offer further solution for you to your satisfaction.
Check Stock

GEARWNCH 1/2\ Drive Electronic Torque Wrench 30-340 Nm -85077

  • 1/2 inch torque wrench angle gauge tool, suitable for many new engines using torsion yield fasteners..
  • The 360 degree scale is marked in 2 degree increments of 10 degrees and 1 interval of 30 degrees.
  • Turn the tool housing to easily reset it to zero for the next use.
  • The adjustable arm keeps the angle scale fixed..
  • Male and female square drivers with 1/2 inch.
Check Stock

PREXISO Angle Gauge Magnetic, Angle Finder - Digital Level Electronic, Protractor Angle Cube Inclinometer for Woodworking, Table Saw, Construction, Masonry, Machinery, 0-360° Bright Backlit Display

  • 2 Measurement Modes & 4 Units – Turn on the equipment to directly enter the ABSOLUTE measurement mode, and press the ZERO button to switch to the RELATIVE measurement mode.
  • This equipment fast measurement displays angles in degrees, %, mm/m and IN/FT.
  • Magnetic V Groove Base & Auto Reversible Display – The pocket angle finder features sturdy V groove edges, a strong magnetic base.
  • When upside down, the LCD display with backlight auto rotates, ensure fast and clear reading.
  • TIPS: If the angle gauge is used in an incorrect position (tilts diagonally over 30 degree), screen display ERROR to remind users to use correctly.
  • Accurate Angle – This angle finder tool measures, sets angles, and if a surface is level.
  • PREXISO angle gauge has higher resolution of 0.05°and higher accuracy of ±0.1°at 0°and 90 °, and ±0.2°at other angles.
  • The measuring range is 0 to 360° (4×90°), buzzer will alert when it’s within ± 1° to the horizontal or vertical position.
  • Compact Design & Calibration Function – Mini angle gauge fits in your pocket or the storage bag that comes included to protect the equipment surface from wear.
  • The equipment has been calibrated in the factory. In order to ensure lasting accuracy, the equipment also has calibration function, so ....
Check Stock

Precision Miter Gauge, Kolvoii Table Saw Miter Gauge with 120 Degree Angled Ends, Craftsman Woodworking Tools for Table Saw, Band Saw, Router Table

  • 【Precise Angle Cutting】It features 27 angle indexing stops with 5-degree step spacing and Dial allows between 90 to 30 degrees of angle adjustment while the protractor head features positive stops at 0, 10, 22.5, 30, 45, 60, 67.5, and 90 degrees (both left and right). When you want to cut a more complicated angle, the gauge dials to precise angles as the adjustable scale..
  • 【Perfect for Wood Cutting】It can be used for table saws, band saws, router tables, etc. both sides 60 angle adjustable, ideal for crosscutting wood at a specific angle. once the gauge is set, the precise cross cutting angles that you have even more control over the workpiece you are cutting. the fence comes with a flip stop that makes repetitive cuts a breeze..
  • 【Simple Operation】 3/4-inch (19mm) miter gauge groove fits most standard 3/4-inch table saw slots (measure slot on your table saw to ensure exact fitment).
  • The slide bar has a locking washer that fits snugly into the track with a matching groove.
  • Simply slide the flip stop to the exact position you need it to be, lock it in place and you’re ready to go..
  • 【Premium Material】 This woodworking tool is made of alluminium alloy. Protractor gauge head constructed from solid steel that is accurately machined square to....
Check Stock

Necygoo Weld Gauge Set Stainless Steel 0-60mm Cam Type Gauge and 3.2mm-25.4mm 1/8''-1'' Weld Fillet Gauge with Bag Imperial Metric Measurement Welding Gauge

  • ❤WELD GAUGE SET❤ Package Includes 1 x Cam Type Gauge, 1 x Weld Fillet Gauge, 2 x Instructions, 2 x Bags. This Weld Gauge, with Imperial Metric Measurement, is Suitable for Measuring Length, Height, Width and Angle for Welding..
  • ❤CAM TYPE GAUGE❤ Linear Measure Range: 0-60mm (0-2 in), Curving Measure Range: 0-20mm (0-1 in), Angle Measure Range: 0-60 Degree..
  • ❤WELD FILLET GAUGE❤ Metric Measure Range: 3mm, 4mm, 5mm, 6mm, 8mm 9mm, 10mm, 11mm, 12mm, 14mm, 16mm, 19mm, 22mm and 25mm While Accuracy is Less Than +/- 0.5mm. Imperial Measure Range: 1/8” (3.2mm), 3/16” (4.8mm), 1/4” (6.4mm), 5/16” (7.9mm), 3/8” (9.5mm), 7/16” (11.1mm), 1/12” (12.7mm), 5/8” (15.9mm), 3/4” (19.1mm), 7/8” (22.2mm) and 1” (25.4mm) While Accuracy is Less Than +/- 1/50” ..
  • ❤STAINLESS STEEL GAUGE❤ Both Gauge Are Made of Stainless Steel, Which is Very Durable and Won’t Be Bended Easily. With Smooth Surface and Clear Scale (Please Be Careful for The Sharp Edge When Use)..
  • ❤PACKAGE❤ Package Includes A Cam Type Gauge, A Weld Fillet Gauge and Manual. If You Have Any Question, Please Contact Us..
Check Stock