Categories

Best Ansi Nail Fastener

Sunex Tools 1874 1/4' Drive Master Fractional and Metric Impact Sockets Set

  • CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools..
  • RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners..
  • CHAMFERED OPENING: Quickly aligns fastener to socket..
  • DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification..
  • HEAVY DUTY STORAGE CASE: Convenient impact socket transport and storage..
  • MEETS ANSI STANDARDS: All sockets are rigorously tested, ensuring peak performance and durability..
  • SAE: 3/16” to 9/16” and METRIC: 4mm to 15mm.
  • FULL COMPLEMENT OF EXTENSIONS: Provides access to virtually all recessed fasteners..
  • UNIVERSAL JOINT: Adapts any socket for use in swivel applications..
Check Stock

GEARWRENCH 12 Pc. 12 Point XL GearBox Double Box Ratcheting Metric Wrench Set - 85988

  • XL GearBox design has a longer beam to increase leverage and torque.
  • Bright, full polish chrome finish for rust prevention and easy cleaning, oil and dirt wipes right off.
  • 0° offset and slim profile to access the tightest spaces and recessed fasteners.
  • Off-corner loading design on box end for better grip and reduced fastener rounding.
  • Ratcheting box end needs as little as 5° to move fastener as opposed to 30°.
  • Standard box end combined with the long pattern length gives this wrench excellent torque capabilities to break a stubborn fastener.
  • Long bolts and threaded rods are not a problem, the ratcheting head allows the wrench to travel the length of the threads without removing the box end from the fastener.
  • Wrenches come with a blow molded tray that keeps tools organized and can be hung on a wall or kept in your tool box or roll-away cabinet.
  • Extremely strong, GEARWRENCH meets or exceeds ANSI, ASME, DIN, and federal torque specifications.
Check Stock

1/2 Inch Drive x 35 mm 6-Point Impact Socket

  • Size is marked both with a high-visibility laser marking and a permanent stamped marking that won't wear off.
  • 6-point socket opening provides an exact fit for hex fasteners.
  • Radiused corners prevent fastener round-off by applying force to a fastener's flat sides, rather than its corners.
  • Meets a minimum of 1.3 times the ANSI/ASME standard for proof torque.
Check Stock

TEKTON 1/2 Inch Drive x 33 mm Deep 6-Point Impact Socket | SID23133

  • Size is marked both with a high-visibility laser marking and a permanent stamped marking that won't wear off.
  • 6-point socket opening provides an exact fit for hex fasteners.
  • Radiused corners prevent fastener round-off by applying force to a fastener's flat sides, rather than its corners.
  • Meets a minimum of 1.3 times the ANSI/ASME standard for proof torque.
Check Stock

TEKTON 1/2 Inch Drive x 36 mm Deep 6-Point Impact Socket | SID23136

  • Size is marked both with a high-visibility laser marking and a permanent stamped marking that won't wear off.
  • 6-point socket opening provides an exact fit for hex fasteners.
  • Radiused corners prevent fastener round-off by applying force to a fastener's flat sides, rather than its corners.
  • Meets a minimum of 1.3 times the ANSI/ASME standard for proof torque.
Check Stock

Sunex 224XD, 1/2 Inch Drive, 3/4 Inch Extra Long Deep, Impact Socket, Cr-Mo Alloy Steel, Radius Corner Design, Dual Size Markings

  • - EXTRA LONG DEEP: Provides more reach to the nut and engine studs, making it useful for cable tension applications..
  • - CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools..
  • - RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners..
  • - CHAMFERED OPENING: Quickly aligns fastener to socket..
  • - DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification..
  • - MEETS ANSI STANDARDS: All sockets are rigorously tested, ensuring peak performance and durability..
Check Stock

Sunex 1818, 1/4 Inch Drive Master Magnetic Socket Set, 23-Piece, SAE/Metric, 3/16' - 1/2', 5mm-15mm, Cr-Mo Steel, Heavy Duty Storage Case, Includes Universal Joint & 2” Extension

  • MAGNET: Better keeps the fastener in the socket..
  • CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools..
  • RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners..
  • CHAMFERED OPENING: Quickly aligns fastener to socket..
  • DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification..
  • HEAVY DUTY STORAGE CASE: Convenient impact socket transport and storage..
  • MEETS ANSI STANDARDS: All sockets are rigorously tested, ensuring peak performance and durability..
  • SAE: 3/16” to ½” & METRIC: 5mm to 15mm.
  • 2” EXTENSION: Provides access to recessed fasteners..
  • UNIVERSAL JOINT: Adapts any socket for use in swivel applications..
Check Stock

Superior Parts SP 885-827A Aluminum Magazine for Hitachi NR83A & NR83A2 Framing Nailers

  • Fastener Type: full round head, plastic strip collation, shoots 3-1/2" Nails.
  • Fastener length capacity: 2" To 3-1/2", nose guard included.
  • Fastener diameter range: 0. 113" To 0. 148”, installed nail FEEDER and ribbon spring.
  • Magazine angle: 21 degrees, available as assembly only.
  • Magazine capacity: 70, comes in blister packaging, MAGAZINE loading: top.
Check Stock

Air Locker AL83V3 3-1/4 Inch Full Round Head Coil Framing Nailer

  • Side load pop-out magazine for fast and easy reloads | Cylinder valve drive system for rapid response and increased durability.
  • Tool-less depth or drive adjustment for ­flush fastening in varying materials | Open nose design for easy extraction of a jammed nail | Ergonomic non-slip rubber grip on handle helps maintain a secure hold and comfort during use.
  • Specification: | Nail Capacity: 225-300 | Fastener Length: 2" - 3-1/4" | Fastener Diameter: 0.099" - 0.131" | Magazine Angle: 16° +/- 1° | Collation: Wire | Operating Pressure: 70-120 PSI | Firing Mode: Contact Actuation Trigger.
  • Applications: | Wall sheathing | Roof decking | Subflooring.
  • Mobile and modular home construction | Making of wooden boxes | Pallets and drums | Packing operations.
Check Stock

TEKTON 1/2 Inch Drive x 34 mm 6-Point Impact Socket | SID22134

  • Size is marked both with a high-visibility laser marking and a permanent stamped marking that won't wear off.
  • 6-point socket opening provides an exact fit for hex fasteners.
  • Radiused corners prevent fastener round-off by applying force to a fastener's flat sides, rather than its corners.
  • Meets a minimum of 1.3 times the ANSI/ASME standard for proof torque.
Check Stock

Sunex 9707MA Jumbo Metric Combination Wrench Set, 7Piece (Includes Roll-Case) CRV

  • RADIUS CORNERS: Grip the flat sides of the fastener head instead of the corner to prevent round-off..
  • RAISED PANEL DESIGN: Reduces the weight of the tool while maintaining overall strength..
  • CHROME PLATING: For strength and the prevention of rust, corrosion and deformation..
  • EASY IDENTIFICATION: Sizes stamped on both sides for fast and easy identification..
  • ANSI STANDARDS: Heat treated and tempered to meet or exceed ANSI Standards for strength..
Check Stock

TEKTON 1/2 Inch Drive x 34 mm Deep 6-Point Impact Socket | SID23134

  • Size is marked both with a high-visibility laser marking and a permanent stamped marking that won't wear off.
  • 6-point socket opening provides an exact fit for hex fasteners.
  • Radiused corners prevent fastener round-off by applying force to a fastener's flat sides, rather than its corners.
  • Meets a minimum of 1.3 times the ANSI/ASME standard for proof torque.
Check Stock

TEKTON 1/2 Inch Drive x 19 mm Deep 12-Point Impact Socket | SID23319

  • Size is marked both with a high-visibility laser marking and a permanent stamped marking that won't wear off.
  • 12-point socket opening provides an exact fit for 12-point fasteners.
  • Radiused corners prevent fastener round-off by applying force to a fastener's flat sides, rather than its corners.
  • Meets a minimum of 1.3 times the ANSI/ASME standard for proof torque.
Check Stock