Best Angular Contact Bearing
MOCHU 725 725C/P5 5x16x5 Angular Contact Ball Bearing, ABEC-5, 15° Contact Angle, Metric, 5mm ID, 16mm OD, 5mm Width, Single Row, Open
- Double-row angular contact ball bearing, supporting moderate combined radial and bidirectional thrust loads.
- Ball contact angle of 20 degrees relative to the inner and outer raceways increases thrust load capacity.
- Rubber seals on both sides of the bearing to keep lubricant in and contaminants out.
- Pressed steel cage evenly spaces balls for reduced friction, vibration, and noise.
- Normal axial internal clearance for applications where thermal expansion is not a factor.
Check StockM30 IPE KV100 Pro V2.0 MAD COMPONENTS Drone brushless Motor for Heavy Multirotor Quadcopter Hexrcopter RC DIY
- More efficient and drawing more power than equivalent motors in the market.
- Precise manufacturing workmanship, perfect winding, absolutely compete with top brands.
- This large drone brushless motor was designed for rigorous conditions and endurance flight, IP44.
- 1 x Double row angular contact ball bearing 1 x Tapered Roller Bearing,Over-sized durable bearings for increased life, durability Support 12-16S.
- Pay attention the extened wire =70mm. high end heavy lift industrial drone use, max thrust 49kg @60V with 40in prop..
Check Stock3001-2RS Bearing Angular Contact Sealed 12x28x12 Ball Bearings VXB Brand
- 003cp003eStatic Load Capacity - 2000 lb.003c/p003e003cp003eDynamic Load Capacity – 3100 lb. 003c/p003e.
Check Stockuxcell 3204-2RS Angular Contact Ball Bearing 20x47x20.6mm Sealed Bearings 5204-2RS
- Low maintenance design for Problem free operation.
- Angular bearing contact allows for outstanding durability while supporting both Radial and axial loads.
- Available in wide variety of types, designs, sizes, and materials.
- Quality you can Count on. SKF has been making ball bearings for over 100 years.
Check StockRBC SAA10AG0 Thin Section Ball Bearing, 440C Stainless Steel, Unsealed, Angular A-Type, 1\ Bore x 1.375\ OD x 0.25\ Width
Check StockLauraland L Shaped Desk 55 Inch L-Shaped Computer Desk Laptop Study Corner Table Gaming Table Workstation for Home Office - Espresso
- [Modern L-Shaped Computer Desk] This desk flaunts a modern design with L-shaped corner,which maximize and create the ideal workspace to serve as a....
- [High-Quality Environmentally Friendly Materials] Made of high quality P2 MDF Board with perfect edge technology plus thicker steel frame, the desk....
- [Durable and Sturdy Structure] Super sturdy, rugged and reliable mechanical design and angular-shaped design ensures the excellent stablility of the....
- [Improve The Use of Space] The size is: 55(L) x 24 (W) x 29 (H), super bearing 300lbs, which offer a large space for multiple monitors or other....
- [Premium After-Sales Service] If there is any question, please feel free to contact us. Our experienced customer service team will response in 24....
Check StockSUNEX 66037 3.5T FLOOR JACK STEEL RAPID RISE
- Rapid Rise Technology with dual pump pistons raises the saddle to maximum height in only six pump strokes..
- Overload and bypass safety valves prevent the jack from being used beyond its rated capacity and over extension of the ram..
- Strong chassis with upper and lower frame flanges to withstand twisting..
- Wide front wheels and ball bearing mounted rear caster wheels for stability and easy maneuverability..
- Angular positioned pump pistons provide maximum effective pump stroke when jack is completely under a vehicle..
Check Stockuxcell PHSB8 Rod End Bearing 1/2-inch Bore Pre-Lubricated Bearing 1/2-20 Female Thread Right Hand
- Type: 1/2" Hole x 1/2-20 right-hand female thread rod end. Maximum angular misalignment: 9 Degree..
- Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensure long service life..
- Capacity: 19KN Static Load Capacity, 15KN Dynamic Load Capacity..
- Features: Large load rating, low noise, anti-corrosion, tough, and durable..
- Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stockuxcell POSB8 Rod End Bearing 1/2-inch Bore Pre-Lubricated Bearing 1/2-20 Male Thread Right Hand
- Type: 1/2" Bore x 1/2-20 right-hand male thread rod end. Maximum angular misalignment: 9 Degree..
- Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
- Capacity: 19KN Static Load Capacity, 15KN Dynamic Load Capacity..
- Features: Large load rating, low noise, anti-corrosion, tough, and durable..
- Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stockuxcell PHSB6 Rod End Bearing 3/8-inch Bore Pre-Lubricated Bearing 3/8-24 Female Thread Right Hand
- Type: 3/8" Bore x 3/8-24 right-hand female thread rod end. Maximum angular misalignment: 9 Degree..
- Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
- Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity..
- Features: Large load rating, low noise, anti-corrosion, tough, and durable..
- Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stockuxcell PHSB6 Rod End Bearings 3/8-inch Bore Pre-Lubricated Bearings 3/8-24 Female Thread Right Hand 2pcs
- Type: 3/8" Bore x 3/8-24 right-hand female thread rod end. Maximum angular misalignment: 9 Degree..
- Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
- Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity..
- Features: Large load rating, low noise, anti-corrosion, tough, and durable..
- Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stockuxcell PHSB6 Rod End Bearings 3/8-inch Bore Pre-Lubricated Bearings 3/8-24 Female Thread Left Hand 2pcs
- Type: 3/8" Bore x 3/8-24 left-hand female thread rod end. Maximum angular misalignment: 9 Degree..
- Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
- Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity..
- Features: Large load rating, low noise, anti-corrosion, tough, and durable..
- Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stockuxcell POSB4 Rod End Bearings 1/4-inch Bore Pre-Lubricated Bearings 1/4-28 Male Thread Right Hand 2pcs
- Type: 1/4" Bore x 1/4-28 right-hand male thread rod end. Maximum angular misalignment: 13 Degree..
- Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
- Capacity: 6.6KN Static Load Capacity, 4.5KN Dynamic Load Capacity..
- Features: Large load rating, low noise, anti-corrosion, tough, and durable..
- Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock