Best Anodized Pulley - TopShopReview.com

NewDoar 30KN CE Certified Large Rescue Pulley Single Sheave with Swing Plate for Outdoor Mountaineering Rock Climbing Rescue(Blue 1pcs)

[Material] Anodized light alloy Swing side plates and pulleys for easy and rapid rope installation and removal! Net Weight:0.6 Ib(270g).
Dimensions:3.23"W(8.1 cm) * 4.8"L(12.2 cm)..
[Single Pulley] Breaking Strength:30kN / 6746 lb for high durability to satisfied your requirements..
[Applicable Rope] Compatible with wide range of ropes up to 16mm /0.6 inch. for complex rescue / hauling system setup..
[Hanging Design] The hanging point is an elliptical design, so that the force is even when hanging, and the rolling tension is 15KN. great for a variety of industrial and sports applications..
[Widely Use] Rock climbing pulley for mountain rescue, tower work, ski patrol or whatever requires block and tackle system.For hauling big load, large pulley is much more better and easier..

Check Stock

EKEV Flagpole Truck Pulley and Gold Anodized Top Ball Ornament Topper Set - Fit for Most Standard US Flag Poles (2

...side is 2"), Threaded hole in top of truck accepts ornaments with a spindle threading of 1/2"-13NC, Accepts a maximum halyard diameter of 5/16", Suitable for most standard US flagpole and top ornament.
PREMIUM MATERIAL: Flagpole trucks have sturdy cast aluminum with nylon pulley, Durable and anti-ruse.
Gold top ball anodized aluminum finish and corrosion resistant, Durable and weatherproof, Long lasting for work.
GOOD LOOK: Nice accessories on your flagpole top, make your USA flag pole looks more exquisite.
Replace your rusted and old flagpole top ornament and pulley truck, Your flag pole top decoration will look new again!.
EASY TO USE: Simply install the top ornament (gold ball) into the truck, and adjust the truck position on the top of the flag pole and secure the screw, Also, it is easily to pass the halyard rope through the pulley.
If you also want to install top gold ball or perfect flagpole repair kit (includes flagpole halyard rope, cleat hook, swivel snap hook), Do search & at amazon.

Check Stock

Evergreen Flag Two-Position Cast Iron Bronze Flag Pole Bracket

..." maximum Outside Diameter flagpole tube (Truck inside is 2"). Flag pole pulley accepts a maximum halyard diameter of 5/16"..
Flag Pole Ball - 3 inch ball diameter, 1/2" thread rod suitable for most standard USA flagpole, as well as the mounted light or pulley truck on top of flagpole! Unique aluminum alloy and gold anodized finish decor, which make your US flag pole more particular and exquisite..
Flag Pole Rope & Clips - 50 feet long and 0.25 inch in diameter, suitable for flagpoles up to 25 Ft. Flag halyard made of tightly braided polyester flagpole rope, resistant to UV, abrasion and stretch.
Can be used in any weather. With 4 pcs 1.85 Inch nickel plated flagpole swivel snap hooks which fasten the flag on the flagpole, prevent the flag from tangling..
Flag Pole Cleat Hook - Flagpole cleat hook have 4.23“ length and hardware distance between bolt center is 0.8”. Light duty zinc cast cleat, Durable and great use for fastening rope to flagpole..
Purchase Guaranteed - We are so confident with our products that we can offer a 100% money-back guarantee if you are not 100% satisfied with your purchase within 30-day period..

Check Stock

VMS Racing 90-01 VMS Racing Light Weight Billet Aluminum Crankshaft CRANK PULLEY Compatible with Honda Acura Integra including GSR and Type-R 1990-2001

[ IMPORTANT ] VMS RACING BRAND (NOT generic). Comes in VMS Racing Branded BOX. Brand New in Box / Never Used / Never Installed..
Weight = 9.8 OUNCES!!! Lightweight 6061 T-6 billet aluminum. VMS Racing Lightweight Pulley increases HORSEPOWER, TORQUE and FUEL ECONOMY..
CNC Machined to .001 Tolerances (such tolerances usually reserved for the aviation industry). Better than OEM FITMENT & ALIGNMENT. Hard anodized in matte finish Gun Metal, for a long lasting and beautiful finish..
Only OEM size Light Weight Racing pulley on the market! Uses factory sized belts (no need to change the OEM sized belts. OEM size means NO charging or overheating problems. Same Stock SIZE - SAME Stock CONFIGURATION - NO NEED to use different belts!.
Compatible with Fitment on Honda B16 B18 B20 (DOHC Engines) 90 91 92 93 94 95 96 97 98 99 00 01 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 (IMPORTANT - will NOT fit B20A engines). Please note. This pulley WILL disable your A/C and may require a shorter belt depending on your application..

Check Stock

Sunhokey 5M GT2 Timing Belt 6mm Width+6pcs 20 Teeth 5mm Bore Timing Pulley Wheel+ 4pcs Idler+ 4pcs Tensioner Spring Torsion + 2pcs Gear Clamp Mount Block with Allen Wrench for 3D Printer CNC

????【5M Timing Belt】The timing belt is made of premium rubber, durable and flexible. It’s designed specifically for linear motion, high positioning accuracy. It is popular for most 3D printers, Reprap, Prusa, MendelMax, etc..
????【Timing Pulley Wheel】Adopt high-quality aluminum, excellently machined, finished smoothly. The timing pulley with 20 teeth contact with the belt which minimizes the risk of the belt slipping..
????【Timing Belt Idler Pulley】Made from high-quality aluminum alloy, high hardness, anodized surface treatment, effective waterproof and rustproof, corrosion-resistant, more beautiful and durable..
????【Locking Spring】With the springs, you can add the right tension you need and make your prints much more precise..
????【Mounting Block】The mounting block is used in open belt buckles for a 2GT belt (and some other models). Make sure that the gearbox is firm and free from loosening..

Check Stock

ACDelco GM Original Equipment 10085754 Crankshaft Pulley , Black

Compatible/Replacement For: Acura / Honda K20 / K24 Engines Only.
[ Attention: Some Listed Models Will Require Engine Swap Of A K-Series Engine ].
Please Check Your Engine Before your purchase.
Lightweight aluminum pulley made from T6061 aluminum and anodized for durability.
No Installation Guides Are Included, We Highly Recommend To Seek Professional Installation.

Check Stock

Harmonic Balancer Engine Crankshaft Pulley Ka24E Febest NDS-KA24E Oem 12303-86G0A

[ IMPORTANT ] VMS RACING BRAND (NOT generic). Comes in VMS Racing Branded BOX. Brand New in Box / Never Used / Never Installed..
Weight = 15 ounces. Lightweight 6061 T-6 billet aluminum. VMS Racing Lightweight Pulley increases HORSEPOWER, TORQUE and FUEL ECONOMY..
CNC Machined to .001 Tolerances (such tolerances usually reserved for the aviation industry). Better than OEM FITMENT & ALIGNMENT. Hard anodized in matte finish Gun Metal, for a long lasting and beautiful finish..
Only OEM size Light Weight Racing pulley on the market! Uses factory sized belts (no need to change the OEM sized belts. OEM size means NO charging or overheating problems. Same Stock SIZE - SAME Stock CONFIGURATION - NO NEED to use different belts!.
Compatible with Mazda Miata 1.8 L .8L Liter Litre BP-4W BP4W Mazdaspeed MX5 MX-5 Turbo Turbocharged Roadster 99 00 01 02 03 04 05 1999 2000 2001 2002 2003 2004 2005 CP549 performance engine swap.

Check Stock

HJ Garden 2pcs 16 Teeth 3mm Bore Idler Timing Pulley with Bearing 2GT Aluminium Alloy H Type GT2 Synchronous Wheel Without Teeth for 6mm Width Belt 3D Printer CNC Mechanical Drive Black

2pcs Black GT2 16 Teeth H Type Idler Timing Pulley, Fit for 6mm Width Timing Belt.
Inner Bore: 3mm, Teeth Width: 6.5mm, Overall Height: 8.5mm, Outer Diameter 13mm, Type: Smooth without teeth.
Made from high quality aluminum alloy, high hardness, anodized surface treatment, effective waterproof and rustproof, corrosion resistant, more beautiful and durable..
Each idler timing pulley has double bearings, to ensure the machine runs well..
Widely used in milling machine, gear forming machine, drilling machine, CNC lathe, hobbing machine or other mechanical transmission occasions..

Check Stock

3/4\ Parallel Crankshaft Crank Fits Honda GX160 5.5HP QX QH Engine 196cc 212cc Go Kart

[ IMPORTANT ] VMS RACING BRAND (NOT generic). Comes in VMS Racing Branded BOX. Brand New in Box / Never Used / Never Installed..
Weight = 1 pound 15 ounces. Lightweight 6061 T-6 billet aluminum. VMS Racing Lightweight Pulley increases HORSEPOWER, TORQUE and FUEL ECONOMY..
CNC Machined to .001 Tolerances (such tolerances usually reserved for the aviation industry). Better than OEM FITMENT & ALIGNMENT. Hard anodized in matte finish Gun Metal, for a long lasting and beautiful finish..
Only OEM size Light Weight Racing pulley on the market! Uses factory sized belts (no need to change the OEM sized belts. OEM size means NO charging or overheating problems. Same Stock SIZE - SAME Stock CONFIGURATION - NO NEED to use different belts!.
Compatible with 99-00 Honda Civic Si w/ DOHC (B16A2) 96-97 Honda Civic Del Sol w/ DOHC (B16A3) 94 95 96 97 98 99 00 01 Integra including GSR & Type-R (B18B1 B18C1 B18C3 B18C5) and 1997 1998 1999 2000 2001 Honda CRV (B20Z & B20B require different sized belts)..

Check Stock

NQ Flagpole Top Replacement Kits - Silver Aluminum Flagpole Ball Topper Ornament and Flagpole Truck with Nylon Pulley Fit 1.6 to 2 Diameter US Flag Poles 2 Truck & 3 Silver Ball

What You Will Get ▶ Set contain:1pc Silver Aluminum Alloy Flagpole Ball Topper with unique bright silver anodized finish decor,1pc Silver Flagpole....
Rust Free & Study ▶ Is harsh weather a problem? Don’t worry,our Flag Pole Ball Topper & Flagpole Truck with Nylon Pulley has a weather-friendly....
Give your flagpole a fresh, new look ▶ Want every passer-by to see your flag? after all, it's a wonderful view. Update your rusted,old flag pole....
Perfect Partner ▶ Do you spend time in finding out how to decorate your outdoor flagpole? Our Flagpole Ball Topper and Flagpole Truck is a good....
Easy Installation ▶ Are you intimidated by complex tools? That's not here. Simply pass the halyard rope through the pulley, screw in the ball to the....

Check Stock

NQ Flagpole Hardware Repair Parts Kit-50 Feet Halyard Rope+3\ Gold Ball + 6\ Zinc Alloy Cleat+4 PCS Metal Swivel Snap Clips+Aluminum Alloy Flagpole Truck with Nylon Pulley for 1.6\-2\ Flag Poles Top

3’’ Flagpole Ball Topper ▶ Made of Aluminum Alloy with unique bright gold anodized finish decor,comes as a whole part with a diameter of 3’’.Long spindle shaft is perfectly fit through a solar flag light,jam nut can firmly locked the solar flag light..
2’’ Flagpole Truck with Nylon Pulley ▶ Made of Aluminum Alloy,fits flagpole with outside diameter from 1.6’’ to 2" .The nylon pulley will keep the flag rope for pole sliding smoothly through, perfect fit NQ flagpole halyard rope, you can easily raise and lower the flag.3pcs inset screws will make the truck on flagpole top more stable..
50FT-1/4’’ Flagpole Halyard Rope ▶ Made of 12 strands of 100% Nylon,designed for all-weather use.1/4 inch diameter can easily pass through the pulley,50FT long compatible with flagpoles up to 25FT..
6’’ Flag Pole Cleat with Mounting Screws ▶ Made of Zinc Alloy with unique bright silver finish decor,durable and long lasting use for fastening rope to flagpole.2pcs stainless steel mounting screws can fix the cheat on flagpole more easy.6“ length and distance between side is 0.7”..
2.5’’ Flag Swivel Hooks ▶ Made of Zinc Alloy with unique bright gold finish decor,.0.4’’ opening size is suitable for most standard grommet flags,0.5’....

Check Stock

BlackPath - Fits 1990-2001 Integra Lightweight Racing Crankshaft Pulley For Acura B18B1 + B18C1 + B18C3 + B18C5 Engines (Black) T6 Billet

[ IMPORTANT ] VMS RACING BRAND (NOT generic). Comes in VMS Racing Branded BOX. Brand New in Box / Never Used / Never Installed..
Weight = 1 pound 6.5 ounces. Lightweight 6061 T-6 billet aluminum. VMS Racing Lightweight Pulley increases HORSEPOWER, TORQUE and FUEL ECONOMY..
CNC Machined to .001 Tolerances (such tolerances usually reserved for the aviation industry). Better than OEM FITMENT & ALIGNMENT. Hard anodized in matte finish Gun Metal, for a long lasting and beautiful finish..
Only OEM size Light Weight Racing pulley on the market! Uses factory sized belts (no need to change the OEM sized belts. OEM size means NO charging or overheating problems. Same Stock SIZE - SAME Stock CONFIGURATION - NO NEED to use different belts!.
Compatible with Mazda Miata 1.8 L .8L Liter Litre BP-ZE BPZE MX5 MX-5 Roadster Eunos 94 95 96 97 1994 1995 1996 1997 CP548 performance engine swap.

Check Stock

VMS Racing 93-01 Light Weight Billet Aluminum Crankshaft CRANK PULLEY Compatible with Honda Prelude with the 2.2L DOHC VTEC H22 H22A1 H22A4 engines 1993-2001

[ IMPORTANT ] VMS RACING BRAND (NOT generic). Comes in VMS Racing Branded BOX. Brand New in Box / Never Used / Never Installed..
Weight = 2 pound 3 ounces. Lightweight 6061 T-6 billet aluminum. VMS Racing Lightweight Pulley increases HORSEPOWER, TORQUE and FUEL ECONOMY..
CNC Machined to .001 Tolerances (such tolerances usually reserved for the aviation industry). Better than OEM FITMENT & ALIGNMENT. Hard anodized in matte finish Gun Metal, for a long lasting and beautiful finish..
Only OEM size Light Weight Racing pulley on the market! Uses factory sized belts (no need to change the OEM sized belts. OEM size means NO charging or overheating problems. Same Stock SIZE - SAME Stock CONFIGURATION - NO NEED to use different belts!.
Compatible with 93 94 95 96 97 98 99 00 01 1993 1994 1995 1996 1997 1998 1999 2000 2001 Honda Prelude with the 2.2L DOHC VTEC H22A1 and H22A4 engines.

Check Stock