Categories

Best Appliance Zwave

Door Window Alarm, Mini Wireless Door Window Sensor Alarm for Z-wave 300 500 Series with Motion Sensor Door Sensor Remote Control (US)

  • COMPATIBILITY: The Ecolink Door/Window is manufacturer tested to be compatible with the following ZWAVE Plus Home Automation HUBs or controllers: Samsung SmartThings Certified, V1, V2, V3. Vera Plus, Vera Edge, Vera Lite. Homeseer. Dlink staples connect. While it may work with your ZWAVE hub, Ecolink cannot guarantee it..
  • SIMPLE TO INSTALL: Easy installation by simply pulling the battery Tab to begin the Learning process. Natively compatible with SmartThings, it works with most brands of ZWAVE home security hubs. Features industry leading rare earth magnets that allow for up to a 5/8 inch sensor to magnet gap. Perfect for most door or window applications..
  • WHITE or BROWN housings INCLUDED: Both White or Brown plastic housing choice included to match any décor..
  • 3 YEARS BATTERY LIFE: Tamper sensing Premium design outlasts the competition and boasts a battery Life of up to 3 years..
  • Ecolink is a leading developer of low power, highly reliable wireless solutions, including a wide range of intelligent wireless security, sensing or home automation devices..
Check Stock

Honeywell Lynx Touch L7000 Wireless Residential/Commercial Security Alarm Kit with Wifi and Zwave Module

  • Updated Model with Newest Firmware and Software.
  • Wifi Connectivity for Remote and Monitoring Options (Requires Monthly Fee).
  • Zwave ready for Control of Lights, Door locks, Thermostats and Garage Doors.
  • Includes: (3) 5816 Door/Window Transmitters, (1) 5834-4 Four-Button Wireless Keyfob (1) 5800 Pir-Res Wireless Motion Detector (1) Wifi Module (1) Zwave Module.
Check Stock

Zwave Door Sensor Window Sensor, Z-Wave Plus Enabled Aeotec 3-1 Door Window Sensor 7 Pro, Zwave Hub Required, Gen 7, White (Door/Window Sensor 7 Pro)

  • Smallest 3-in-1 Zwave Door Sensor Window Sensor. MultiSensors include magnetic contact, dry contact relay, and a tilt sensor. The tilt detection must be in operation with the magnet sensor in its description.40% smaller than previous generation at only 2.8”x0.75”x0.7” (main body).
  • 3 year+ battery life powered by 1 x 1/2 AA battery. Optimised to use up to 66% less battery power to communicate than previous generations..
  • With a SmartStart enabled gateway, you can connect it to your ZWave hub by simply scanning its QR code. From there, stick it to your door and Door / Window Sensor 7 is ready to power your home and protect it..
  • Zwave Window Sensor 7 is powered by the speed enhancements that come from Z-Wave Plus and Z-Wave S2 enabling it to wireless communicate 50% faster and up to 67% further in real-world use..
  • Compatible with Samsung SmartThings, Vera, Zipabox, HomeSeer, Ring, Open Z-Wave, Nexia, Domoticz and more., Frequency: 908.40 MHz, 916.00 MHz, ID: ZC12-20080085.
Check Stock

Honeywell Wireless Lynx Touch L7000 Home Automation/Security Alarm Kit with WiFi, Zwave & GSM Module

  • Updated 2015 Model with Newest Firmware and Software.
  • Wifi Connectivity for Remote and Monitoring Options (Requires Monthly Fee).
  • Zwave ready for Control of Lights, Door locks, Thermostats and Garage Doors.
  • Includes: (3) 5816 Door/Window Transmitters, (1) 5834-4 Four-Button Wireless Keyfob (1) 5800 Pir-Res Wireless Motion Detector (1) Wifi Module (1) Zwave Module (1) 4gl GSM Cellular module.
Check Stock

Optex TD-20U Indoor/Outdoor Wireless Infrared Transmitter

  • Works with Windows / Mac / Linux / Raspberry Pi 4 (2020 upgrade) to create a zwave hub for control of Z-Wave plus and Zwave devices, Tiny but powerful.
  • 1.1 x 0.4 x 3.5 inches in size and capable of controlling up to 232 different Z-Wave devices. package: 1x Z-Stick Gen5, 1x Manual, the others are not included.
  • Can be used to upgrade the firmware of compatible Z-Wave Plus devices that can accept OTA / wirelss firmware upgrades.
  • Compatible with Z-Wave enabled, home automation software including Home Assistant, Home Seer, Indigo 7, OpenHab, and OpenHab2. No software included.
  • Z-Wave Plus certified. Certification number: ZC10-15060006.
Check Stock

Aeotec Range Extender 7, Zwave Extender and Repeater (One Pack)

  • WIRELESS ZWAVE REPEATER- Amplifies and repeats weak signals boosting the range and reliability of weak Z-Wave / Z-wave Plus devices. 250% further wireless range.
  • 50% FASTER Z-WAVE COMMUNICATION- Built upon Aeotecs unique Gen7 hardware and firmware stack, stable performance, achieving seamless automation.
  • SECURITY 2 SYSTEM COMPATIBLE- This particularly means it can amplify and repeat signals from security focussed devices, including door locks and smoke sensors.
  • SMARTSTART QR CODE- Simplest possible device installation. Compatible with Zwave hub including Control4, Fibaro, SmartThings, Vera and more..
  • Easy as plug and play. Start your smart home here. Z-Wave Plus certified. Certification number: ZC12-19080007.
Check Stock

Minoston Z-Wave Door Sensor Window Sensor Temperature and Humidity Sensor, Z-Wave 3 in 1 Sensor, Battery Powered, 700 Series, Z-Wave Hub Required, Alexa and Google Assistant Compatible(MSE30Z)

  • COMPATIBILITY: The Ecolink Door/Window is manufacturer tested to be compatible with the following ZWAVE Plus Home Automation HUBs or controllers: Samsung SmartThings Certified, V1, V2, V3. Vera Plus, Vera Edge, Vera Lite. Homeseer. Dlink staples connect. While it may work with your ZWAVE hub, Ecolink cannot guarantee it..
  • SIMPLE TO INSTALL: Easy installation by simply pulling the battery Tab to begin the Learning process. Natively compatible with SmartThings, it works with most brands of ZWAVE home security hubs. Features industry leading rare earth magnets that allow for up to a 5/8 inch sensor to magnet gap. Perfect for most door or window applications..
  • WHITE or BROWN housings INCLUDED: Both White or Brown plastic housing choice included to match any décor..
  • 3 YEARS BATTERY LIFE: Tamper sensing Premium design outlasts the competition and boasts a battery Life of up to 3 years..
  • Ecolink is a leading developer of low power, highly reliable wireless solutions, including a wide range of intelligent wireless security, sensing or home automation devices..
Check Stock

Aeotec Multisensor 6 with Battery, Z-Wave Plus 6-in-1 Motion, Temperature, Humidity, Light, UV, Vibration Sensor

  • 6-in-1 Zwave MultiSensor: smart motion sensors, z wave humidity, temperature sensor, Zwave light sensor, lux, UV, vibration sensor..
  • Up to 2 year battery life with 2 batteries or power via USB. 1 x CR123A included in the box..
  • Super-small at 1.65 inches. Can be installed in corner, in-wall, on shelf or recessed in ceiling with Recessor accessory..
  • Works with certified Z-Wave gateways and tested with Fibaro, HomeSeer, Indigo 7, openHAB, SmartThings, and Vera..
  • Z-Wave Plus certified. Certification number: ZC10-15070011.
Check Stock

Aeotec Multisensor 6 & Ceiling Recessor, Z-Wave Plus 6-in-1 Motion, Temperature, Humidity, Light, UV, Vibration Sensor, Battery included

  • 6-in-1 Zwave MultiSensor: smart motion sensors, z wave humidity, temperature sensor, Zwave light sensor, lux, UV, vibration sensor..
  • Up to 2 year battery life with 2 batteries or power via USB. 1 x CR123A included in the box..
  • Super-small at 1.65 inches. Can be installed in corner, in-wall, on shelf or recessed in ceiling with provided Recessor accessory..
  • Works with certified Z-Wave gateways and tested with Fibaro, HomeSeer, Indigo 7, openHAB, SmartThings, and Vera..
  • Z-Wave Plus certified. Certification number: ZC10-15070011.
Check Stock

AduroSmart ERIA Smart Home Hub / Gateway, Compatible with ZigBee Lighting/Sensors/Plugs/Thermostats/Locks, Works with ERIA APP/Alexa/Google Assistant/Apple Shortcuts/IFTTT

  • ...k your colors, change the brightness, store and play your favorite lighting scenes, set timers, and control your lighting through the ERIA App or through your Voice with Amazon Alexa or Google Assistant. Compatible with ERIA, Hue, Sylvania, Cree, Tradfri, GE and Sengled ZigBee smart bulbs. (Note. Does Not work with Zwave devices!). (see a detailed compatibility list on our website)..
  • Add ZigBee wireless smart sensors: Monitor your home while you are at home and away and be alerted and receive notifications on your smart phone when there is a situation that requires your attention. Compatible with ERIA, Centralite, Iris, Sylvania, Sengled & SmartThings ZigBee sensors. (Note! Does Not work with Zwave devices!). (Find a detailed Compatibility list on our website)..
  • Add ZigBee wireless smart plugs to control your appliances through the ERIA App or through your Voice with Amazon Alexa or Google Assistant or Set timers or create automations to automate your switching. Compatible with ERIA, Centralite, GE, IKEA, Iris, Leviton, Sylvania, Sengled, SmartThings ZigBee smart plugs..
  • Add a ZigBee wireless Smart lock to open, manage and monitor access to your Smart lock remotely through the ERIA app or through your Voice with Amazon Alexa or Google Assistant Compatib....
Check Stock

Aeotec Z-Stick Gen5 Z-Wave Hub Z-Wave Plus USB to Create Gateway (Ordinary White)

  • Works with Windows / Mac / Linux / Raspberry Pi 4 (2020 upgrade) to create a zwave hub for control of Z-Wave plus and Zwave devices, Tiny but powerful.
  • 1.1 x 0.4 x 3.5 inches in size and capable of controlling up to 232 different Z-Wave devices. package: 1x Z-Stick Gen5, 1x Manual, the others are not included.
  • Can be used to upgrade the firmware of compatible Z-Wave Plus devices that can accept OTA / wirelss firmware upgrades.
  • Compatible with Z-Wave enabled, home automation software including Home Assistant, Home Seer, Indigo 7, OpenHab, and OpenHab2. No software included.
  • Z-Wave Plus certified. Certification number: ZC10-15060006.
Check Stock

Aeotec Z-Stick 7 Plus, Zwave Plus USB to Create Z-Wave hub, Gateway Controller with 700 Series ZWave, SmartStart and S2, Works with Raspberry Pi 4, Compatible with Home Assistant

  • Works with Raspberry Pi, Windows, Mac, Linux to create a zwave hub for control of Z-Wave and Z-Wave Plus devices..
  • German engineered to use Aeotec exclusive Gen7 and 700 series technologies. Offers ZWave SmartStart and S2 security..
  • Faster, further. Z-Stick 7 wirelessly transmits up to 250% further in open-place space and with 18% faster CPU.
  • Compatible with Z-Wave enabled, home automation software including Home Assistant and Indigo 7. No software included..
Check Stock

Wink Connected Home Hub

  • ... tricks by telling it what to do when you’re asleep, awake, away, and back home..
  • Platform Compatibility: Control products from iOS, Apple Watch, Android, and Android Wear. Works with Amazon Alexa..
  • Supported Device Types: ZWAVE: Door Lock, Door/Window Sensor, Motion Sensor, Tilt Sensor, Light Switch, Light Dimmer, Appliance Module, ZIGBEE: Light Bulb, Light Switch, Outlet, Door/Window..
  • The Wink Shortcuts channel on IFTTT enables you to activate Wink Shortcuts through IFTTT triggers..
  • Beautifully designed mobile app that keeps you connected to your home no matter where you are. Supports WiFi, Bluetooth LE, Z-Wave, ZigBee, Lutron ClearConnect, Kidde. Can share devices while maintaining control of your own Wink account. Has ability to have multiple Wink Hubs connected to your Wink account. Kindly refer to the user manual and instruction video for reference..
  • A monthly subscription fee of $4.99 is required (effective May 20, 2020)..
  • All of your favorite smart products seamlessly connected in one simple app The Wink Hub will not automatically reconnect, since you've changed the credentials that the Hub currently knows. In order to update those credentials, power cycle your Wink Hub by unplugging it and plugging back in. Wait for it start flashing ....
Check Stock