Polaris KIT, WHEEL, Qty 1

  • we informing you that as a seller we are no responsible for any kind of fees , duties , charges . wir informieren Sie, dass wir als Verkäufer nicht für irgendwelche Gebühren, Zölle, Abgaben verantwortlich sind..
Check Stock

Juried Engineering Burr Brown OPA134PA OPA134 - Mono HiFi SoundPlus High Performance Audio Operational Amplifiers Op-Amp Breadboard-Friendly Pack of 3

  • Closed ear design / comfortable silicone eartips.
  • Compatible with 2.3 MHz and 2.8 MHz IR transmitters, WIR TX900 and WIR TX925 systems.
Check Stock

Wazakura Annealed Copper Bonsai Training Wire Made in Japan Rust Resistant Outdoor Plant Cable 95.1 ft/29 m roll - 2mm Copper Wire

  • 【Specification】Length: 95.1 feet (29m) | Weight: 10.58 oz (300g) | Gauge: 2.0 mm | Material: Copper (annealed) | Origin: Sanjo city, Niigata prefecture (Japan).
  • 【Made in Japan】Real Japanese bonsai training wire 100% made by artisans and blacksmiths from the city of Sanjo in Niigata prefecture (Japan), area traditionally known for their metalworking skills..
  • 【Bonsai Shaping and Bending Use】The annealed copper bonsai training wire is ideal to use for bending thick branches or shaping the bonsai tree trunk. Copper wire is not as flexible as aluminum wire and can be work hardened quickly. But precisely because of the holding strength, it is great when you try to bend the trunk into new positions, as it will keep shape better..
  • 【Benefits of Annealed Copper】The copper is annealed by heating to a temperature that softens the bonsai wire. This process makes the wire easier to bend and hold branches well without requiring a high gauge, as it would happen if you used aluminum wire.. Annealed copper also tends to fade to a dull brown and match the bonsai trunk, so it's not intrusive and more aesthetically pleasing and the viewer can see more of the tree..
  • 【3 Sizes Available】Depending on your bonsai tree needs and the thickness of the branches an....
Check Stock

HIBUMFX Soft ANNEALED Ground Wire Solid Copper Bond Grounding Conductor 4 AWG 50 FEET Copper Clad Cables Electronic Wire Cable Electrics DIY 4 AWG 50 FEET Copper Bonded

  • Material: Soft ANNEALED copper clad steel grounding conductor ,minimum 10mils copper Per UL-467 grounding & bonding equipment..
  • Size: 4 AWG 50 feet per coil,One additional copper cable extension split bolt connector is included..
  • 4 AWG annealed solid copper ground wire with steel core for greater tensile strength , great grounding conductor for industrial and residential lightning protection and DIY usages..
  • The Soft ANNEALED wire can bear winding,bending and easy to straighten,with great conductivity ,corrosion resistance specially designed for grounding conductor and DIY usages..
Check Stock

Yamaha YBS-62 Professional Baritone Saxophone

  • The YBS62 continues to receive rave reviews as one of the best baritone saxophones available.
  • The annealed bell gives this baritone sax the highest quality sound.
  • Low A, rocker-style low Bb mechanism, high F# key, front F key, one-piece annealed and engraved bell, mother-of-pearl key pearls, adjustable thumb....
  • All Yamaha wind instruments come with a limited 5-year warranty.
Check Stock

Bullseye Metals 1/4 .250 Steel Plate 6\ x 12\ Flat Bar Mild Steel!

  • Knife Blade Steel Annealed and Ready for Stock Removal / Forging / Grinding / Sanding READY! 3-Pack.
  • 1095 is the Highest of the Carbon Grades Delivers Excellent Heat Treat Results! Perfect for Blades, Knives, Hand Tools, Shims, Etc...
  • Material Is Low Phosphorus, Low Sulfer, Calcium Treated To Enhance Internal Cleanliness In The As Rolled Condition..
  • (Hardness As Rolled: Rockwell C 15-45 Hardness) (Hardness Annealed: Rockwell B 95 Max).
Check Stock

DOZYANT 12 Feet Universal QCC1 Low Pressure Propane Regulator Grill Replacement with 12 FT Hose for Most LP Gas Grill, Heater and Fire Pit Table, 3/8" Female Flare Nut

  • Type-1 (QCC-1) tank connect – fits all appliances with a Type 1 connection . 3/8″ female flare swivel nut which has an outside diameter of 5/8″ in order to accommodate for the flare seat.
  • Replacement for Weber Genesis 300-series gas grills, Genesis Silver C, Genesis Gold ,Genesis Platinum , Spirit E-210/E-310 etc. and most of Char-broil gas grill with side burner,Dyna-Glo dgp350snp-d,mfa350bnp/mfa350cnp ge530bsp-d, dge486ssp-d, dge486gsp-d etc.,Uniflame GBC873W-C, GBC873W, GBC940WIR, GBC940WIR-C, GBC976W, GBC956W1-C, GBC1076WE-C, BH12-101-001-02 etc., most of Kenmore gas grill and most of Brinkmann gas grill..
  • Easy installation – No tools required, tool-less attachment to tank.
  • Safety & corrosion resistant – CSA certificated – Pass CSA certificate for your safety. Provides secure, air-tight connection between grill or fire pit and tank, no gas leaks, ensures safety while using grill, no issues with regulator or gas, air flow is kept stable and at appropriate levels.
  • Fits most gas grill, heater, fire pit, lp generator, lantern, two burner camping stove, side burner, and used for most low pressure gas propane application.
Check Stock

Cast Master 1095 Steel Flat Stock for Knife Blades - Bar Stock High Carbon Steel Knife Making Supplies - Great Blacksmithing Blade Blank - Three Billet Set Elite

  • 1095 high carbon steel – With the recent popularity of DIY blade-making has come a huge variety of blade making steel. Our Cast Master Elite 3-pack features versatile annealed billets ready for your creativity. Each piece is 3/16ths of an inch thick..
  • Annealed & ready to work – Pure 1095 steel alloy bar stock comes annealed and ready for your knife & toolmaking experience. We recommend 1095 to our customers with a few tools or blades ‘under their belt’ as some beginners can get frustrated with it..
  • Pairs perfectly with our Cast Master Elite Forges – For amazing consistency & ease-of-use, our forges can’t be beat. Achieve temperatures quickly, and maintain without annoying fluctuations. Our CMF-1000, 2000, & 3000 model forges are excellent for all levels of experience..
  • High quality manufacturing – We insist on consistent tolerances both on the ingredient contents (carbon, chromium, manganese, etc.) as well as the forming of the bars themselves. You’ll be pleased to find virtually no warpage or variances in our 1095 steel bars..
  • Cast Master Elite USA – We’re a United States based business that designs products for the enthusiastic DIY crowd. We offer high quality blacksmith forges and furnaces, industrial tools, knife making supplies, ....
Check Stock

Heavy Duty Double Welding Cable Lead Reel USA Made 10\ #1 selling lead reel

  • 2 AWG cable. Please refer to the photo gallery for a technical specification chart (amperage, voltage, stranding, insulation and copper thickness, etc.).
  • High grade EPDM insulation jacket: Resistant to tears, cuts, abrasion, water moisture, and oil based solvents.
  • High stranding cable count combined with EPDM insulation results in a very flexible cable.
  • Rated up to 600 volts, -50°C to +105°C (-58°F to +221°F). Pure copper cable. Copper cable is fully annealed per ASTM standards.
  • Made in the USA. Copper cable is fully annealed per ASTM standards. Complies with SAE J1127. IEC and RoHS compliant.
Check Stock

JEASOM 6 FT Propane Hose Regulator with Gauge, Stainless Braided Hose QCC1 Connection for Most LP Gas Grill, Heater and Fire Pit Table, Stainless Braided Hose 3/8' Female Flare Nut

  • Stainless braided hose prevents whatever animals from chewing through it . The attached propane gauge can detect dangerous leaks and read fuel level at glance.
  • Replacement for Weber Genesis 300-series gas grills, Genesis Silver C, Genesis Gold ,Genesis Platinum , Spirit E-210/E-310 etc. and most of Char-broil gas grill with side burner,Dyna-Glo dgp350snp-d,mfa350bnp/mfa350cnp ge530bsp-d, dge486ssp-d, dge486gsp-d etc.,Uniflame GBC873W-C, GBC873W, GBC940WIR, GBC940WIR-C, GBC976W, GBC956W1-C, GBC1076WE-C, BH12-101-001-02 etc., most of Kenmore gas grill and most of.
  • Easy installation - No tools required, tool-less attachment to tank. It is normal if you hear noise in the regulator, it is the resonance of the gas in the regulator..
  • Connects to QCC1/Type1 LP tanks and cylinders,fits to gas grills, heaters ,fire pit table and most QCC1/Type 1 low pressure gas application.Great for BBQ, camping, tailgating, heating needs or having an outdoor cookout..
  • Provides secure, air-tight connection between grill or fire pit and tank, no gas leaks, ensures safety while using grill, no issues with regulator or gas, air flow is kept stable and at appropriate levels.
Check Stock

GasSaf 6 Feet Propane Regulator and Hose Universal Grill Regulator Replacement with Stainless Steel Braided Hose for QCC1 Low Pressur LP Gas Grill, Heater and Fire Pit Table,3/8' Female Flare Nut

  • 3/8-inches flare fitting has an outside diameter of 5/8-inches in order to accommodate the flare seat,The Maximum 95, 000BTU per hour, low pressure propane regulator with 2feet/24inch Low Pressure LPG hose for propane gill and fire pit table, strong hose will last for a long time.
  • Replacement for Weber Genesis 300-series gas grills, Genesis Silver C, Genesis Gold , Genesis Platinum , Spirit E-210/E-310 etc. and most of Char-broil gas grill with side burner, Uniflame GBC873W-C, GBC873W, GBC940WIR, GBC940WIR-C , most of Kenmore gas grill and most of Brinkmann gas grill..
  • Easy installation - No tools required, tool-less attachment to tank. It is normal if you hear noise in the regulator, it is the resonance of the gas in the regulator..
  • Connects to QCC1/Type1 LP tanks and cylinders,fits to gas grills, heaters ,fire pit table and most QCC1/Type 1 low pressure gas application.Great for BBQ, camping, tailgating, heating needs or having an outdoor cookout..
  • Provides secure, air-tight connection between grill or fire pit and tank, no gas leaks, ensures safety while using grill, no issues with regulator or gas, air flow is kept stable and at appropriate levels.
Check Stock

DOZYANT Vertical 2 Feet Propane Regulator and Hose Universal Grill Regulator Replacement Parts, QCC1 Hose and Regulator for Most LP Gas Grill, Heater and Fire Pit Table,3/8' Female Flare Nut

  • Type-1 (QCC-1) tank connect - fits all appliances with a Type 1 connection . 3/8" female flare swivel nut which has an outside diameter of 5/8" in order to accommodate for the flare seat.
  • Replacement for Weber Genesis 300-series gas grills, Genesis Silver C, Genesis Gold ,Genesis Platinum , Spirit E-210/E-310 etc. and most of Char-broil gas grill with side burner,Dyna-Glo dgp350snp-d,mfa350bnp/mfa350cnp ge530bsp-d, dge486ssp-d, dge486gsp-d etc.,Uniflame GBC873W-C, GBC873W, GBC940WIR, GBC940WIR-C, GBC976W, GBC956W1-C, GBC1076WE-C, BH12-101-001-02 etc., most of Kenmore gas grill and most of Brinkmann gas grill..
  • Easy installation - No tools required, tool-less attachment to tank. It is normal if you hear noise in the regulator, it is the resonance of the gas in the regulator..
  • Safety & corrosion resistant - CSA certificated - Pass CSA certificate for your safety. Provides secure, air-tight connection between grill or fire pit and tank, no gas leaks, ensures safety while using grill, no issues with regulator or gas, air flow is kept stable and at appropriate levels.
  • Fits most gas grill, heater, fire pit, lp generator, lantern, two burner camping stove, side burner, and used for most low pressure gas propane application.
Check Stock

3 Feet Propane Regulator Hose with Propane Tank Gauge Universal Grill Regulator Replacement Parts, QCC1 Hose and Regulator for Most LP Gas Grill, Heater and Fire Pit Table, 3/8" Female Flare Nut

  • Equipped with propane tank gauge. Type-1 (QCC-1) tank connect - fits all appliances with a Type 1 connection . 3/8" female flare swivel nut which has an outside diameter of 5/8" in order to accommodate for the flare seat.
  • Replacement for Weber Genesis 300-series gas grills, Genesis Silver C, Genesis Gold ,Genesis Platinum , Spirit E-210/E-310 etc. and most of Char-broil gas grill with side burner,Dyna-Glo dgp350snp-d,mfa350bnp/mfa350cnp ge530bsp-d, dge486ssp-d, dge486gsp-d etc.,Uniflame GBC873W-C, GBC873W, GBC940WIR, GBC940WIR-C, GBC976W, GBC956W1-C, GBC1076WE-C, BH12-101-001-02 etc., and most of Brinkmann gas grill..
  • Easy installation - No tools required, tool-less attachment to tank. It is normal if you hear noise in the regulator, it is the resonance of the gas in the regulator..
  • Safety & corrosion resistant - CSA certificated - Pass CSA certificate for your safety. Provides secure, air-tight connection between grill or fire pit and tank, no gas leaks, ensures safety while using grill, no issues with regulator or gas, air flow is kept stable and at appropriate levels.
  • Fits most gas grill, heater, fire pit, lp generator, lantern, two burner camping stove, side burner, and used for most low pressure gas propane application.
Check Stock