Categories

Best Arbor For Diamond Blades

Delta Diamond Piranha Premium 10 Inch Tile Saw Diamond Blade, 5/8\ Arbor, Continuous Rim, Wet Cutting Porcelain Tile, Ceramic Tile, Stone (10\)

  • PREMIUM TILE SAW BLADE - Made with higher levels of diamond compared to standard blades to provide excellent cutting and performance on a wide range of materials. Use on porcelain tile, ceramic tile, granite, marble, slate, terrazzo, or any similar material..
  • MINIMAL CHIPPING - Thin .090 cutting rim allows for the best combination of cutting speed and blade life while producing a first-class cut!.
  • EXTRA TALL RIM - 11MM tall to maximize blade life and prevent downtime during blade changes..
  • SPECIFICATIONS - 10" diameter X .090 wide X 5/8" arbor. Will fit any tile saw with 5/8" arbor shaft. Max safe rpm is 6,115..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charge..
Check Stock

4 Pack Combo 4-1/2 Inch Compact Circular Saw Blade Set with 3/8\ Arbor, 24T TCT /60T HSS /60# Diamond Disc Blade for Wood/Plastic/Sheet Metal/Tile Fast Cutting

  • Smooth & Rapid Cutting: Our masonry blade for the circular saw is designed to cut fast in most tile materials. Segment height 0.47"/12mm, arbor DM-1"/25.4mm, widened segment helps extend the blade's service life..
  • Sturdy Construction: The segmented diamond blade is made of high-performance diamond. Consistent diamond content makes the masonry blade more durable. Thinner kerf to increase the speed of cut while minimizing dust..
  • Simple Operation: Concrete blades can be universally used for dry or wet cutting. Super thin porcelain saw blade with free chips for cutting, standard 1" arbor match with the hand-held machine..
  • Complete Set: The masonry blade comes with great saw blades and reducing rings(the same number as saw blades), which can satisfy your various needs. It helps you to save time..
  • Wide Application: These marble cutting blades are ideal for general purposes, work well with concrete, stone, granite, brick, tile, and other hard materials. Whether you are a construction worker, plumber, tile installer, DIY enthusiast, this cutting tool is the perfect blade for you..
Check Stock

ROCKPORT Turbo 4 1/2 Diamond Blade for Angle Grinder Set - (3 Pack) Diamond Saw Blade & Grinder Blade for Dry/Wet Tile, Diamond Cutting Wheel for Stone, Granite, Concrete, 5/8\ - 7/8\ Arbor Tile Blade

  • CUTS THE TOUGHEST MATERIALS: Our 4 1/2" diamond blades for angle grinders are constructed with the highest precision so our diamond saw blades cut through porcelain tile, roof tile, brick, concrete, granite, marble, ceramic & masonry..
  • LONG LIFE: Built from high carbon steel with a diamond outer ring, our 4 1/2 inch diamond tile saw blades provide one of the longest lifetimes in the industry. Our grinder saw discs are diamond impregnated to minimize vibrations and breakage..
  • TURBO PACK FOR OPTIMIZED PERFORMANCE: Our 4 1/2 inch diamond blade & tile blade turbo pack includes 3 turbo tile blade & concrete saw blades 4 inch. These saw diamond blades ensure you have the right disc for the job..
  • COMPATIBLE WITH A VARIETY OF TOOLS: Our 4 1/2 inch saw glass tile diamond blades for porcelain have a 5/8 inch arbor making them compatible with tools such as: grinders, angle grinders, rock saw blades & concrete saws..
  • PROUDLY AMERICAN OWNED: Rockport products are American-owned and operated. With an enduring commitment to quality and design, we’re honored to be trusted by you and promise to always deliver lasting products to our loyal customers..
Check Stock

ROCKPORT Combo 4 1/2 Diamond Blade for Angle Grinder Set - (3 Pack) Diamond Saw Blade & Grinder Blade for Dry/Wet Tile, Diamond Cutting Wheel for Stone, Granite, Concrete, 5/8\ - 7/8\ Arbor Tile Blade

  • CUTS THE TOUGHEST MATERIALS: Our 4 1/2" diamond blades for angle grinders are constructed with the highest precision so our diamond saw blades cut through porcelain tile, roof tile, brick, concrete, granite, marble, ceramic & masonry..
  • LONG LIFE: Built from high carbon steel with a diamond outer ring, our 4 1/2 inch diamond tile saw blades provide one of the longest lifetimes in the industry. Our grinder saw discs are diamond impregnated to minimize vibrations and breakage..
  • COMBO PACK FOR OPTIMIZED PERFORMANCE: Our 4 1/2 inch diamond blade & tile blade combo pack includes: Turbo, Continuous and Segmented tile blade 4 inch. These saw diamond blades ensure you have the right disc for the job..
  • COMPATIBLE WITH A VARIETY OF TOOLS: Our 4 1/2 inch saw glass tile diamond blades for porcelain have a 5/8 inch arbor making them compatible with tools such as: grinders, angle grinders, rock saw blades & concrete saws..
  • PROUDLY AMERICAN OWNED: Rockport products are American-owned and operated. With an enduring commitment to quality and design, we’re honored to be trusted by you and promise to always deliver lasting products to our loyal customers..
Check Stock

16\ Laser Welded Diamond Saw Blade for Concrete, Brick, Block and Masonry, Heat Treated Blade Core, Dry or Wet, 1\ Arbor

  • MULTIPURPOSE - 16" laser welded diamond saw blades designed to cut concrete, reinforced concrete, brick, block, and other masonry.
  • PREMIUM DURABILITY - heat treated blade core reduces vibrations and core elasticity, so the blade body is rigid and cutting is smooth.
  • SHARP SEGMENTED TEETH - laser welded segments improves user safety (0.125" segment width) and drastically reducing the chance of segment breakage.
  • HIGH PERFORMANCE - superior bonding formula improves cutting speed against baseline diamond blades.
  • ARBOR SIZE & IDEAL RPM - 1" arbor & 2200 RPM.
  • USE WET OR DRY - high speed handheld saws or lightweight walk-behind saws recommended.
Check Stock

10\ Laser Welded Diamond Saw Blade for Concrete, Brick, Block and Masonry, Heat Treated Blade Core, Dry or Wet, DM 7/8\ Arbor

  • MULTIPURPOSE - 10" laser welded diamond saw blades designed to cut concrete, reinforced concrete, brick, block, and other masonry.
  • PREMIUM DURABILITY - heat treated blade core reduces vibrations and core elasticity, so the blade body is rigid and cutting is smooth.
  • SHARP SEGMENTED TEETH - laser welded segments improves user safety (0.100" segment width) and drastically reducing the chance of segment breakage.
  • HIGH PERFORMANCE - superior bonding formula improves cutting speed against baseline diamond blades.
  • ARBOR SIZE & IDEAL RPM - 7/8"-5/8" arbor & 3600 RPM.
  • USE WET OR DRY - high speed handheld saws or lightweight walk-behind saws recommended.
Check Stock

Makita 2 Pack - 4.5” Turbo Diamond Blades For Grinders & Circular Saws - Ultra-Fast Cutting For Concrete, Masonry & Brick - 5/8”, 20mm & 7/8” Arbors

  • ✅ 2 Makita 4-1/2” Premium Diamond Turbo Blades For FAST Concrete, Cinder Block & Brick Cutting | 4 1/2" x 0.79 x 7/8-Inch Arbor, Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor.
  • ✅ CUT 2-3X MORE concrete than lower quality blades due to Makita's Industry leading Diamonds and Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry.
  • ✅ QUICKLY & EFFORTLESSLY CUT through All Concrete, including general cured concrete, reinforced concrete, block & brick cutting in Wet or Dry conditions over an extra-long life span due to Makita’s Premium High Quality Industrial Diamonds with Makita’s proprietary bond that allows for optimal diamond exposure-to-bond wear ratio for accurate cutting PERFORMANCE, HIGHER TEMPERATURE RESISTANCE & STABILITY, cutting longer and faster than other blades in its class.
  • ✅ AVOID BLADEWEAR & Slow Downs with lower priced blades by relying on Makita’s proprietary matrix bond, allowing for fast, accurate and continuous cutting PERFORMANCE, PRECISION, LONGEVI....
Check Stock

Freud D0704DH Diablo 7-1/4\x4T PCD Tip TCG Hardie Fiber Cement Saw BLD,5/8 Arbor (Single Pack)

  • Application: The 24T wood blade is suitable for all types of wood, plastic, particle board, MDF, hardboard and plywood cutting. The HSS metal blade best for aluminum, wood, PVC, and other non-ferrous thin sheet. The diamond blade is structured to be able to cut concrete, roof tiles, blocks, bricks, granite and all other tiles without any hassle.
  • High Quality: The tungsten carbide tipped blade and diamond tipped blade are made of excellent high grade quality steel material that makes it a robust, the HSS blade is made of high-speed steel, more durability.
  • Cut Smooth: Sharp saw blade cutters with thin kerf enables fast efficient cuts. The 24 segment blade allows you to cut straight lines and is perfect for providing plunge cuts and long rip cuts.The 60 segment blade allows you to cut straight lines perfectly. The diamond blade is easy to use and cuts all tiles quickly.
  • Compatible: These circular saw blades are compatible to use with electric circular saw with arbor of  3/8in(9.5mm). Compatible with GALAX PRO 4 Amps 3500RPM Mini Circular Saw and 5.8 Amps Mini Circular Saw.
  • What You Get & Dimensions: 1 X 60 grit diamond blade, 1 X 44T HSS blade, 2 X 24T Carbide tipped blades, 1 X Information card.
  • saw blade diameter: 4-1/2" (115 mm), arbor size: 3/8"(9.5m....
Check Stock

DT-DIATOOL Turbo Mesh Diamond Blade 10 Inch with X Rim Segment for Tile Porcelain Ceramic

  • QUALITY MATERIAL: Gunpla diamond cutting blades are manufactured with high quality and durable heat-treated manganese steel and diamond. This angle grinding set has 3 of the most used cutting saws to make sure you are always ready for any project..
  • 3 PIECES SET: The includes 1 continuous rim for smooth cutting of marble, granite, tile & ceramics, 1 segmented rim for fast cutting for masonry, concrete, pavers, terrazzo, roof tile and 1 turbo rim diamond cutting saw blade..
  • CONVENIENT CUTTING: Fashioned to provide exceptional and efficient cutting performance, Gunpla diamond grinding saw blades ensure quick and precise cuts with clean and perfect results..
  • PERFECTLY HONED: Our cutting diamond blades perfectly sharpened to ease use and can be used several times before any new honing. They have a thinner kerf that favors increases the cutting speed and minimize dust..
  • IDEAL FEATURES: Diameter: 115mm (4.5inch).
  • Arbor size: 7/8 inch(22.2mm) with reduce ring 5/8 inch(16mm).
  • Speed max. 80m/s and can used dry or wet. Balanced plate reduces vibration for improved accuracy and better finish..
Check Stock

Oldham Circular Saw Blade 10 ' Dia 60 Teeth 13/16 ', 5/8 ' Diamd, Round Steel Carded3

  • For all building materials, including plywood chipboard, paneling, pressboard and Marlite.
  • Lasts 10 times longer than standard steel blades.
Check Stock

Makita 2 Pack - 4.5” Segmented Rim Diamond Blades For 4.5”+ Grinders & Circular Saws - Long-Lasting Cutting For Concrete, Masonry & Brick - 5/8”, 20mm & 7/8” Arbors

  • ✅ 2 Makita 4-1/2” Premium Segmented Diamond Blades For Long-Lasting & Reliable 1.25” Depth Concrete, Cinder Block & Brick CUTTING | 4 1/2" x 0.79 x 7/8-Inch Arbor, Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor.
  • ✅ CUT 2-3X MORE concrete than lower quality blades due to Makita's Industry leading Diamonds and Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry.
  • ✅ RELIABLY & EFFORTLESSLY CUT through All Concrete, including general cured concrete, reinforced concrete, block & brick cutting in Wet or Dry conditions over an extra-long life span due to Makita’s Premium High Quality Industrial Diamonds, and Makita’s proprietary industry leading bond matrix that allows for optimal diamond exposure-to-bond wear ratio for accurate cutting PERFORMANCE, HIGHER TEMPERATURE RESISTANCE & STABILITY, cutting longer and faster than other blades in its class.
  • ✅ AVOID BLADE WARPAGE, Premature Wear and slow down periods with lower priced blades by relying on Makita’s advanced air flo....
Check Stock

ILOVETOOL 6 inch Thin Edge Wet Diamond Blade Disc Lapidary Saw Gemstone Arbor hole 20mm Pack of 5Pcs

  • Product Name:Lapidary Diamond Saw Stone Cutting Blades 6 inch Thin Edge..
  • Outside Diameter :6" (150mm), Thickness:0.013"(0.32 mm) core thickness / 0.017" (0.43mm) on the edge where the diamond is..
  • Arbor hole :3/4"(20 mm) Can be used on 5/8" (16mm) or 1/2"(12.7mm) arbor with a bushing..
  • Advantages:achieving satisfactory cutting results and reducing unnecessary material consumption..
  • Used for Trimming:They are excellent for trimming small shapes into stones..
Check Stock

ILOVETOOL 4 Thin Edge Wet Diamond Blade Disc Lapidary Saw Tools Arbor Hole 1/2 Rim 0.25mm Pack of 10Pcs

  • Product Name:Thin diamond saw blades, Lapidary diamond saw..
  • Arbor hole : 1/2" (12.7mm), Outside Diameter : 100mm (close to 4"), Quantity: 10 Pcs.
  • Thickness: 0.009"(0.23mm) core thickness / 0.01" (0.25mm) on the edge where the diamond is..
  • Exclusively designed for processing materials for softer high value rocks like turquoise, gaspeite, opals..
  • These blades are manufactured by crimping Synthetic diamonds directly into the edge of the saw blade.
Check Stock