Categories

Best Apricorn Sata Wire Driver

LSI Logic LSI00154 LSI20320IE 1CH U320 SCSI PCI Express 1 Int 1 Ext Channel Lp Leadfree Controller

  • ▶【10 Ports SATA 3.0 Adapter Card】: With this PCIe SATA card, you can add 10 SATA 3.0 6Gbps devices to your computer (No need to install a driver and contact the seller if need the driver).
  • ▶【80TB Expansion】: 10 Ports SATA 3.0 interfaces can expand to 80 TB, provide a high-volume database for your workstation and computer equipment. With using The chip JMB575+JMB1166 Chipset, improve this card more stable and compatible.
  • ▶【Supports 】: Supports Windows XP/8/10 / MAC / NAS / Ubuntu(Not recommended to use win 7, it may be stuck).
  • ▶【Easy to Install】: PCIe to SATA 3.0 Host Controller Card with a standard profile Bracket, can be used on PCIe X4/X8/X16 card slots, compatible with most size chassis on the market.
  • ▶【Note】: The 10-port does not support RAID. The RAID in INTEL is only for original SATA. It is an expansion card that cannot support third-party chips..
Check Stock

MZHOU PCIe SATA Controller Card 10 Port with 10 SATA Cables and Low Profile Bracket - 6Gbps SATA 3.0 PCIe Card,Support 10 Port SATA 3.0 Devices

  • With this PCIe SATA card, you can add 10 SATA 3.0 6 Gbps devices to your computer (No need to install a driver and contact the seller if need the driver)..
  • The PCIe SATA card contains ten SATA cables to simplify the connection!.
  • Use the 1166+JMB575 chip to improve card stability and compatibility..
  • Connect 10 mass storage devices at the same time. With Windows XP/8/10 / MAC / NAS / Ubuntu(Not recommended to use win 7, it may be stuck)..
  • Note: The 10-port does not support RAID. The RAID in INTEL is only for original SATA. It is an expansion card that cannot support third-party chips..
Check Stock

Rivo PCIe SATA Card, 8 Port with 8 SATA Cable, SATA Controller Expansion Card with Low Profile Bracket, Marvell 9215 Non-Raid, Boot as System Disk, Support 8 SATA 3.0 Devices(SA3014)

  • ➤8 Ports Adapter Card --- You could add 8 6Gb/s SATA 3.0 devices to your computer with this PCIe SATA card..
  • ➤For All PCs --- PCIe to SATA 3.0 8 Port Expansion Card with a low profile Bracket and 6 SATA Cables，compatible with 99% size chassis on the market..
  • ➤Chipset --- With using The chip 88SE9215+JMB583, improve this card more stable and compatible..
  • ➤System Support --- Connect 8 large capacity storage devices at the same time. Compatible with Windows XP / 7 / 8 / 10 / MAC / NAS / Linux OS.NO Driver required.( Please go to the SSD's website and find and install the NVMe driver for Windows/Linux OS if no drives appear in the Device/Disk manage ).
  • ➤You could make the system to boot from this SATA card but non RAID. But If your motherboard has RAID function, you could make a RAID with this SATA card..
Check Stock

Adaptec RAID 71605 Storage Controller 2274400-R

  • ▶【8 Ports SATA 3.0 Adapter Card】: Acasis SATA card is equipped with 8 SATA 3.0 interfaces and supports the simultaneous connection of 8 SATA hard disks, the transfer speeds up to 6Gbps, You could add 8 6Gb/s SATA 3.0 devices to your computer with this PCIe SATA card.
  • ▶【Easy to Install】: PCIe to SATA 3.0 Host Controller Card with a standard profile Bracket, PCIE Gen 2 X1 interface design, will works on PCIE X1, X4, X8, X16 slot, compatible with most size chassis on the market. Users need to check if PCs or Servers have at least one PCIE X1 slot on mother board before purchase.
  • ▶【80TB Expansion】: 8 Ports SATA 3.0 interfaces can expand to 80 TB, provide a high-volume database for your workstation and computer equipment. With using The chip JMB575+JMB1064 Chipset, improve this card more stable and compatible.
  • ▶【Supports Soft-RAID Mode】: The system comes with soft RAID and support four storage modes: RAID1 (SAFE Mode), AHCI1 (PM Mode), SPAN (BIG Mode) and RAIDO (FAST Mode). Supports Windows 7/ 8.1 / 10 / Linux, install the driver before add the HDD in system.
  • ▶【What You Get】 : 1 x 8-port SATA 3.0 controller card, 8 x SATA cable, 2 x SATA power splitter cable, 1 x user manual.
Check Stock

10Gtek Internal PCI Express SAS/SATA HBA RAID Controller Card, SAS2008 Chip, X8, 6Gb/s, Same as SAS 9211-8I

  • Controller: LSI SAS 2008 6Gbps SAS/SATA HBA RAID Controller Card.
  • Up to 6 G SATA and SAS link rates, SAS 2.0 complian.
  • Driver CD is included natively, you also can download it from 10Gtek website.
  • What You Get: 10Gtek ‎LSI-2008-8I HBA Card x1, Driver CD x1, Low-profile Bracket x1. Backed by 10Gtek 30 Days Free-returned, 1 Year Free Warranty and Lifetime Technology Support..
Check Stock

GODSHARK Dual M.2 PCIe Adapter, M.2 NVME SSD (M Key) or M.2 SATA SSD (B Key) 22110 2280 2260 2242 2230 to PCI-e 3.0 x4 Host Controller Expansion Card with Low Profile Bracket for PC Desktop

  • You could use M.2 NVME SSD & M.2 SATA SSD at the same time with this adapter on the motherboard without M.2 slot.
  • Up to 3200+ MB/s random Read and 1500+ MB/s Write with NVME SSD, perfect upgraded kit for PC.
  • Up to 420 MB/s random Read and 350 MB/s Write with M.2 SATA SSD.
  • Support both SATA or PCIe M.2 SSD 2230 2242 2260 2280 22110 (Please connect the motherboard with the SATA cable if you insert the M.2 SATA SSD (based B key)).
  • Support Windows XP/7/8/10 /Linux. ( Support Windows XP / 7 / 8 / 10, NO driver required ( Please go to the SSD's website and find and install the NVMe driver for Windows/Linux OS if no drives appear in the Device/Disk manage ) ).
Check Stock

CERRXIAN SATA Female to 40 pin Male 3.5 inch IDE Adapter for PC to SATA Hard Drive Interface Adapter

  • One Female SATA 7+15pin port, one 3.5Male PATA port (40-pin IDE), and one 4-pin Molex power connection Adapter.
  • SATA Female to 40 pin Male 3.5 inch IDE Adapter allows you convert hard drive interfaces to work with newer/older systems..
  • Converts Parallel ATA(PATA, ATA, IDE) to Serial ATA (SATA) Converts SATA to PATA/ATA/IDE/EIDE..
  • Package: Sata to Pata Interface Adapter x1..
Check Stock

GeeekPi Raspberry Pi Mini Tower NAS Kit, Raspberry Pi ICE Tower Cooler with PWM RGB Fan, M.2 SATA SSD Expansion Board, GPIO 1 to 2 Expansion Board for Raspberry Pi 4 Model B

  • This Raspberry Pi Mini Tower NAS kit contains an M.2 SATA SSD expansion board which can expand the mass storage for your Raspberry Pi. The case is made of ABS material,This kit turns your Raspberry Pi into a mobile mini-host..
  • NOTE: The RGB light on Fan and mood light will not light up unless installed driver, and OLED will not display any information untill you have enabled it !!! Please read the manual carefully and follow the steps to enable it.Please purchase M.2 SATA SSD 2280 mass storage device, It dose NOT support NVME SSD!!!.
  • M.2 SATA SSD 2280/2260/2240 mass storage adapter board,supports up to 2TB M2. SATA SSD solid-state drive.
  • Package Includes: 1 x ABS Mini Tower Case,1 x ICE-Tower CPU Cooling Fan,2 x Acrylic Side Panel,1 x 0.96inch OLED Display (Already mounted on the case ),1 x GPIO Edge expansion board,1 x M.2 SATA SSD Shield,1 x Assembly manual(Note: Raspberry Pi 4B is Not included in the package).
Check Stock

Qphone12 SATA PCI-E Adapter 10 Ports PCI Express X4 to SATA 3.0 6Gbps Interface Rate Expansion Card Controller for HDD ASM1166

  • [Efficient] - You could add four 6Gbps/s SATA 3.0 devices to your computer with the PCIe SATA card and 4 SATA cables. Backward compatible to 1.5 Gbps/s and 3 Gbps/s.
  • [High Performance] - The 4 port SATA controller based on Marvell 88SE9215 chip, more stable and wider compatible. Port Multiplier FIS-based and Command-based switching supported.
  • [Support System] - The SATA expansion card supports Windows XP/ 7/ 8/ 10/ Mac/ NAS/ Linux OS, no driver required. Support install Windows OS from Win10 PE.
  • [For All PCs] - Our PCIe to SATA III 4 port expansion card comes with a low profile bracket and 4 SATA cables, compatible with most chassis on the market. Fit for PCIe X1/ X4/ X8/ X16 slot.
  • [Please Note] - You could make the system to boot from this SATA card but non RAID. BUT If your motherboard has RAID function, you could make a RAID with this SATA card.
Check Stock

15Pin SATA Power Y Splitter Cable, Dayree 3pcs 8 Inch 15-Pin SATA Male to 2X 15-PIN Female Power Extension Cable Adapter for HDD Hard Drive

  • This SATA power splitter cable is an inexpensive solution for adding an extra SATA hard drive to a computer or server when no additional power supply wiring harness connectors are available.
  • Power is split from a 15-pin SATA female power connector to two standard 15-pin SATA male connectors, SATA power adapter splitter cable more convenient for you.
  • These power cable extensions are 8 inches (from male to female connection), can power more devices with your existing power supply.
  • Plug and work without installing any driver, plug and play, SATA power cable helps you charge more hard disks and devices.
  • The cable is Supports 3.3V, 5V, and 12V power voltages between SATA I, II, III drives, compatible with popular SATA devices.
Check Stock

Mailiya SATA Card, 6 Ports PCIe SATA 3.0 6Gbps Expansion Controller Card with 6 SATA Cables and Heatsink, None Raid, Support 6 SATA 3.0 Devices

  • Mailiya Pcie SATA III card Adopts ASMedia ASM1166 chip, the most stable Non-Raid PCIE 3.0 SATA controller solution to improve the stability and compatibility of the card..
  • With 6 Ports works on one Pcie to SATA 3.0 expansion card, you are able to add 6 SATA III 6Gb/s drive for your desktop, which will be a great improvement for the computer speed, and 6 SATA cables simplify the connection..
  • Plug and play, no driver needed, works on Windows, MAC OS, Linux System, and also works on Ubuntu system, perfect for IPFS mining rig..
  • Compatible with Serial ATA(SATA) Revision 3.0 specifications, auto switch to SATA 3.0 speed 6Gbps max. Backward compatible with SATA 1.0 and SATA 2.0. Support PCIE 1.0,2.0,3.0,4.0 protocol on motherboard PCIE X1,X4, X8, X16 slot..
  • Super heatsink is a great protect solution for your SSD, and solid capacitors for stabilizing the power supply. With LED indicates the status, leaves you no worry at all!.
Check Stock

Padarsey 4 Ports PCI SATA Raid Controller Internal Expansion Card with 2 Sata Cables, PCI to SATA Adapter Converter for Desktop PC Support HDD SSD

  • ...sion 1.0, and the accessory specification ATA series high-speed serialization..
  • 【Support Function】SATA3.0 card supports spread spectrum clock, asynchronous signal recovery, partial/sleep power saving mode, BIST and Loopback mode, interleaved rotation (optional), supports hot swap, asynchronous notification, ATAP driver, SWIT based on order and Fi..
  • 【100% Guarantee】If you have any questions about our products while using them, please feel free to contact our 24/7 customer service, we will provide a professional assistant for you..
Check Stock

Mailiya PCIe SATA Card with 4 SATA Cables, 4 Ports SATA 3.0 6Gbps Controller Expansion Card, Low Profile Bracket and Heatsink, Non-Raid, Support 4 SATA 3.0 Devices

  • With 4 Ports SATA card, you can add 4 SATA III 6 Gbps devices to your computer, and the equipped 4 cables simplifies the connection..
  • PCIe SATA III card based on ASMedia ASM1064 chip, more stable and wider compatible. you could make the system to boot from this SATA Card but non Raid, no raid keeps your data more safety..
  • Support interface: PCIe x1 slots, support PCI-e X4/ X8/ X16 at the same time. Compatible with Serial ATA(SATA) Revision 3.0 specifications, auto switch to SATA 3.0 speed 6Gbps max. Backwards compatible with SATA 1.0 and SATA 2.0..
  • Equipped with low profile bracket can also works for mini PC, and special made heatsink will keep your device under good performance and full-load operation..
  • The SATA expansion card works for Windows OS/MAC/NAS/Ubuntu, perfect for gaming pc and IPFS Mining Rig. Plug and play, no driver needed..
Check Stock