Categories

Best Arbor For Hole Cutter Sets

BOSCH 85610M 1/4 In Carbide Tipped 3-Wing Slotting Cutter Bit

  • Cuts slots for moldings, weather-stripping, and other edge details.
  • Carbide tips on steel body for long life.
Check Stock

Bosch 85527M 5/64 In. Carbide Tipped 3-Wing Slotting Cutter Bit

  • Cuts slots for moldings, weather-stripping, and other edge details.
  • Carbide tips on steel body for long life.
Check Stock

BOSCH 85609M 3/16 In. Carbide Tipped 3-Wing Slotting Cutter Bit

  • Cuts slots for moldings, weather-stripping, and other edge details.
  • Carbide tips on steel body for long life.
Check Stock

14-Pack Spot Weld Cutter Sets Double Sided, 3/8" HSS Spot Weld Cutter Remover Drill Bits Hex Sheet Metal Hole Cutter Remover for Power Drill Spot Welding

  • Durable Material : The preferred material used was top-quality steel which has excellent thermal resistance.The cutting blade has a diameter of 3/8 inches, and the arbor is of standard 1/4 inch size..
  • Double Sided : Double sided rotary cutter blade separates spot-welded panels more effectively than a panel cutter.when 1 side gets dull you simply have to flip the bit around on its arbor assembly..
  • Easily Separate : There is a spring-loaded pin in the center of these blades to guide the cutter to grind through the spot-welded material,drilling out spot-welds in a manner that leaves a very clean hole without distorting the sheet metal..
  • Fit For : Sharp double-sided blades for high efficiency. Suitable for thin stainless steel sheets, iron sheets, aluminum sheets, F.R.P or other thin metal sheets..
  • Spot Weld Cutter Tool：Easy to replace the blades when it begins to dull..
Check Stock

ZOENHOU 2 Set 3 Inch 75 mm Hole Saw with Arbor, 1 1/4 inch Cutting Depth HSS Bi-Metal Hole Cutter, Hole Drilling Tool Drill Bit Saw for Cutting Wood, Metal, Plastic, Fiberboard

  • TOUGH MATERIAL - Our heavy-duty hole saw is made of HSS M42 and BI metal with high wear resistance, high toughness, and high hardness, which has superior performance and higher cutting strength than other hole saws..
  • SMOOTH AND QUCIK CUTTING - The best cutting performance of bimetallic belts and HSS teeth with non-binding clean edge design can bring perfect cutting results of the bi-metal drill bit: easy and fast, smooth and clean cutting..
  • EFFICIENT AND DURABLE - 0.43 inch hex shank arbor with two pins protects the saw from slipping. 4 slots on the cutting blade push the arbor out of the circle drilling saw kit easily. Its extreme durability ensures no teeth breakage for any tough job..
  • ONE SET WORKS IT ALL- This complete HSS hole cutter including 2 pieces 2-inch hole saw, 2 pieces Allen wrench, 2 pieces hex shank arbor(0.43 in), and 4 pieces drill bit(2.8 x 0.24 in) are perfect for any power drill to cut round holes in drywall, wood, plastic, soft plaster, thin slate..
  • 100% RISK-FREE SHOPPING - If you are not satisfied with our 3 Inch 75 mm hole saw, you will get a 30-day warranty and 24/7 customer service after receiving it. Just remember that your satisfaction is our first priority..
Check Stock

LANIAKEA 10 Inch Hole Saw Bi-Metal 254MM Annular Hole Cutter 38MM Cutting Depth HSS Variable Tooth Pitch Holesaw Set with Hole Saw Arbor for Home DIYer

  • ☆ 10 inch hole saw, have high carbon steel bodies( with 8% cobalt) and HSS teeth, providing both flexibility and durability..
  • ☆ The hole cutter have a cut depth of 38mm. Diameter: 10 inches(254mm), board thickness: 6mm. Package comes with heavy duty holesaw arbor, 1 hex....
  • ☆ The 10" hole saw has variable tooth pitch for fast, smooth cutting and extended hole saw life, chip holes make plug removal easy..
  • ☆ HSS cutter teeth are used for most materials, such as wood, chipboard, plywood, non-laminated plastics, plastics, plasterboard and so on..
  • ☆ 10 inch hole saw are designed chiefly for the home-improver and DIYer. For example, to make your own pendulum wall clock..
Check Stock

ZOENHOU 2 Set 4 Inch 102 mm Hole Saw with Heavy Duty Arbor, Hole Cutter HSS Bi-Metal, Heavy Duty Steel Blade Hex Shank Drill Bits Smooth and Fast Cutting of Wood, Iron, Hard Plastic, Galvanized Pipe

  • TOUGH MATERIAL - Our heavy-duty hole saw is made of HSS M42 and BI metal with high wear resistance, high toughness, and high hardness, which has superior performance and higher cutting strength than other hole saws..
  • SMOOTH AND QUCIK CUTTING - The best cutting performance of bimetallic belts and HSS teeth with non-binding clean edge design can bring perfect cutting results of the bi metal drill bit: easy and fast, smooth and clean cutting..
  • EFFICIENT AND DURABLE - 0.44 inch hex shank arbor with 2 pins protects the saw from slipping. 4 slots on the cutting blade push the arbor out of the circle drilling the saw kit easily. Its extreme durability ensures no teeth breakage for any tough job..
  • ONE SET WORKS IT ALL - This complete HSS hole cutter including 2 pieces 4-inch hole saw, 2 pieces Allen wrench, 2 pieces hex shank arbor(0.44 in), and 4 pieces drill bit(2.8 x 0.24 in) are perfect for any power drill to cut round holes in drywall, wood, plastic, soft plaster, thin slate..
  • 100% RISK-FREE SHOPPING - If you are not satisfied with our 4-Inch 102 mm hole saw, you will get a 30-day warranty and 24/7 customer service after receiving it. Just remember that your satisfaction is our top priority..
Check Stock

Grizzly Industrial C2069 - Panel Cutter - Convex, 3/4\ Bore

  • Note: stop throwing away the used APKT16504 carbide inserts, uses the two unused corners of the APKT inserts to extends the tools life of the already used APKT 1604 carbide inserts.
  • Suitable for generic face milling. Surface milling for medium roughing. Recommend for CNC and traditional milling machines..
  • Uses the two unused comers of APKT 1604 carbide inserts..
  • Cutter Diameter: 3 inch. Bore Diameter: 1 inch. Number of Inserts: 5. Arbor Hole C: 1".
  • Extends the life of already used APKT insert by using the two unused edge of the insert which typically used in a 90-degree end mill cutter..
Check Stock

BOSCH 85530M 5/32 In Carbide Tipped 3-Wing Slotting Cutter Bit

  • Cuts slots for moldings, weather-stripping, and other edge details.
  • Carbide tips on steel body for long life.
Check Stock

Modern Motorcycles ATV GENERATORS Heads Valve SEAT Cutter 14 Set Carbide Tipped

  • Concave Cutters - High Speed Steel - Arbor Type - Form Relieved.
  • Dia. Of Circle: 3/4 - Dia. Of Cutter: 3 3/4 - Hole Size: 1 1/4.
Check Stock

6-3/8 Inch Hole Saw with Heavy Duty Arbor, 6 3/8”Recessed Lighting Hole Saw with 1-1/2 Inch Cutting Depth, Bi-Metal Hole Cutter for Smoothly Cutting Ceiling Tile Drywall Plywood Plaster Metal Plastic

  • ... drill precise holes fast in varied ceiling materials like drywall, plywood, ceiling tile, fiberglass, cement board, plaster and MDF.
  • 6Inch recessed light fixtures requiring the 6-3/8" hole saw that suitable for most major brands of 6-Inch (162 mm) recessed lighting fixtures.
  • 【Wide Applications 162MM Hole Drilling Cutter】Made with a continual rim, Bi-Metal hole saw cut metal and wood quickly and cleanly without tearing the material, widely used for cutting 6inch holes in metal, plaster, wood, plastic, acrylic-board, steel and aluminum.
  • Essential home hole cutter for ceiling lights, recessed light, cornhole board, air ducts, speakers, range hood.
  • 【Smooth and Fast Cutting】Designed with the non-binding clean edge and sharp carbide teeth, the heavy duty 6-3/8” hole saw can cutting faster, smoother, and more precise holes than most hole saw on the market.
  • Widely used in plate holes, household wood, galvanized pipe, gypsum board and other opening operations.
  • 【Package & Size】The package includes 1pcs 6-3/8Inch hole saw with 7/16” shank heavy duty arbor, 3pcs HSS drill bits and 1pcs hex wrench.
Check Stock

Shars 4 Pieces 60 Degree HSS Dovetail Cutter Set 404-1620 P}

  • Cutting diameter: 3/8", 1/2", 3/4", 1-3/8".
  • Designed to take the place of arbor and threaded hole type cutters.
Check Stock

Lord & Hodge 1073A-1 Grommet Kit

  • Number of Grommet Sets Per Kit: 24 Tools with kit: Cutting Block, Hole Cutter, Inserting Punch and Die..
  • A handy, compact, economical kit complete with tools and 12 rustproof brass grommets for immediate replacements or repairs in canvas or plastic..
  • Easy to follow instructions #0, 1/4" inner diameter Manufacturer: Lord & Hodge..
  • Tools with kit: Cutting Block, Hole Cutter, Inserting Punch and Die. No. 1073A 0: 1 4.
Check Stock