John Guest Acetal Copolymer Barbed Tube Fitting, Stem, 3/8\ Stem OD x 3/8\ Hose ID (Pack of 10)
- Stem fitting for connecting pipes or tubes in a straight line.
- Stem fitting inserts into tubing to connect pipes or tubes with different ends.
- Made of acetal copolymer plastic for low moisture absorption and high tensile and flexural strength.
- Meets NSF/ANSI standards 14, 51, and 61 for quality assurance.
Check StockJohn Guest Acetal Copolymer Barbed Tube Fitting Stem 1/2 Stem OD x 1/2 Hose ID Pack of 10
- Stem fitting for connecting pipes or tubes in a straight line.
- Stem fitting inserts into tubing to connect pipes or tubes with different ends.
- Made of acetal copolymer plastic for low moisture absorption and high tensile and flexural strength.
- Meets NSF/ANSI standards 14, 51, and 61 for quality assurance.
Check StockUvex S3603 Genesis Safety Eyewear, Mercury Red Frame, Gold Mirror Ultra-Dura Hardcoat Lens
- Three position rachet lens inclination adjusts to complete the fitting system and provides unsurpassed extended wear comfort.
- A unique ventilation channel between the frame and lens vents the eye socket area to deliver an outstanding level of moisture and fog control.
- Soft flexible fingers on the nose piece adjust and conform to almost any nasal profile to reduce slippage.
- Economical and easy lens replacement system allows for multiple lens tints and extends the life of the eyewear.
- Meets ANSI Z87+ and CSA Z94.3 standards and military Vo ballistic impact test (7 times higher than ANSI requirements).
Check StockHexArmor SharpsMaster HV 7082 Nitrile Coated Safety Work Gloves with Needle Resistance Medium
- HIGHEST CUT PROTECTION AVAILABLE: Interior glove layer features SuperFabric, one of the toughest, most durable fabrics in the world, giving you....
- PROTECTS FROM NEEDLESTICKS: Interior glove layer features SuperFabric, one of the toughest, most durable fabrics in the world, giving you ANSI/ISEA....
- TESTED USING ACTUAL 25-GAUGE NEEDLES: Our needle-resistant glove has been tested in the field in real world environments and according to the ANSI....
- FORM-FITTING, KNIT MATERIALS WITH FLAT NITRILE PALM COATING: Single-glove needle solution with incredible dexterity and comfort matched with a flat....
- WASHABLE: Longevity is increased when our seamless nitrile coating gloves are properly machine washed or hand washed. Tumble dry low or hang indoors..
Check StockClass A Customs | RV Fresh and Gray Water Tank | Combo Pack (20 Gallon & 25 Gallon) | RV Water Holding Tanks
- NSF Certified MATERIALS used for manufacturing process — ALL PARTS of tank made with NSF International NSF/ANSI Std 61 approved Medium Density Polyethylene (MDPE) Resin with UV-8 stabilization — The tank and fittings are both made out of this material..
- These 20 and 25 gallon tanks each have two 1/2″ female NPT fittings (fitting will be closed, to use remove inner membrane with razor knife) and two 1 1/2″ female NPT fittings (fitting is not closed, this fitting is completely open).
- 20 Gallon Tank measurements – 32 1/2″ x 11 3/4″ x 11 3/4″ (+/-.25″).
- 25 Gallon Tank measurements – 33 1/2″ x 17″ x 10″ (+/- .25″).
- Combo Pack of RV Fresh & Gray Water Tanks, 20 Gallon & 25 Gallon.
Check StockUvex S3761 Genesis Reading Magnifiers Safety Eyewear +1-1/2, Black Frame, Clear Ultra-Dura Hardcoat Lens
- Three position rachet lens inclination adjusts to complete the fitting system and provides unsurpassed extended wear comfort.
- A unique ventilation channel between the frame and lens vents the eye socket area to deliver an outstanding level of moisture and fog control.
- Soft flexible fingers on the nose piece adjust and conform to almost any nasal profile to reduce slippage.
- Economical and easy lens replacement system allows for multiple lens tints and extends the life of the eyewear.
- Meets ANSI Z87+ and CSA Z94.3 standards and military Vo ballistic impact test (7 times higher than ANSI requirements).
Check StockWeld-On 10211 P-68 PVC/CPVC Non-Bodied Primer - Fast Acting and Low-VOC, Clear, 1 Pint (16 fl oz)
- Rapidly softens and dissolves the joining surfaces of PVC and CPVC pipe and fittings - an essential first step before application of solvent cement.
- Promotes maximum fusion between pipe and fitting during welding.
- Clear color helps prevent staining while priming.
- Compatible with all classes and schedules of PVC and CPVC.
- Meets SCAQMD Rule 1168/316A, ASTM F 656, NSF/ANSI 14, and NSF/ANSI 61 performance specifications.
- contributes toward satisfying Indoor Environmental Quality credits for LEED v4.
Check StockClass A Customs | RV Fresh and Gray Water Tank | Combo Pack (40 Gallon & 55 Gallon) | RV Water Holding Tanks
- Combo Pack of RV Fresh & Gray Water Tanks, 40 Gallon & 55 Gallon.
- NSF Certified MATERIALS used for manufacturing process -- ALL PARTS of tank made with NSF International NSF/ANSI Std 61 approved Medium Density Polyethylene (MDPE) Resin with UV-8 stabilization -- The tank and fittings are both made out of this material..
- These 40 gallon and 55 gallon tanks each have two 1 1/2" female NPT fittings (fitting will be closed, to use remove inner membrane with razor knife) and two 1/2" female NPT fittings (fitting is not closed, this fitting is completely open).
- 40 Gallon Tank Measurements - 39 1/2" x 18" x 13" (+/- .25").
- 55 Gallon Tank Measurements - 37 1/2" x 19 1/2" x 17 1/2" (+/- .25").
Check StockBrass Pipe Fitting Coupling-1/2 x 1/2 NPT Female Chrome Plated Finish Brass Pipe Fitting Coupler with 1 Roll Copper Joint Thread Sealing Tape for Home Plumbing Pipes 1pcs-Chrome Plated
- 【MATERIAL】Our brass pipe fitting coupling is made of premium solid brass with chrome plated finish.chrome plated brass for corrosion resistance,....
- 【APPLICATION】Our brass pipe fitting coupling can apply to water, oil and fuel, LP and natural gas, and be used to connect various pipes as well as....
- 【STANDARD】Our brass pipe fitting coupling meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance..
- 【FUNCTION】1/2" female x 1/2" female NPT threads equal diameter hex nipple for connecting two female threaded pipes with same diameters. Or....
- 【SERVICE】Our QC department do 100% quality inspection on the brass pipe fitting coupling before delivery. We will do 100% refund if brass pipe....
Check StockHexArmor Rig Lizard Oasis 2023 Breathable Summer Impact Work Gloves, Medium, 1 Pair
- Breathable For Working In Heat: Advanced HexVent technology provides a breathable heat-release system making the 2023 a great summer work glove.
- Protects From Impacts: Proprietary flexible Exoskeleton with IR-X work glove impact protection system keeps the entire top of the hand safe from smash and impact hazards.
- Flexible, Reliable Wet/Dry Grip With Abrasion Resistance: Proprietary durable TP-X palm with reinforced stitching provides ultimate durability and a flexible firm grip in wet and dry applications.
- Protects From Cuts And Punctures: ANSI/ISEA level A3 cut resistance (on an A1- A9 scale) and ANSI/ISEA level 4 puncture resistance (on an A1-A5 scale).
- Form-Fitting, Durable Materials With High Dexterity: Quality hi-vis materials with reinforced seams, index finger and thumb crotch for increased longevity, and a SlipFit cuff provide a comfortable, dexterous, and precise fit.
Check StockWELD-ON 10225 P-70 Industrial Grade PVC/CPVC Non-Bodied Primer - Fast Acting and Low-VOC, Purple, 1 Pint (16 fl oz)
- Rapidly softens and dissolves the joining surfaces of PVC and CPVC pipe and fittings - an essential first step before application of solvent cement.
- Promotes maximum fusion between pipe and fitting during welding.
- Strong, aggressive priming action ideal for use in cold weather.
- Compatible with all classes and schedules of PVC and CPVC and especially recommended for use on Schedule 80 and large-size pipe.
- Meets SCAQMD Rule 1168/316A, ASTM F656, NSF/ANSI 14, and NSF/ANSI 61 performance specifications.
- contributes toward satisfying Indoor Environmental Quality credits for LEED v4.
Check Stock(Pack of 10) EFIELD Pex A Full Flow Expansion Brass Fitting 3/4'x 3/4' Elbow ONLY For Pex-A Tubing Connection, ASTM F1960, Lead Free
- This Efield Product is Compatible with all Types of Brands of Pex A Pipe/Tubing, Uponor(Wirsbo), Sious Chief, Etc..
- Certified to ANSI/NSF-61 and ASSE 1061 Product Standard.
- This Efield Product is Compatible with Expanding Fitting System, NOT Compatible with Stainless Steel Clamp & Copper Crimp Ring Systems.
- Only for Pex A Pipe/Tubing Fitting Connection.
Check StockMoldex M6845 Pura-Fit Earplugs, Long Length (500 per Dispenser)
- Highest independently tested to ANSI S319-1974 with a NRR 34.
- Longer length for easy fitting and removal.
Check Stock