Categories

Best Angle Grinder Arbor Extension

Pomsare Upgraded 3PCS Wood Carving Disc Set for 4\ or 4 1/2\ Angle Grinder with 5/8\ Arbor, Grinding Wheel Shaping Disc for Wood Cutting, Grinder Cutting Wheel Attachments

  • [Upgraded Design] After checking all the complaints of grinding disc set, our engineer upgraded the center hole diameter to be compatible with 4" and 4 1/2" angle grinder. The grooves of the wood grinder wheel has been enlargerd to fit widely used 1.61" black flange nut. So all the parts work right out of the box..
  • [Fit 4" or 4 1/2" angle grinders with 5/8" & 7/8" Arbor] The angle grinder attachments set includes 3 piece of wood grinding wheel (4" dia × 7/8" bore), 3 piece of silver bushing(7/8" to 5/8"). Designed to be used in all standard 4" or 4 1/2" angle grinders with 5/8" as well as M10 arbor, such as Makita, Bosch, Dewalt, Black & Decker, Milwaukee, Hitachhi & more..
  • [Cope with Different Occasions] Hundreds of aggressive teeth of the wood grinder wheel can remove paint residue and rotted wood to smooth the surface of old furnitures. More durable than hundreds of sandpapers, save energy and improve work efficiency..
  • [Practical Woodworking Tools] With rapid polishing and grinding speed, the grinder shaping disc is great for non-metallic materials, suitable for soft and hard wood, chipboard, laminate even plastic, without worrying about kickback. Ideal for grinding, sculpting, carving, and removing small tree stumps..
Check Stock

GRAFF Diamond Blade for Angle Grinder - Diamond Cutting Wheel for Cutting Stone, Marble, Granite, Brick, Masonry, Paving Flag, Concrete - Diamond Saw Blades Segment Height 0.394” (10 mm) - 5 inches

  • UNIVERSAL - 5" Diamond blade for angle grinder is designed for domestic use and DIY. GRAFF segmented diamond cutting wheel is intended for working with Stone, Marble, Granite, Brick, Masonry, Paving Flag, Concrete & Curb. Our 5" angle grinder concrete blade can be used both for dry and wet cutting..
  • INCREASED OPERATING TIME - Diamond blade for angle grinder is constructed so that during operation it heats up more slowly which leads to an increase in operating time..
  • DURABLE - Diamond angle grinder blade GRAFF can self-sharpen by erasing diamond grits during operation. For sharpening it is needed to make two or three cuts on silicon or abrasive stone..
  • HIGH SOLIDITY - Diamond blade for granite and stone is designed for precise cutting of concrete using small-sized angle grinders with 7/8” Arbor. This saw blade has a frame made of improved steel which ensures high solidity during operation..
  • SPECIFICATIONS - GRAFF concrete diamond blade 5 has teeth with soldered diamond segments all around. Diameter: 5 Inch (125 mm), Arbor: 7/8 Inch (22.23 mm) with 5/8 Inch (15.88 mm) Adapter, Cutting width: 0.079 Inch (2 mm), Segment height: 0.394 Inch (10 mm), Segments number: 9. Diamond concrete saw blade has a tough body with 0.047 Inch (1.2 mm) thickness..
Check Stock

EMILYPRO Shaft Arbor Extension 1/2  and 5/8 / Motor Arbor Threaded Shaft Adapter for Buffing Grinding Wheels / Fit for Bench Grinder - Right 1 Pack

  • 【Function】This Shaft Arbor Extender is designed to convert 1/2" or 5/8" shaft electric motor to 1/2" threaded shaft buffing machine, or transfer....
  • 【Application】This Electric Motor Arbor Threaded Shaft Adapter suitable for mounting Buffing wheels, Polishing wheels, Grinding Wheels, Wire brush....
  • 【Using Method】To Attach the tube side to your motor arbor or bench grinder shaft, fasten the hidden screw to make it fastness, use the 2pcs....
  • 【Advantage】Making your Motor like a transformer, which is cost saving. just a small Motor arbor shaft extension adapter can create a new grinder....
  • 【Dimension】Tube side OD x ID x L：7/8" x 5/8" x 1-5/8".
Check Stock

GRAFF 6 Inch Diamond Blade for Angle Grinder - Diamond Cutting Wheel for Cutting Stone, Marble, Granite, Brick, Masonry, Paving Flag, Concrete - Turbo Diamond Saw Blades - 150 mm

  • UNIVERSAL: Diamond blade for angle grinder is designed for domestic use and DIY. GRAFF turbo cutting disc is intended for working with concrete, artificial stone, paving flag and kerb..
  • INCREASED OPERATING TIME: Diamond blade for angle grinder is constructed so that during operation it heats up more slowly which leads to an increase in operating time..
  • DURABLE: Diamond angle grinder blade GRAFF can self-sharpen by erasing diamond grits during operation. For sharpening it is needed to make two or three cuts on silicon or abrasive stone..
  • HIGH SOLIDITY: Diamond blade for ceramic and tile is designed for precise cutting using small-sized angle grinders with 22.23 mm Arbor. This saw blade has a frame made of improved steel which ensures high solidity during operation..
  • SPECIFICATIONS: Diameter: 6 Inch (150 mm), Arbor: 7/8 Inch (22.23 mm) with 5/8 Inch (15.88 mm) adapter, Kerf: 0.098 Inch (2.5 mm), Segment height: 0.394 Inch (10 mm). Diamond concrete saw blade has a tough body with 0.055 Inch (1.4 mm) thickness..
Check Stock

GRAFF 4 Inch Diamond Blade for Angle Grinder - Diamond Cutting Wheel for Cutting Stone, Marble, Granite, Brick, Masonry, Paving Flag, Concrete - Turbo Diamond Saw Blades - 105 mm

  • UNIVERSAL: Diamond blade for angle grinder is designed for domestic use and DIY. GRAFF turbo cutting disc is intended for working with concrete, artificial stone, paving flag and kerb..
  • INCREASED OPERATING TIME: Diamond blade for angle grinder is constructed so that during operation it heats up more slowly which leads to an increase in operating time..
  • DURABLE: Diamond angle grinder blade GRAFF can self-sharpen by erasing diamond grits during operation. For sharpening it is needed to make two or three cuts on silicon or abrasive stone..
  • HIGH SOLIDITY: Diamond blade for ceramic and tile is designed for precise cutting using small-sized angle grinders with 22.23 mm Arbor. This saw blade has a frame made of improved steel which ensures high solidity during operation..
  • SPECIFICATIONS: Diameter: 4 Inch (105 mm), Arbor: 7/8 Inch (22.23 mm) with 5/8 Inch (15.88 mm) adapter, Kerf: 0.091 Inch (2.3 mm), Segment height: 0.394 Inch (10 mm). Diamond concrete saw blade has a tough body with 0.047 Inch (1.2 mm) thickness..
Check Stock

GRAFF 4 ½ Inch Diamond Blade for Angle Grinder - Diamond Cutting Wheel for Cutting Stone, Marble, Granite, Brick, Masonry, Paving Flag, Concrete - Turbo Diamond Saw Blades - 115 mm

  • UNIVERSAL: Diamond blade for angle grinder is designed for domestic use and DIY. GRAFF turbo cutting disc is intended for working with concrete, artificial stone, paving flag and kerb..
  • INCREASED OPERATING TIME: Diamond blade for angle grinder is constructed so that during operation it heats up more slowly which leads to an increase in operating time..
  • DURABLE: Diamond angle grinder blade GRAFF can self-sharpen by erasing diamond grits during operation. For sharpening it is needed to make two or three cuts on silicon or abrasive stone..
  • HIGH SOLIDITY: Diamond blade for ceramic and tile is designed for precise cutting using small-sized angle grinders with 22.23 mm Arbor. This saw blade has a frame made of improved steel which ensures high solidity during operation..
  • SPECIFICATIONS: Diameter: 4 ½ Inch (115 mm), Arbor: 7/8 Inch (22.23 mm) with 5/8 Inch (15.88 mm) adapter, Kerf: 0.098 Inch (2.5 mm), Segment height: 0.394 Inch (10 mm). Diamond concrete saw blade has a tough body with 0.047 Inch (1.2 mm) thickness..
Check Stock

Pomsare Angle Grinder Wood Carving Disc Grinding Wheel, Attachments Wood Cutting Wheel Shaping Disc, Wood Shaper for Angle Grinder 4 1/2 inch with 5/8 & 7/8 Arbor

  • [Upgraded Design] After checking all the complaints of grinding disc set sold on Amazon, our engineer upgraded the center hole diameter to be compatible with 4" and 4 1/2" angle grinder. The grooves of the wood carving disc has been enlarged to fit widely used 1.61" black flange nut. So all the parts work right out of the box..
  • [Fit 4" or 4 1/2" angle grinders with 5/8" Arbor] While considering safety, this combination increases diversity. Suitable for novice woodworking enthusiasts. The angle grinder attachments include 4 piece of wood grinding wheel, 2 piece of silver bushing. Designed to be used in all standard 4" or 4 1/2" angle grinders with 5/8" as well as M10 arbor, such as Makita, Bosch, Dewalt, Black & Decker, Milwaukee, Hitachhi & more..
  • [Cope with Different Occasions] Hundreds of aggressive teeth of the grinder disc can remove paint residue and rotted wood to smooth the surface of old furnitures. More durable than hundreds of sandpapers, save energy and improve work efficiency..
  • [Practical Tool Set] With rapid cutting and grinding speed, the wood grinding wheel shaping disc is great for non-metallic materials, suitable for soft and hard wood, chipboard, laminate even plastic, without worrying about kickback. The wood shaper can be used as stu....
Check Stock

SALI 5pcs Diamond Concrete Grinding Wheel 4 1/2 inch for Polishing and Cleaning Stone Surface Cement Marble Rock Granite and Thinset Removing Angle Grinder Segment Wheels Cup 115 * 22.2MM

  • The package includes: 1: 5pcs diamond grinding wheels: Size：Diameter of Grinding Wheel: 115mm (4.5 inch) Arbor diameter : 22.23mm ( 7/8 Inch) Wideness of Gear: 20mm(0.787 inch) 2 : 6 adapters: size:arbor 20mm(0.878 inch) *3 ,arbor 16mm(5/8 inch)*3.
  • Segment Turbo Row Segmented Diamond Cup Wheel are designed for grinding concrete and fieldstone, it's an ideal concrete grinding wheel 4 1/2 inch for angle grinder..
  • Hole design: The angle grinder concrete grinding wheel features air holes designed to aid in maintaining and cooling the cutting pattern and reducing wear.
  • Application: Our diamond grinder wheel is used for dry/wet grinding all types of stone like concrete, granite, stone, marble, tile, cement , masonry, and some other construction material to smooth uneven surfaces and remove flashing.can also be used for the removal of glues and epoxies..
  • Made of Durable 65Mn,Diamond and metal powder,high-quality brazed Double row segments diamond grinding cup wheel for fast and smooth grinding use on both wet or dry surfaces..
Check Stock

SALI 5pcs Diamond Concrete Grinding Wheel 4 1/2 inch for Polishing and Cleaning Stone Surface, Cement, Marble, Rock, Granite, and Thinset Removing, Angle Grinder Segment Wheels Cup 115 * 22.2MM

  • The package includes: 1: 5pcs diamond grinding wheels: Size：Diameter of Grinding Wheel: 115mm (4.5 inch) Arbor diameter : 22.23mm ( 7/8 Inch) Wideness of Gear: 20mm(0.787 inch) 2 : 6 adapters: size:arbor 20mm(0.878 inch) *3 ,arbor 16mm(5/8 inch)*3.
  • Segment Turbo Row Segmented Diamond Cup Wheel are designed for grinding concrete and fieldstone, it's an ideal concrete grinding wheel 4 1/2 inch for angle grinder..
  • Hole design: The angle grinder concrete grinding wheel features air holes designed to aid in maintaining and cooling the cutting pattern and reducing wear.
  • Application: Our diamond grinder wheel is used for dry/wet grinding all types of stone like concrete, granite, stone, marble, tile, cement , masonry, and some other construction material to smooth uneven surfaces and remove flashing.can also be used for the removal of glues and epoxies..
  • Made of Durable 65Mn,Diamond and metal powder,high-quality brazed Double row segments diamond grinding cup wheel for fast and smooth grinding use on both wet or dry surfaces..
Check Stock

Angle Grinder Attachment M14 Adapter 5/8 inch 11 Female to M14 Male 12,000 RPM Rated Wire Wheel Drill Adaptor Compatible with Dewalt, Makita, Milwaukee, Hitachi, Ryobi Tools

  • Heavy-duty, solid steel, commercial grade adapter for using a European attachment (Metric 14) on North American 5/8"-11 angle grinder, grinder saw, concrete angle grinder. 12,000 RPM rated. Female side is 5/8"-11 and male side is M14 threaded. Mortar rake adapter.
  • M14 side is 0.75 inch long. You can use M14 Threaded Mortar Rake, Diamond Tools, masonry hole saw, drill grinder attachment, polishing rake, polisher attachment, diamond wire saw, hole saw drill attachment with your standard American 5/8" 11 threaded power tools..
  • This wheeler angle grinder drill chuck adapter has a water hole in the center for cooling diamond tools, diamond hole saw, diamond core drill bits..
  • If you have a 5/8"-11 standard North American power tool, this american to european adapter will help you use M14 (metric 14) a female threaded wheel polisher drill attachment, diamond core drill bit, hole drill attachment, angle grinding wheel, angle grinder polisher..
  • Standard small hand polisher can utilize this angle grinder arbor adapter or M14 drill adapter for a polishing spindle, metric hole saw, mortar rake..
Check Stock

Angle Grinder Extension Shaft Set, 80 mm ,120 mm,5/8"-11 Thread Connecting Rod for 4-1/2 Angle Grinder ,Rotary Polisher,Car Polisher,45# Steel Material, Seamless Docking, Easy Installation

  • Angle Grinder Extension Connecting Rod Size: 【Important】Before buying, please check the size, Fit for a spindle size of 5/8" - 11" and FIT FOR MOST 4-1/2"-5" Grinding Wheels, Inner thread 5/8" - 11", Outer thread 5/8" - 11",Overall length 75mm (2.95nch).
  • Great for Deep Areas: The rotating extension shaft to use conveniently with 5/8" 11 threaded power tools. Can be used for grinding and polishing deep stones such as inside corners and special shapes..
  • Easy To Install: ①Install the extension rod ②install the Grinder Inner Flange Nut ③install the Grinding Wheels ④install the Grinder Outer Flange Nut ⑤use the Spanner to fix the Grinder Outer Flange Nut..
  • Material: Made of high quality black carbon steel, more strength and resistance to deformation.The 2022 upgrade model improves the shortcomings of the previous product's shaking..
  • Function: By using the Angle grinder extension connecting rod, the functionality of the angle grinder can be expanded and a foundation can be laid for using other attachments..
Check Stock

Makita X-Lock 4-1/2 inches Continuous Rim Diamond Blade For Ceramic And Granite Cutting

  • For use with Makita X-LOCK Angle Grinder models XAG25, XAG26, GA4570 and angle grinders with a 7/8 inches arbor.
  • Up to 4x longer life than competitive blades.
  • X-LOCK quick change system provides up to 5X faster blade changes vs. standard angle grinder mount.
  • X-LOCK quick change system allows for easy tool-free blade changes by simply pulling the release lever on the X-LOCK grinder.
  • Continuous rim contact with material delivers a finer finish than segmented or turbo rim blades.
Check Stock

Makita X-Lock 4-1/2 inches Turbo Rim Diamond Blade For Masonry Cutting, 2/pk

  • For use with Makita X-LOCK Angle Grinder models XAG25, XAG26, GA4570 and angle grinders with a 7/8 inches arbor.
  • Up to 4x longer life than competitive blades.
  • 50% taller (13mm) segments with an optimum bond matrix are designed for longer life and faster, smoother cutting.
  • X-LOCK quick change system provides up to 5X faster blade changes vs. standard angle grinder mount.
  • X-LOCK quick change system allows for easy tool-free blade changes by simply pulling the release lever on the X-LOCK grinder.
Check Stock