Categories

Best Angular Expansion Joint

Bailey Universal Joint Assemblies (Standard Series) - Universal Joint with Relubricable Bearings - Standard U Joint, 7/8’’ x 7/8’’ ID, 3/16’’ Keyway, 1000 RPM, 5” Overall Length, 2.5 lb, 133015

  • SPECIFICATIONS: This 1 universal joint is a standard rod end ball joint with 7/8’’ x 7/8’’ inner diameter, 3/16’’ keyway, and 1000 RPM. It allows a maximum deflection of 90 degrees and is 5 inches long. Our ball joint weighs 2.5 lb..
  • HIGH SPEED: Our robust Cardan joint can withstand a maximum torque of 800 lb-inches at a consistent speed of 1000 RPM. This universal joint assembly is best suited for high-speed, high torque operations..
  • TOUGH: With simple but precise construction, this U Joint from Bailey is capable of coupling laterally dissonant shafts. It reduces side thrust on bearing bushings, protecting them from damage even when subjected to long-term use..
  • FLEXIBLE: This standard rod ends ball joint allows up to 15% angular displacement at peak velocity. The universal ball rod assembly facilitates easy Up/Down movement of the drive shaft in automobile, industrial, and commercial applications..
  • MADE TO LAST: These universal joints have radical drop-forged slip yokes along with relubricable needle bearings. They are resistant to everyday wear and tear, have exceptional tolerance of high torques, and are built to go the mile..
Check Stock

Hinged Knee Brace, Adjustable Post-Op Knee Support OA Unloading Knee Brace for ACL/Ligament/Sports Injuries, Mild Osteoarthritis & Preventive LProtection Knee Joint Pain/Degeneration - Left Leg

  • Ultra-light weight, single upright with valgus and varus hinge can adjust lateral and medial shift angle to unload shear force of the knee..
  • Ergonomic frame design of the post-op knee brace which transfer the maximum body weight from thigh to calf without exerting pressure on the knee joint..
  • The unloading/offloading low-profile brace with 3 points of leverage for reducing pressure inside the knee joint, angular hinge allow safety control for knee motion. Rom hinges with plug-in flexion/extension stops..
  • Laterally applied frame corrects for either medical or lateral compartment. Suitable for ligament injuries (such as ACL, PCL, MCL), Sport injuries, Arthritis pain, Mild Osteoarthritis (OA) as well as for prevention of the knee joint from degeneration..
  • Universal size(Left/Right): Thigh circum is 29.9” (6”above middle kneecap), calf circum is 20.4” (6” below middle kneecap)..
Check Stock

USA Lab 2L Rotary Evaporator Turnkey Setup Rotovap RE-200A - USAlab

  • CAPACITY - 100ml, 1Pcs, rotary evaporator bump trap.
  • SPECIFICATION - Upper Joint: 24/40, Lower Joint: 14/20, ground glass joints.
  • PREMIUM MATERIAL - Made of borosilicate glass, smooth surface and corrosion resistance, heavy duty design, reusable.
  • HIGH TEMPERATURE RESISTANCE - Annealing temperature 560℃, softening temperature 820℃, expansion coefficient is only one third of ordinary glass.
  • PROMISE - If received damaged, please contact us immediately. ADAMAS-BETA will solve it until satisfied.
Check Stock

uxcell PHSB8 Rod End Bearing 1/2-inch Bore Pre-Lubricated Bearing 1/2-20 Female Thread Right Hand

  • Type: 1/2" Hole x 1/2-20 right-hand female thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensure long service life..
  • Capacity: 19KN Static Load Capacity, 15KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

uxcell POSB8 Rod End Bearing 1/2-inch Bore Pre-Lubricated Bearing 1/2-20 Male Thread Right Hand

  • Type: 1/2" Bore x 1/2-20 right-hand male thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 19KN Static Load Capacity, 15KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

uxcell PHSB6 Rod End Bearing 3/8-inch Bore Pre-Lubricated Bearing 3/8-24 Female Thread Right Hand

  • Type: 3/8" Bore x 3/8-24 right-hand female thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

uxcell PHSB6 Rod End Bearings 3/8-inch Bore Pre-Lubricated Bearings 3/8-24 Female Thread Right Hand 2pcs

  • Type: 3/8" Bore x 3/8-24 right-hand female thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

uxcell PHSB6 Rod End Bearings 3/8-inch Bore Pre-Lubricated Bearings 3/8-24 Female Thread Left Hand 2pcs

  • Type: 3/8" Bore x 3/8-24 left-hand female thread rod end. Maximum angular misalignment: 9 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

uxcell POSB4 Rod End Bearings 1/4-inch Bore Pre-Lubricated Bearings 1/4-28 Male Thread Right Hand 2pcs

  • Type: 1/4" Bore x 1/4-28 right-hand male thread rod end. Maximum angular misalignment: 13 Degree..
  • Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
  • Capacity: 6.6KN Static Load Capacity, 4.5KN Dynamic Load Capacity..
  • Features: Large load rating, low noise, anti-corrosion, tough, and durable..
  • Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..
Check Stock

MOCHU 725 725C/P5 5x16x5 Angular Contact Ball Bearing, ABEC-5, 15° Contact Angle, Metric, 5mm ID, 16mm OD, 5mm Width, Single Row, Open

  • Double-row angular contact ball bearing, supporting moderate combined radial and bidirectional thrust loads.
  • Ball contact angle of 20 degrees relative to the inner and outer raceways increases thrust load capacity.
  • Rubber seals on both sides of the bearing to keep lubricant in and contaminants out.
  • Pressed steel cage evenly spaces balls for reduced friction, vibration, and noise.
  • Normal axial internal clearance for applications where thermal expansion is not a factor.
Check Stock

Low Gloss Patio Paver Sealer, 1 gal - Clear Water-Based Sealant for Natural Stone Surfaces

  • Invisible Waterproofing Protection – Milky white in appearance when first applied, and dries clear.
  • Non-Yellowing, Clear, Water-Based, VOC Compliant Acrylic Sealer – Low Odor and Easy Cleanup with Soap & Water.
  • Helps Prevent Color Loss on Patio Stone Pavers.
  • Ready to Use – No Mixing Required – Easy to Apply with a Pump Up Sprayer.
  • Provides a Low-Gloss Finish to Patio Paver Stones (Does not leave a high gloss finish on your paver stones but rather, a rich angular sheen that protects your pavers from fading and hardens, or “stabilizes” the joint sand. The amount of sheen will vary, based on the porosity of the pavers)..
Check Stock

Low Gloss Patio Paver Sealer, 2.5 gal - Clear Water-Based Sealant for Natural Stone Surfaces

  • Invisible Waterproofing Protection - Milky white in appearance when first applied, and dries clear.
  • Non-Yellowing, Clear, Water-Based, VOC Compliant Acrylic Sealer - Low Odor and Easy Cleanup with Soap & Water.
  • Helps Prevent Color Loss on Patio Stone Pavers.
  • Ready to Use - No Mixing Required - Easy to Apply with a Pump Up Sprayer.
  • Provides a Low-Gloss Finish to Patio Paver Stones (Does not leave a high gloss finish on your paver stones but rather, a rich angular sheen that protects your pavers from fading and hardens, or “stabilizes” the joint sand. The amount of sheen will vary, based on the porosity of the pavers.).
Check Stock

Lovejoy Size NB12B Needle Bearing Universal Joint, 1\ Round Bore and 1\ Round Bore, 1/4\ x 1/8\ Keyways with Setscrew, 2.00\ Outer Diameter, 5.44\ Overall Length

  • Single pin and block universal joint for applications with up to 25 degrees angular misalignment and speeds up to 6,000 RPM.
  • Needle bearing design for applications with continuous high rotational speeds.
  • AISI 1144 carbon steel for strength and durability.
  • Bored hubs fit onto shafts without the need for machining.
  • Operating temperatures range from -30 to 212 degrees F.
Check Stock