Categories

Best Angular Ball Bearing

MOCHU 725 725C/P5 5x16x5 Angular Contact Ball Bearing, ABEC-5, 15° Contact Angle, Metric, 5mm ID, 16mm OD, 5mm Width, Single Row, Open

  • Double-row angular contact ball bearing, supporting moderate combined radial and bidirectional thrust loads.
  • Ball contact angle of 20 degrees relative to the inner and outer raceways increases thrust load capacity.
  • Rubber seals on both sides of the bearing to keep lubricant in and contaminants out.
  • Pressed steel cage evenly spaces balls for reduced friction, vibration, and noise.
  • Normal axial internal clearance for applications where thermal expansion is not a factor.
Check Stock

M30 IPE KV100 Pro V2.0 MAD COMPONENTS Drone brushless Motor for Heavy Multirotor Quadcopter Hexrcopter RC DIY

  • More efficient and drawing more power than equivalent motors in the market.
  • Precise manufacturing workmanship, perfect winding, absolutely compete with top brands.
  • This large drone brushless motor was designed for rigorous conditions and endurance flight, IP44.
  • 1 x Double row angular contact ball bearing 1 x Tapered Roller Bearing,Over-sized durable bearings for increased life, durability Support 12-16S.
  • Pay attention the extened wire =70mm. high end heavy lift industrial drone use, max thrust 49kg @60V with 40in prop..
Check Stock

3001-2RS Bearing Angular Contact Sealed 12x28x12 Ball Bearings VXB Brand

  • 003cp003eStatic Load Capacity - 2000 lb.003c/p003e003cp003eDynamic Load Capacity – 3100 lb. 003c/p003e.
Check Stock

uxcell 3204-2RS Angular Contact Ball Bearing 20x47x20.6mm Sealed Bearings 5204-2RS

  • Low maintenance design for Problem free operation.
  • Angular bearing contact allows for outstanding durability while supporting both Radial and axial loads.
  • Available in wide variety of types, designs, sizes, and materials.
  • Quality you can Count on. SKF has been making ball bearings for over 100 years.
Check Stock

SUNEX 66037 3.5T FLOOR JACK STEEL RAPID RISE

  • Rapid Rise Technology with dual pump pistons raises the saddle to maximum height in only six pump strokes..
  • Overload and bypass safety valves prevent the jack from being used beyond its rated capacity and over extension of the ram..
  • Strong chassis with upper and lower frame flanges to withstand twisting..
  • Wide front wheels and ball bearing mounted rear caster wheels for stability and easy maneuverability..
  • Angular positioned pump pistons provide maximum effective pump stroke when jack is completely under a vehicle..
Check Stock

uxcell PHSB8 Rod End Bearing 1/2-inch Bore Pre-Lubricated Bearing 1/2-20 Female Thread Right Hand

  • Type: 1/2" Hole x 1/2-20 right-hand female thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensure long service life..
  • Capacity: 19KN Static Load Capacity, 15KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

uxcell POSB8 Rod End Bearing 1/2-inch Bore Pre-Lubricated Bearing 1/2-20 Male Thread Right Hand

  • Type: 1/2" Bore x 1/2-20 right-hand male thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 19KN Static Load Capacity, 15KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

uxcell PHSB6 Rod End Bearing 3/8-inch Bore Pre-Lubricated Bearing 3/8-24 Female Thread Right Hand

  • Type: 3/8" Bore x 3/8-24 right-hand female thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

uxcell PHSB6 Rod End Bearings 3/8-inch Bore Pre-Lubricated Bearings 3/8-24 Female Thread Right Hand 2pcs

  • Type: 3/8" Bore x 3/8-24 right-hand female thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

uxcell PHSB6 Rod End Bearings 3/8-inch Bore Pre-Lubricated Bearings 3/8-24 Female Thread Left Hand 2pcs

  • Type: 3/8" Bore x 3/8-24 left-hand female thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

uxcell POSB4 Rod End Bearings 1/4-inch Bore Pre-Lubricated Bearings 1/4-28 Male Thread Right Hand 2pcs

  • Type: 1/4" Bore x 1/4-28 right-hand male thread rod end. Maximum angular misalignment: 13 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 6.6KN Static Load Capacity, 4.5KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

Bailey Universal Joint Assemblies (Standard Series) - Universal Joint with Relubricable Bearings - Standard U Joint, 7/8’’ x 7/8’’ ID, 3/16’’ Keyway, 1000 RPM, 5” Overall Length, 2.5 lb, 133015

  • SPECIFICATIONS: This 1 universal joint is a standard rod end ball joint with 7/8’’ x 7/8’’ inner diameter, 3/16’’ keyway, and 1000 RPM. It allows a maximum deflection of 90 degrees and is 5 inches long. Our ball joint weighs 2.5 lb..
  • HIGH SPEED: Our robust Cardan joint can withstand a maximum torque of 800 lb-inches at a consistent speed of 1000 RPM. This universal joint assembly is best suited for high-speed, high torque operations..
  • TOUGH: With simple but precise construction, this U Joint from Bailey is capable of coupling laterally dissonant shafts. It reduces side thrust on bearing bushings, protecting them from damage even when subjected to long-term use..
  • FLEXIBLE: This standard rod ends ball joint allows up to 15% angular displacement at peak velocity. The universal ball rod assembly facilitates easy Up/Down movement of the drive shaft in automobile, industrial, and commercial applications..
  • MADE TO LAST: These universal joints have radical drop-forged slip yokes along with relubricable needle bearings. They are resistant to everyday wear and tear, have exceptional tolerance of high torques, and are built to go the mile..
Check Stock

Fuel Vavle Petcock Shut Off Tank Switch for Honda TRX 250EX 350 400 420 Rancher TRX400 450 500 Foreman Recon 250 Rubicon 500 650 Replaces OEM # 16950-HM8-003

  • 【Fitment】Fit for Honda ATV ▶ Foreman 500 TRX500FE/FM/FPE/FPM 2005-2013 ▶ Rubicon 500 TRX500FA/FGA/FPA 2001-2014 ▶ Rincon 650 TRX650FA/FGA 2003-2005 ▶ Foreman 400 4x4 TRX400FW 1995-2003 ▶ Foreman 450 ES/S TRX450FE/FM 1998-2004 ▶ Rincon 680 TRX680FA/FGA 2006-2023.
  • 【Feature & Material】Bearings are using long-lasting steel as material, which ccould decrease abnormal noise, body shake and keep driving safty if you replace regularly. Seals are made of durable rubber, it can prevent water, dust and sand entering your bike interior..
  • 【OEM#】91256-HM7-003 91051-HA7-651 91209-HN2-003..
  • 【Repalcement OEM#】91256-HP0-A01 94520-55000 91263-HA7-771.
  • 【What You Get】Bearing / Angular Ball (30x54x24) x 2.
Check Stock