Categories

Best Ansi Metal Casting Part

Mold Star 15 SLOW - 1A:1B Mix By Volume Platinum Silicone Rubber - Pint Unit

  • Tear Resistant - Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage *Packaging may vary*.
  • Heat Resistant - Cured Mold Star rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys.
  • Curing - Allow Mold Star 15 SLOW silicone rubber to cure for 4 hours at room temperature (73°F/23°C) before demolding..
  • Vacuum Degassing - Although not necessary, vacuum degassing helps eliminate any entrapped air in pourable silicone rubber.
  • Mold Performance - The physical life of the mold depends on how you use it (materials cast, frequency, etc.). Casting abrasive materials such as concrete can quickly erode mold detail, while casting non-abrasive materials (wax) will not affect mold detail. Before storing, the mold should be cleaned with a soap solution and wiped fully dry. Two part (or more) molds should be assembled. Molds should be stored on a level surface in a cool, dry environment.
Check Stock

Proline Frost Proof Sillcock 1/2 " Copper,12 " L,3/4 " Mht Chrome Plated

  • Prevents outside faucet freezing. Chrome-plated brass body and tube. Lead-free silver solder construction. Built-in lock-shield. 3/4" hose thread outlet..
  • The sillcock drains automatically upon water shut off, if the hose is removed or open. 1/2" nominal copper sweat or 1/2" M.I.P. Import. The sillcock drains automatically upon water shut off, if the hose is removed or open..
  • 1/2 in MIP x 1/2 in Sweat. Heavy chrome plated brass, silver soldered construction. Notched flange for stable installation. Chrome plated casting and tube, lock shield, 3/4 in hose thread outlet, heavy cast iron handle..
  • Pipe threads comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7, solder connections comply with ANSI B16.18. CSA certified ANSI/NSF 61-9. UPC coded. Bulk handy carton..
  • Prevents outside faucet freezing. Chrome-plated brass body and tube. Built-in lock-shield. 3/4in hose thread outlet. The sillcock drains automatically upon water shut off, if the hose is removed or open..
Check Stock

MAS Epoxies Deep Pour Epoxy Resin Kit - Crystal Clear, Slow Curing Epoxy Resin for Casting, River Tables, Encapsulating, Live Edge Slabs, Molds, Filling Voids, Cracks (4 Gallon)

  • DEEP POUR EPOXY RESIN AND HARDENER KITS for river tables, live-edge slabs, casting, deep resin molds, art, embedding, encapsulating and filling large voids and cracks in wood.
  • cures to a 100% solid and is sandable and machinable once fully cured..
  • CRYSTAL CLEAR EPOXY RESIN self-levels to creates a high-gloss, glass-like finish on prepared wood, concrete, stone, ceramic and metal surfaces.
  • great for deep casting and molding projects to create unique sculptures, figurines, jewelry and more.
  • MAX CASTING THICKNESS UP TO 1" THICK PER POUR: Pour single layers of resin up to 1/2” thick for larger casting applications such as slab and river table pours, and up to 1" thick for smaller molds.
  • for pours over 1” thick per layer, try MAS Epoxies Deep Pour X (sold separately).
  • EASY TO USE, EASY TO TINT: Simple mix ratio of 3 parts epoxy resin to 1 part hardener, and extended working time make it easy to use. Pour clear or add color, tint mixed liquid epoxy with mica powder, translucent dyes, alcohol ink pigments and other epoxy-safe colorants.
  • LOW VOC, LOW ODOR RESIN IS AVAILABLE I....
Check Stock

Hi-Temp Lab Metal 24 oz

  • One-part metal putty able to withstand temperatures to 1000F.
  • Can be machined, ground, filed, and sanded..
  • Repairs items prior to lengthy or repeated powder coating processes..
  • Ideal for repairs in powder coating, metalworking, welding, fabricating, heating, construction, die casting, and mold refinishing.
  • Used to repair fabricated parts, core boxes, boilers, mufflers, exhaust systems, molds, wood and coal burning stoves, grills, engines, radiators, and industrial ovens..
Check Stock

2 Kg Graphite Ingot Mold Silver Gold Ingot Mould Casting Ingot Crucible Mould for Gold Silver Metal Aluminum Copper Brass Melting Casting Refining, 85 x 45 x 30 mm (2)

  • Ingot size: you will receive 2 pieces graphite ingot molds, approx. 85 x 45 x 30 mm/ 3.35 x 1.77 x 1.18 inch in internal size and 100 x 60 x 40 mm/ 3.93 x 2.36 x 1.57 inch in external size, which can hold 2000 g gold or 1060 g silver for casting, meet your demand for quantity, allow you to easily and efficiently purify metal materials.
  • Composition details: casting ingot crucible moulds are mainly made of graphite material, almost no ash content, to ensure that the metal refining process does not affect the purity of the metal.
  • They are durable and sturdy, reliable and reusable, not easy to break or deform, you can use them for a long time.
  • Multiple purposes to meet: these graphite ingot molds are widely and commonly applied for experiments and smelting of non-ferrous metals, such as gold, silver, copper, aluminum, and much more, also ideal for satisfying lab, test analysis and other purposes.
  • Taking the product size into account, small-capacity metal melting projects will be more suitable.
  • Characteristics of moulds: these metal casting ingot crucible moulds are completed with exquisite craftsmanship and possess general purpose, can meet your daily needs.
  • They are endowed with thermal stability, fast heating and cooling ability, nice corrosion resistance....
Check Stock

4 Pieces Graphite Ingot Mold Stir Rod Stick Set, 5-in-1 Graphite Casting Ingot Mold Coin Combo Metal Refining Scrap Mold, 1 KG Graphite Ingot Crucible Mould, 2 Graphite Stir Rod Stick for Melting

  • "What you get: this package includes 1 piece of 5-in-1 graphite casting ingot mold, 1 piece of 1 kg graphite ingot crucible mould, and 2 pieces of graphite stir rod sticks, totally 4 pieces in 1 package, convenient combination set to meet your DIY needs for melting casting refining metal jewelry gold silver".
  • "Size information: the 5-in-1 metal refining scrap mold measures about 72 x 57 x 12 mm, and the 1 kg crucible mould is 100 x 50 x 25 mm in outer diameter, and 90 x 40 x 20 mm in inner diameter.
  • Each crucible stir rod is about 12 inches/ 30 cm long, and 5/16 inch/ 0.8 cm in diameter, please check these sizes carefully before purchasing".
  • "Wide range of applications: these graphite ingot molds are suitable for experiments and smelting of non-ferrous metals, including gold, silver, copper, aluminum, and so on, which are designed for lab, test analysis and other purposes.
  • Considering the product size, it is more suitable for small-capacity metal melting projects".
  • "Product advantages: these graphite casting molds are featured with nice thermal stability and corrosion resistance to strong acid and alkali, fast cooling, nice thermal conductivity properties can highly shorten the casting time and save energy".
  • "Nice material: these melting casting molds ar....
Check Stock

DuraChoice Stainless Steel 316 in-Line Spring Check Valve - 150 lb Class

  • Suitable for full range of liquids and gas.
  • Temperature range: -60 to 450 degree Fahrenheit.
Check Stock

TotalBoat Thickset Deep Pour Epoxy Resin Kit (8 Gallon) - Crystal Clear Thick Pour Resin for Art, Casting, Epoxy River Tables, Live Edge Slabs, Molds, Wood

  • DEEP POUR EPOXY RESIN AND HARDENER KITS for river tables, live-edge slabs, casting, deep resin molds, art, embedding, encapsulating and filling deep voids in wood.
  • waterproof resin cures without shrinkage, cracking or yellowing.
  • CRYSTAL CLEAR EPOXY RESIN self-levels to creates a high-gloss, glass-like finish on prepared wood, concrete, stone, ceramic and metal surfaces.
  • great for deep casting and molding projects to create unique sculptures, figurines, jewelry and more.
  • POUR EPOXY UP TO 1″ THICK PER SINGLE LAYER: Pour single layers of resin up to 1/2″ thick for larger casting applications such as slab and river table pours, and up to 1″ thick for smaller molds.
  • for even deeper pours per layer, try Total Boat ThickSet Fathom (sold separately).
  • EASY TO USE, EASY TO TINT: Simple mix ratio of 3 parts epoxy resin to 1 part hardener, and long working time make it easy to use.
  • to add interest, tint mixed liquid epoxy with mica powder, universal tints, alcohol ink pigments and other epoxy-safe colorants.
  • LOW VOC, LOW ODOR RESIN IS AVAILABLE IN FOUR SIZES: 1.3 Quart Kit (1 qt resin, 1/3 qt hardener), 1.3 Gallon Kit (1 gal resin, 1/3 gal hardener), 4 Gallon Kit (3 gal resin, 1 gal hardener) and 8 Gallon Kit (6 gal resin, 2 gal hardener).
Check Stock

GAMPRO American Flag Microfiber Leather PU Car Keychain Accessories with Zinc Alloy Fashion keychain suit for men and women

  • Material: The material is of high quality and the metal part is made of new high strength alloy. It is beautiful in appearance, durable, scratch-proof and rust-proof..
  • Leather: The leather part is made of microfiber leather PU, which has feel more comfortable, high toughness, not easy to damage, and wear resistance.The die-casting process and the sews are exquisite and delicate..
  • Printing Pattern: The printing pattern is clear and stereoscopic, and will not easy be scratched. The pattern is simple and generous, suitable for many occasions..
  • Wide Range Of Uses: used for car keys, motorcycle keys, family keys, can also be hung on the bags, pants or held in the hand for decoration..
  • For Gift: Built-in logo-no fading, good texture. The overall metal is dark gray, very elegant and atmospheric. Overall delicate and durable. It is very suitable as a gift for family and friends..
Check Stock

Alltrade Powerbuilt 647580 3 Ton Low Profile Service Jack

  • Lifting Range: 90mm-510mm, 3-1/2" - 20" 55cm.
  • Cushion Handle Square Casting Steel Saddle.
  • Low profile design for use under lowered vehicles and ground effects.
  • Works on regular cars and trucks as well.
  • Heavy duty 360 degree rear swivel casters and knurled handle for easy positioning.
Check Stock

TotalBoat ThickSet Deep Pour Epoxy Resin Kit 1.3 Gallon - Crystal Clear Thick Pour Resin for Art Casting Epoxy River Tables Live Edge Slabs Molds Wood

  • DEEP POUR EPOXY RESIN AND HARDENER KITS for river tables, live-edge slabs, casting, deep resin molds, art, embedding, encapsulating and filling deep....
  • CRYSTAL CLEAR EPOXY RESIN self-levels to creates a high-gloss, glass-like finish on prepared wood, concrete, stone, ceramic and metal surfaces.
  • POUR EPOXY UP TO 1" THICK PER SINGLE LAYER: Pour single layers of resin up to 1/2″ thick for larger casting applications such as slab and river....
  • EASY TO USE, EASY TO TINT: Simple mix ratio of 3 parts epoxy resin to 1 part hardener, and long working time make it easy to use.
  • LOW VOC, LOW ODOR RESIN IS AVAILABLE IN FOUR SIZES: 1.3 Quart Kit (1 qt resin, 1/3 qt hardener), 1.3 Gallon Kit (1 gal resin, 1/3 gal hardener), 4....
Check Stock

3 Pieces Heart Star Cross Graphite Casting Ingot Mold Metal Refining Scrap Melting Casting Mould for Smelting Gold Silver Metal Aluminum Copper Brass Zinc

  • Quality Graphite Material: made of quality graphite material, the ingot molds won't affect the metal purity during the metal refining process.
  • Fast cold and hot conditions, with good thermal stability, producing exquisite refining effect for you.
  • Detailed Size Information: the outside dimension of heart graphite casting mold is about 50 x 50 x 20 mm/ 1.97 x 1.97 x 0.79 inch, the inner is about 10 mm high.
  • The cross graphite casting mold is about 88 x 47 x 8 mm/ 3.45 x 1.85 x 0.31 inch, the inner is 63 x 38 x 4 mm/ 2.48 x 1.5 x 0.16 inch.
  • The star graphite casting mold is 50 mm/ 1.97 inches in length and width, 11.45 mm/ 0.45 inch on each side, proper in size for you to cast metal and make your own jewelry.
  • Good Performance: the graphite molds for casting metal has nice thermal stability, which can withstand 2000 degrees Celsius, shorten the melting time and save energy, has good impact resistance and corrosion resistance to acid and alkali, good in performance to ensure the reliability of product quality.
  • A Wide Range of Application: the casting ingot mold has a wide range of application, suitable for experiments and melting of non ferrous metals, such as gold and silver, brass, copper, aluminum, zinc and so on, they can also be applied for test analysi....
Check Stock

Sougayilang Fishing Rod and Reel Combo, Medium Heavy Fishing Pole with Baitcasting Reel Combo, 2-Piece Baitcaster Combo-Purple-5.9ft and Left Handle Reel

  • ...harp and crisp rod control for the angler..
  • Excellent Components - The all-new TES series of fishing rods provides anglers with a revamped and eye-catching aesthetic to deliver tournament-level performance and versatility to cover any technique. The comprehensive series of casting rods and spinning rods updates upon the previous Sougayilang fishing rods and now features titanium oxide guides, reference line between 2 sections, cork grip handles with etched logos to provide anglers all-day comfort and added performance..
  • Baitcasting Reel - Corrosion resistant casting reel designed for super smooth casting and a longer life. The integrated metal rocker arm is sturdy and durable. 7.2:1 gear ratio with CNC machined gear, which makes it more smooth and durable. Brilliant anodized aluminum forged so that it has the state of the fast brakes, which makes you enjoy the fun of fishing perfectly..
  • Easy Travel and Storage – The baitcasting rod is made in 2 pieces for easy storage and travel. This makes taking the casting rod with you simple and easy. Go fishing by bike to your favorite lake, or put a baitcaster fishing rod combo on y....
Check Stock