Best Angular Bearing

3001-2RS Bearing Angular Contact Sealed 12x28x12 Ball Bearings VXB Brand

  • 003cp003eStatic Load Capacity - 2000 lb.003c/p003e003cp003eDynamic Load Capacity – 3100 lb. 003c/p003e.
Check Stock

MOCHU 725 725C/P5 5x16x5 Angular Contact Ball Bearing, ABEC-5, 15° Contact Angle, Metric, 5mm ID, 16mm OD, 5mm Width, Single Row, Open

  • Double-row angular contact ball bearing, supporting moderate combined radial and bidirectional thrust loads.
  • Ball contact angle of 20 degrees relative to the inner and outer raceways increases thrust load capacity.
  • Rubber seals on both sides of the bearing to keep lubricant in and contaminants out.
  • Pressed steel cage evenly spaces balls for reduced friction, vibration, and noise.
  • Normal axial internal clearance for applications where thermal expansion is not a factor.
Check Stock

Enduro ABEC-5 Angular Contact Bearing, 71903 17X30X7-71903 LLB

  • Single-row angular contact ball bearing, supporting moderate to heavy one-directional thrust loads, and combined loads where thrust load is predominant.
  • Ball contact angle of 40 degrees relative to the inner and outer raceways increases thrust load capacity.
  • Open configuration for lubrication applied in place.
  • Brass cage evenly spaces balls for reduced friction, vibration, and noise.
  • ABEC 1 tolerance ratings for accuracy and low rotational speeds.
Check Stock

uxcell 3204-2RS Angular Contact Ball Bearing 20x47x20.6mm Sealed Bearings 5204-2RS

  • Low maintenance design for Problem free operation.
  • Angular bearing contact allows for outstanding durability while supporting both Radial and axial loads.
  • Available in wide variety of types, designs, sizes, and materials.
  • Quality you can Count on. SKF has been making ball bearings for over 100 years.
Check Stock

SUNEX 66037 3.5T FLOOR JACK STEEL RAPID RISE

  • Rapid Rise Technology with dual pump pistons raises the saddle to maximum height in only six pump strokes..
  • Overload and bypass safety valves prevent the jack from being used beyond its rated capacity and over extension of the ram..
  • Strong chassis with upper and lower frame flanges to withstand twisting..
  • Wide front wheels and ball bearing mounted rear caster wheels for stability and easy maneuverability..
  • Angular positioned pump pistons provide maximum effective pump stroke when jack is completely under a vehicle..
Check Stock

RBC SAA10AG0 Thin Section Ball Bearing, 440C Stainless Steel, Unsealed, Angular A-Type, 1\ Bore x 1.375\ OD x 0.25\ Width

Check Stock

uxcell PHSB8 Rod End Bearing 1/2-inch Bore Pre-Lubricated Bearing 1/2-20 Female Thread Right Hand

  • Type: 1/2" Hole x 1/2-20 right-hand female thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensure long service life..
  • Capacity: 19KN Static Load Capacity, 15KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

uxcell POSB8 Rod End Bearing 1/2-inch Bore Pre-Lubricated Bearing 1/2-20 Male Thread Right Hand

  • Type: 1/2" Bore x 1/2-20 right-hand male thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 19KN Static Load Capacity, 15KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

uxcell PHSB6 Rod End Bearing 3/8-inch Bore Pre-Lubricated Bearing 3/8-24 Female Thread Right Hand

  • Type: 3/8" Bore x 3/8-24 right-hand female thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

uxcell PHSB6 Rod End Bearings 3/8-inch Bore Pre-Lubricated Bearings 3/8-24 Female Thread Right Hand 2pcs

  • Type: 3/8" Bore x 3/8-24 right-hand female thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

uxcell PHSB6 Rod End Bearings 3/8-inch Bore Pre-Lubricated Bearings 3/8-24 Female Thread Left Hand 2pcs

  • Type: 3/8" Bore x 3/8-24 left-hand female thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

uxcell POSB4 Rod End Bearings 1/4-inch Bore Pre-Lubricated Bearings 1/4-28 Male Thread Right Hand 2pcs

  • Type: 1/4" Bore x 1/4-28 right-hand male thread rod end. Maximum angular misalignment: 13 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 6.6KN Static Load Capacity, 4.5KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

140H Coupling Rubber Assy for Excavator Doosan DH300 CAT E330B Komatsu PC300

  • The shaft couplings are mechanical component that connect the drive shaft and driven shaft of a motor, etc., in order to transmit power..
  • Shaft couplings introduce mechanical flexibility, providing tolerance for shaft misalignment. As a result, this coupling flexibility can reduce uneven wear on the bearing, equipment vibration, and other mechanical troubles due to misalignment..
  • The size is complete and the surface is smooth, convenient for use. The flexible connection design can absorb vibration and compensate for radial, angular and axial misalignment..
  • This shaft coupling features simple structure and compact size, it is convenient for installation..
  • It is commonly used to connect 3D printer, actuating motors, stepping motors, encoders, machine tool, etc..
Check Stock