Categories

Best Ansi Seated Gate Valve

15x Heavy Duty Lockout Hasps 1.5inch Tagout Kit Safty Clamp Red

  • 【Save Water Bill】Are you worried about someone accessing your water without authorization? Well, Gate Valve Lock to solve your problem. The hollow circular housing fits perfectly over the handle of the faucet, insert a padlock and lock it, no more stealing water! And prevent others from using my water pipe.（Please confirm the size of the faucet and the product before purchasing to ensure that the product fits your faucet perfectly.).
  • 【Well Built】Our valve locks are made of ABS, an engineering material that is impact resistant and can withstand rough and harsh environments without cracking. When locked, the device is enclosed in the valve handwheel and can rotate freely to prevent the handwheel from opening accidentally..
  • 【Reliable Fit】Suitable for 1 to 2-1/2 inch diameter gate valve handle with up to 3/4 Inch Diameter Stems, can accommodate padlock shackle with max 3/8 inch outside diameter..
  • 【Bright and easy to follow】1 set of 2 red gate valve locks. Highly visible and eye-catching, no longer worry about being stolen water. (Note: locks and keys are not included, please purchase your own if needed.).
  • 【Application】It is suitable for outdoor faucets and used in combination with padlocks to help protect against valve opening during ma....
Check Stock

Wilkins 115-975XL2 1.5-Inch Lead Free Reduced Pressure Backflow Preventer

  • Reduced pressure principle backflow preventer consisting of a pressure differential relief valve located between twoindependently operated spring-loaded center guided check valves, “Y” pattern body.
  • Complete with two full port resilient seated ball valves for shut-off and four resilient seated ball valve test cocks.
  • Pre-plumbed backflow station. Assembly can be of the reduced pressure principle or of the double check type.
Check Stock

JIELI 1800lb Chain Driven Automatic Sliding Gate Opener with 4 Remote Controls, Gate Openers with Remote Complete kit for Sliding Gate Up to 40 Feet，Electric Rolling Driveway Slide Gate Motor

  • FEATURES —JIELI motor for electric gate with powerful 370W AC motor, made of pure copper is durable and reliable.Have a bigger starting force and pulling force,designed for heavy duty driveway gate openers up to 1800 LBS and 40 ft in length..
  • ADVANTAGE—Remote gate openers built-in thermal protector, when the temperature reaches the rated value, electric gate openers automatic power off, to avoid the gate opener motor from burning. In case of power failure, the clutch can be opened and closed manually..
  • GATE OPENER REMOTE— Electric gates for driveways with 4 remote controls， use of the most advanced encoding and decoding technology, it has higher security and confidentiality. The remote control distance is 100 feet, with 4 buttons for opening/closing/stop opening/closing stop.Only suitable for JIELI automatic sliding gate openers..
  • CHAIN— Slide gate opener kit equipped with two chains（total length is 19.68ft）.IF you need to extend more chains, select ANSI #428 size roller chain sprockets..
  • AC SLIDING GATE CONTROLLER —Driveway gate openers using special Hall components for stroke,no need to distinguish between upper limit and lower limit..
Check Stock

JIELI JY7 Automatic Sliding Gate Opener with 4 Remote Controls, Gate Operator Hardware Kit for Sliding Gate up to 1400 Pounds,Electric Rolling Driveway Slide Gate Motor

  • ...sing/stop opening/closing stop.Only suitable for JIELI automatic sliding gate openers. 4 remotes are standard, up to 300 remotes can be equipped..
  • CHAIN--- Slide gate opener kit equipped with two chains（total length is 19.68ft）.IF you need to extend more chains, select ANSI #428 size roller chain sprockets..
Check Stock

GOVALVE Heavy Duty Gate Valve - 1\ NPT Stainless Steel Female x Female Thread Rotary Sluice Valve with Wheel Handle 200WOG For Water Oil Gas

  • MATERIAL: Gate valve is made of 304 stainless steel. Anti-rust and anti-corrosion, sturdy and durable for long time use..
  • FULL PORT: The full bore will not limit the flow and has small resistance to the flow..
  • WHEEL HANDLE: Easy to operate. Whether opened or closed, the movement direction of the gate is perpendicular to the medium flow direction..
  • NPT THREAD: Ensure gate valve tightness and good compatibility with other material thread pipes..
Check Stock

RP22734 Replacement Bonnet Nut Compatible with Delta R10000 Shower Valve

  • Compatible with Delta R10000 series shower valve.
  • Good build quality and come with solid, clean threads.
  • Must use a wire brush to clean-up the threads on the valve body & wipe off any grit before install bonnet nut. If clean, nut should turn easily and snug up without excessive force.
  • Recommend to replace bonnet when replacing cartridge so that you can assure seals are properly seated/compressed in the valve body.
Check Stock

DuraChoice 2\ Brass Gate Valve - 200WOG, FxF NPT

  • Made of high quality brass material, this gate valve is sturdy and durable..
  • The internal fluid path of valve body is straight through which allows fluid to flow in a straight line and the flow resistance is small..
  • It's easier to open and close, because the movement direction of the gate is perpendicular to the flow direction, whether on or off..
  • It is suitable for water, oil, gas, steam, etc..
  • Widely used in mechanical equipment, chemical equipment, industrial equipment, water supply and drainage equipment, pharmaceutical equipment, petrochemical equipment, etc..
Check Stock

RP64851 Replacement Bonnet Nut Compatible with Delta R11000 Shower Diverter Valve

  • Compatible with Delta R11000 shower diverter valve.
  • Good build quality and come with solid, clean threads.
  • Must use a wire brush to clean-up the threads on the valve body & wipe off any grit before install bonnet nut. If clean, nut should turn easily and snug up without excessive force.
  • Recommend to replace bonnet when replacing cartridge so that you can assure seals are properly seated/compressed in the valve body.
Check Stock

EUREKA ERGONOMIC Chair - Executive Office Swing Chair – Black

  • The Swing Chair’s path of motion is designed using the most current ergonomic research information and is certified by the American National Standards Institute and the Human Factors & Ergonomics Society (ANSI/HFES 100).
  • The only chair in the world where the center of rotation (CR-1) of the chair is approximate to that of natural human seated posture.
  • Provides natural human motion when you are seated, allowing you to work in comfort, while reducing the stress on your back, neck, legs, and hips.
  • Maximum weight capacity - 300 pounds.Imported leather seats, soft and comfortable.and the legs of the one-piece aluminum alloy give you a wonderful experience in the office..
  • Weight tested up to 300 lbs with no loss in performance. Dimensions are 28.54“ (W) x 26.38" (D) x 46.46-49.61" (H) inches.
Check Stock

Gate Sensor Wireless Vehicle Exit Sensor Gate Exit Wand for Driveway with Sensing Range Adjustment Five Wire Universally Compatible Detector and Works with Mighty Mule mmdia30d Gate Opener Accessories

  • OPEN GATES EFFORTLESSLY! No more remote control or keypad button to trigger your driveway gate openers. Just drive past the buried wand, the gates....
  • UNIVERSALLY COMPATIBLE with 100 ft CABLE Universally compatible with most automatic driveway gate opener systems. Mighty Mule mmdia30d Gate Opener and....
  • SENSE YOUR CAR, NOT YOUR LAWN MOVER! Unlike competition gate sensors, our device has a RANGE ADJUSTMENT board to prevent false gate opening by lawn....
  • FCC COMPLIANT Meets FCC standards 47CFR part 15 and ANSI C63.4-2014. Do check if other brands comply with FCC standards.
  • EASY SET UP IN A FEW MINUTES Comes with a VISUAL INSTRUCTION MANUAL for easy set up. In the unlikely event you aren’t delighted with the product,....
Check Stock

Master Lock 481 Lockout Tagout Rotating Gate Valve Lockout

  • Best used for valve lockout applications as part of a comprehensive OSHA compliant lockout tagout safety program.
  • Surrounds the valve operating handle to protect against accidental valve opening.
  • Unique, patented outward/inward rotation allows for easier installation.
  • Tough, lightweight and dielectric Zenex thermoplastic body withstands chemicals and performs effectively in extreme conditions.
  • 1-1/2 in. (38 mm) depth and 1-1/2 in. (38 mm) wide opening that fits 2 in. (51 mm) to 5 in. (127 mm) diameter valve handles.
  • Includes one rotating gate valve lockout tagout device with high visibility safety labels (English, French & Spanish).
Check Stock

TRADESAFE Gate Valve Lockout Device, 1\ to 2-1/2\ Diameter, 2 Pack, Lock Out Tag Out OSHA Compliant Valve Locks for Professional and Industrial Use

  • 2 Premium Quality Industrial Grade Thermoplastic Gate Valve Lockouts.
  • Fits 1" to 2-1/2" Diameter Gate Valve Handles with up to 3/4" Diameter Stems.
  • OSHA COMPLIANT: Lockout Tagout for Standard Gas, Propane, and Water Valves, Plus Forklift Gas Valves.
  • INDUSTRIAL USE: Intended for Professional and Industrial purposes (not recommended for household use).
  • TRUSTED LOCKOUT SUPPLIER: Real USA Based Safety Company.
Check Stock

Water spigot lock,very strong outdoor faucet cover lock,gate ball valve lockout

  • High quality structure:made of ABS engineering plastics. High temperature resistance and impact resistance.
  • Suitable for 1“-2.5“ diameter valve handle（Please confirm the size of the valve handle diameter and the product before purchasing to ensure that the product fits your valve handle diameter）.
  • A hollow circular shell surrounds the handle of the gate valve and needs to be used with a padlock to help prevent the valve from opening during maintenance and repair.
  • Note: lock and key are not included. If necessary, please purchase valve lock with padlock and warning tag.
Check Stock