Categories

Best Anti Wear Hydraulic Fluid

Johnsen's 5594 Hydraulic Jack Oil - 32 oz.

  • STA-LUBE: Sta-Lube offers a range of high performance industrial greases, gear oils, service oils, fluids, hand cleaners, additives, and lubrication formulas. Our products have been rigorously tested to meet the highest quality standards..
  • HYDRAULIC & JACK OIL: Our formula is a medium weight hydraulic oil blended of a high quality paraffinic base oil with anti-rust, anti-oxidation, anti-foam, anti-wear, and seal swell additives..
  • FORMULATION: This oil is a 20W, non-detergent oil that is compatible with all hydraulic fluids, and protects all parts in hydraulic jacks over a wide temperature range..
  • APPLICATIONS: Our hydraulic oil can be used for hydraulic systems and fluid drive units, and added to existing fluids. However, it is not suggested for use in hydraulic brakes..
  • PRODUCT SPECIFICATIONS: Available in a 32 fl. oz. or 1 qt bottle, and is made in the USA..
Check Stock

Power Up HydraMaxx Hydraulic Fluid Additive 1 Quart Bottle

  • Viscosity Index Improvers: Enhanced VII maintain lubricant flow and improve shear stability of the oil, especially at extreme temperatures..
  • Water Demulsifiers: Improves fluid ability to separate from water, virtually eliminating hydraulic issues related to water..
  • Pour Point Depressants: Reduce the pour point and improve flow at low temperatures..
  • Detergents and Dispersants: Enhances the fluid's ability to clean and disperse contaminants..
  • Extreme Pressure/Anti-Wear additives: Polarized AW, Friction Modifier and EP components provide unequaled protection for pumps, pistons, and sleeves. Fluid strength in increased allowing for significant friction reduction and protection of vital hydraulic components. Polarized film protects pumps during start up conditions..
Check Stock

IMAGNET PSF 90g. Power Steering Repair Fluid/Automotive Power Steering Additives/Power Steering Additives/Power Steering Restore/Power Steering Treatment/

  • Reduces noise of hydraulic pump, caused by increased wear of main parts.
  • Restores antioxidant properties of hydraulic fluid.
  • Solves the Tight steering wheel problem, by restoring the pressure of pump and by reducing the leaking of fluid.
  • Does not affect the seals of steering rail.
Check Stock

Stens 120-345 Oil Filter, Replaces Kohler 52 050 02-S , Black

  • For Industrial, Construction and Apricultural Equipment.
  • Anti-Wear hydraulic fluid designed to maximize application performance.
  • Built to prevent wear, rust and corrosion of hydraulic components.
  • Superior water seperation properties for removal of water.
Check Stock

Duragard Synthetic Blend Universal Hydraulic Tractor Fluid - 5 Gallon Pail

  • OEM FLUID COMPATIBILITY - Replaces 99% of OEM fluids| Compatible with all tractor fluids for agricultural and construction applications in hydraulic systems, wet brake packs/clutches, and hydro-static transmissions. Compatible with J20C, J20D, Cub Cadet, Mahindra, John Deere and Kubota UDT and Super UDT Synthetic..
  • FULL SYNTHETIC - Double or triple the life of most other tractor fluids with very high film strength and outstanding oxidation stability..
  • OUTSTANDING OPERATIONAL PERFORMANCE - Perfect engagement of clutch packs, fluid shifting, and hydraulic operation. Exceptionally low wear for bevel and spiral gears. Significantly extends hydraulic pump life..
  • TRUE ALL-SEASON - 175 viscosity index makes this fluid an outstanding choice for both very high and very low ambient temperatures. Assures continuous pumpability and system-wide lubrication down to -52F. It will flow in the coldest winters on the planet..
  • LOW COST PER HOUR - Coupled with extreme longevity, very high component wear protection, seal protection, and incredible versatility it assures the lowest cost possible per hou....
Check Stock

Mobil Super 96819 15W-40 Delvac 1300 Motor Oil - 1 Gallon (Pack of 4)

  • OEM FLUID COMPATIBILITY - Replaces 99% of OEM fluids| Compatible with all tractor fluids for agricultural and construction applications in hydraulic systems, wet brake packs/clutches, and hydro-static transmissions. Compatible with J20C, J20D, Cub Cadet, Mahindra, John Deere and Kubota UDT and Super UDT Synthetic..
  • FULL SYNTHETIC - Double or triple the life of most other tractor fluids with very high film strength and outstanding oxidation stability..
  • OUTSTANDING OPERATIONAL PERFORMANCE - Perfect engagement of clutch packs, fluid shifting, and hydraulic operation. Exceptionally low wear for bevel and spiral gears. Significantly extends hydraulic pump life..
  • TRUE ALL-SEASON - 175 viscosity index makes this fluid an outstanding choice for both very high and very low ambient temperatures. Assures continuous pumpability and system-wide lubrication down to -52F. It will flow in the coldest winters on the planet..
  • LOW COST PER HOUR - Coupled with extreme longevity, very high component wear protection, seal protection, and incredible versatility it assures the lowest cost possible per hour of operation..
Check Stock

Interstate Pneumatics YL30-016 Non Detergent Compressor/Pressure Washer Pump Oil 30 Wt. – ISO 100-S (16 oz.)

  • Extended oil & equipment service life - Special anti-wear additive package reduces wear by protecting surfaces when load causes breakdown of the lubricant film. High oxidation stability resists oil thickening and deposit formation in service, eliminating the need for unscheduled change of hydraulic fluid.
  • Reduced downtime - Effective rust and oxidation inhibitor system prevents the production of abrasive particles from rust formation, and deposits, varnishes and sludges from oil breakdown, which can damage equipment surfaces and seals, and block filters prematurely.
  • Trouble-free operation - Good hydrolytic stability and water separation characteristics provide excellent filterability in the presence of water contamination. Good anti-foam and air release properties ensure smooth operation and system efficiency.
  • Anti-wear protection | Oxidation and corrosion inhibition | Foam and aeration suppression |.
  • Under moderate loads and temperatures, this high viscosity index of Chevron assures good film strength between metal surfaces and is further enhanced by anti-wear additive protect....
Check Stock

Hein-Werner HW93291 Blue Premium Hydraulic Jack Oil - 1 Quart

  • Bio-Bottle Jack hydraulic fluid is a biobased, biodegradable and environmentally non-toxic hydraulic oil for use in general purpose hydraulic systems.
  • Specially designed to be a direct replacement for petroleum oil based hydraulic fluids in mobile and stationary hydraulic vane, piston and gear type pumps.
  • This patented technology provides superior oxidation stability and longer fluid life compared to other vegetable based hydraulic oils.
  • It meets or exceeds the requirements for type I, II and III hydraulic tools.
  • Bio-Bottle Jack hydraulic fluid is ultimately biodegradable1 vegetable based formula.
Check Stock

Maxima Racing USA 80-86916 DOT 4 Brake Fluid

  • Non-silicone based, long life and 100% synthetic, DOT 5.1 BRAKE FLUID conforms to the highest standards in brake fluid performance..
  • DOT 5.1 is specially designed for Anti-Locking Brake Systems (ABS)..
  • With a high dry boiling point of 270C and a high wet boiling point of 185C, DOT 5.1 delivers the best brake performance..
  • 100% synthetic, polyglycol-based. Specially designed for anti-locking brake system (ABS)..
  • Compatible with All types of hydraulic actuated brakes and clutch systems (not to be used with silicon and mineral-based brake fluids)..
Check Stock

Motul 105776 Set of 4 Dexron III Automatic Transmission Fluid 1-Liter Bottles

  • For use in all systems where DEXRON or MERCON standard is required. // For automatic gearboxes/torque converters/power steering systems/boat reversing gears/hydrostatic transmissions/hydraulic or mechanical systems that require DEXRON or MERCON standards..
  • MOTUL DEXRON III can be used (and mixed) for applications where DEXRON/B DEXRON/DEXRON II D/DEXRON IIE/DEXRON III is required..
  • Technosynthese ATF features more fluid at low temperature than Dexron IIE oils, which allows easier gear change in cold weather..
  • Higher oxidation resistance than Dexron IIE standard. // Oil film stability under high temperature. // Anti-wear, Anti-corrosion, Anti-foam..
  • Color: Red. // Density at 20°C (68°F): ASTM D1298. // Viscosity at 40°C (104°F): ASTM D445/33.4 mm²/s. // Viscosity at 100°C (212°F): ASTM D445/7.2 mm²/s. // Viscosity Index: ASTM D2270. // Flash Point: ASTM D92/204°C/399°F. // Pour Point: ASTM D97/-48°C/-54°F..
Check Stock

Chief Directional Control Valves 1 Spool 4 Way 4 Position - Hydraulic Directional Control Valve with Spring Center - 25 GPM, 1/2\ NPT Work Port, 3/4\ NPT Outlet Port, 3000 PSI, 16 lb, 220572

  • SPECIFICATIONS: The Chief P40 manual Directional Control Valve for hydraulic systems has a 4 way, 3 pos tandem center with 10 GPM, maximum working pressure of 3625 PSI, temperature of 176°F, standard SAE 8/10 inlet/outlet ports. It weighs 9.4 lb..
  • FAST ACTING: Our 4 way hydraulic control valve has 4 ports that facilitate super fast extension and retraction of double-acting hydraulic cylinders, producing sufficient pressure required in a wide range of applications..
  • PRECISE: This directional control valve hydraulic has a two spool construction equipped with lands and undercuts. The precision machined construction allows the spools to open and close fluid flow paths effortlessly with high accuracy every time..
  • EFFICIENT: Our 3 pos, hydraulic directional control valve allows the hydraulic fluid back into the tank without forcing it over the relief valve, reducing heat generation and a buildup of backup pressure..
  • MULTIPURPOSE: The P40 hydraulic valves are extremely versatile and can perform several functions in their central position - they can easily unload hydraulic pumps, stop, allow, or change the direction of fluid flow in hydraulic circuits. Power beyond and closed center plugs may be added and are sold separately..
Check Stock

Amalie 160-62836-56 Ford Type F ATF Trans

  • Motorcraft MERCON V is a premium-quality automatic transmission fluid.
  • recommended by Ford Motor Company for use in Ford, Lincoln and Mercury vehicles that require either MERCON V or MERCON type fluid.
  • Do not use in applications where MERCON SP, MERCON LV, continuously variable chain type transmission fluid, Motorcraft premium automatic transmission fluid, FNR5 automatic transmission fluid or Type-F automatic transmission fluid is recommended.
  • Do not use in transfer cases where MERCON ATF was previously recommended.
  • Motorcraft MERCON V is suitable for use as a hydraulic oil in a wide variety of industrial applications that call for an ISO 46 or SAE 20W viscosity grade hydraulic oil.
Check Stock

Motorcraft Mercon SP XT-6-QSP transmission fluid case 12 quarts

  • Motorcraft MERCON V is a premium-quality automatic transmission fluid.
  • recommended by Ford Motor Company for use in Ford, Lincoln and Mercury vehicles that require either MERCON V or MERCON type fluid.
  • Do not use in applications where MERCON SP, MERCON LV, continuously variable chain type transmission fluid, Motorcraft premium automatic transmission fluid, FNR5 automatic transmission fluid or Type-F automatic transmission fluid is recommended.
  • Do not use in transfer cases where MERCON ATF was previously recommended.
  • Motorcraft MERCON V is suitable for use as a hydraulic oil in a wide variety of industrial applications that call for an ISO 46 or SAE 20W viscosity grade hydraulic oil.
Check Stock